PureGear Qi 2.0 Wireless Charging Pad User Manual

May 15, 2024
PURegeaR

PureGear Qi 2.0 Wireless Charging Pad

Specs

Qi 2.0 Wireless Charging Pad

  • Input: 5VDC/3A; 9VDC/2.22A; 12VDC/1.67A
  • Output: Up to 15W (Fast Charge)

Wall Charger

  • Input: AC110-240V~50-60Hz 0.6A Max
  • Output: 3.6-6V/3A; 6.2-9V/2A; 9.2-12V/1.5A (18W Max)
  • Charging time may vary based on the device

CAUTION
DO NOT place any credit cards or other types of magnetic material near the charging pad. This product can ONLY be charged using the provided adapters and cables. Do not attempt to disassemble the wireless charging pad as it may short circuit or damage the product. Keep this product in a dry and ventilated space. Do not place in direct heat or use in high humidity environments. Do not use organic solvents to clean the surface.

Using your Qi 2.0 Wireless Charging Pad

  1. Connect the USB-C™ cable to the USB-C port on your Qi 2.0 Wireless Charging Pad.
  2. Plug the USB-C connector into the wall charger.
  3. Plug in the wall charger.
  4. Place your Qi-enabled device on the Fast Wireless Charging
  5. Pad with the screen facing up. The LED is white when your device is charging.

Charging Indicator Light Status

  • ORANGE LIGHT: The device is not charging properly.
  • Please reposition your device until you see the white light come on.
  • WHITE LIGHT: The device is charging.

Limited Lifetime Warranty

This product is fully warranted against defects in materials and workmanship for the lifetime of the product, so long as the manufacturer continues to make this product. If a product fails due to a manufacturing defect, we will replace it upon proper proof of purchase by the original purchaser. Replacement products will be subject to shipping and handling charges. Damages through normal wear and tear, alteration, misuse, neglect, accident, or service by anyone other than the
authorized service centre, or act of God, are not covered by this warranty.

For all warranty claims, the product must be returned by PureGear’s return policy. MagSafe is a trademark of Apple Inc., registered in the U.S. and other countries. USB-C is a trademark of the USB Implementers Forum. The ‘Qi2’ symbol is a trademark of the Wireless Power Consortium. All trademarks and trade names are used for reference purposes only and are the property of their respective owners.

FCC Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the e user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Interference Statement (cont.)
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 8 inches between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals