PuregeaR qi2 20W Duo Magnetic Wireless Charger User Manual
- August 5, 2024
- PURegeaR
Table of Contents
PuregeaR qi2 20W Duo Magnetic Wireless Charger
Product Specifications
- Product Name: 20W Qi 2.0 DUO MAGNETIC WIRELESS CHARGER
- Wireless Charger:
- Fast charging capability
- Compatible with MagSafe cases
- Indicator light for charging status
- Fast Charge Wall Charger:
- USB-A to USB-C cable included
- Works with AirPods 2nd generation or newer
Product Usage Instructions
Charging Devices
- Connect the USB-A to USB-C cable to the USB-C port on the base of the Duo Magnetic Wireless Charger.
- Insert the USB-A connector into the included wall charger and plug it into a power outlet.
- Place your device on the charging pad. Charging will start automatically.
Charging Indicator Light Status
The indicator light on the Magnetic Charging Stand provides information.
- SOLID BLUE: The device is charging.
- FLASHING BLUE: The device is not charging properly. Reposition your device until the light turns solid blue.
- SOLID GREEN: The Charger is idle and ready to charge.
Note: The indicator light will flash blue and green before remaining green in standby mode.
Important Notes
Avoid placing magnetic materials near the charging pad. Use only the provided adapters and cables for charging. Do not disassemble the charging pad.
Frequently Asked Questions
Q: Can I charge AirPods on this wireless charger?
A: Yes, you can charge AirPods 2nd generation or newer on the base of the Duo Magnetic Wireless Charger.
Q: What do the different indicator light colors signify?
A: Solid blue indicates charging, flashing blue means improper charging and solid green indicates idle/ready-to-charge state.
Q: Is it safe to use this charger in high-humidity environments?
A: It is not recommended to use this charger in high-humidity environments. Keep it in a dry and ventilated space.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.
Specs
Wireless Charger:
- USB-C’™ Input: 5V/3A; 9V/3A; 12V/2.5A
- Magnetic Wireless Stand Output: 15W
- Wireless Base Output: 5W
- Total Combined Output: Up to 20W
Fast Charge Wall Charger:
- Output: 5V/3A; 9V/3A; 12V/2.5A
- Charging time may vary based on the device
- CAUTION: DO NOT place any credit cards or other types of magnetic material near the charging pad. This product can ONLY be charged using the provided adapters and cables.
- Do not attempt to disassemble the wireless charging pad as it may short circuit or damage the product. Keep this product in a dry and ventilated space.
- Do not place in direct heat or use in high humidity environments. Do not use organic solvents to clean the surface.
Using your Fast Wireless Charging Pad
- Connect the USB-A to USB-C cable to the USB-C port on the base of the Duo Magnetic Wireless Charger.
- Insert the USB-A connector into the included wall charger and plug the charger into the wall.
- Place the back of your Apple iPhone MagSafe device against the Duo Magnetic Wireless Charger stand until it automatically aligns and snaps into place.” Charging will begin automatically.
- To charge a second device or AirPods, simply place it on the base of the Duo Magnetic Wireless Charger. Charging will begin automatically.
- Works with MagSafe cases. Non-MagSafe cases must be removed before charging.
- AirPods 2nd generation or newer.
Charging Indicator Light Status for Magnetic Charging Stand:
- SOLID BLUE: The device is charging.
- FLASHING BLUE: The device is not charging properly. Please reposition your device until you see the blue light turn solid blue.
- SOLID GREEN: The wireless charger is idle and ready to charge.
- PLEASE NOTE: The indicator light will flash blue and green and then remain green while in standby mode.
- The bottom base charger does not have an indicator light status.
Limited Lifetime Warranty
- This product is fully warranted against defects in materials and workmanship for the lifetime of the product, so long as the manufacturer continues to make this product.
- If a product fails due to a manufacturing defect, we will replace it upon proper proof of purchase by the original purchaser.
- Replacement products will be subject to shipping and handling charges. Damages through normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than the authorized service center, or act of God, are not covered by this warranty.
- For all warranty claims, the product must be returned under PureGear’s return policy. iPhone, MagSafe, and AirPods are trademarks of Apple Inc., registered in the U.S. and other countries.
- The “Qi2” symbol is a trademark of the Wireless Power Consortium.
- USB-C is a trademark of the USB Implementers Forum.
- All trademarks and trade names are used for reference purposes only and are the property of their respective owners.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 8 inches between the radiator & your body.
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used by the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
www.pure-gear.com
©2024 F00229PG
Documents / Resources
|
PuregeaR qi2 20W Duo Magnetic Wireless
Charger
[pdf] User Manual
11132PG, YJW-11132PG, YJW11132PG, qi2 20W Duo Magnetic Wireless Charger, qi2
Wireless Charger, 20W Duo Magnetic Wireless Charger, 20W Wireless Charger, Duo
Magnetic Wireless Charger, 20W Charger, Wireless Charger, Magnetic Wireless
Charger, Magnetic Charger, Charger
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>