PureGear pureboom Aura Wireless Speaker User Manual

June 12, 2024
PURegeaR

PureGear pureboom Aura Wireless Speaker

PureGear-pureboom-Aura-Wireless-Speaker-PRODUCT

Specifications

  • Product Name: PureBoom Aura Wireless Speaker
  • Bluetooth Range: 2-3 ft (0.6-0.9m)
  • Model Number: 2AIIF-11038PG
  • Website: pure-gear.com

Connecting / Bluetooth Pairing

  1. Ensure the PureBoom Aura Wireless Speaker is within 2-3 ft (0.6-0.9m) of the device you will be connecting to.
  2. Turn on your device’s Bluetooth. Most devices will automatically detect your speaker.
  3. Locate and select PureBoom Aura. It will indicate that your speaker is now connected or paired.
  4. If your device does not automatically detect your speaker, make sure Bluetooth is turned on, do a SEARCH for PureBoom Aura and then click CONNECT.

Operating the PureBoom Aura Wireless Speaker
Insert operating instructions here…

FAQ (Frequently Asked Questions)
Q: How can I reset the PureBoom Aura Wireless Speaker?
A: To reset the speaker, press and hold the power button for 10 seconds until the speaker turns off, then turn it back on.

Connecting / Bluetooth Pairing

  1. Make sure the PureBoom Aura Wireless Speaker is within 2-3 ft (0.6-0.9m) of the device you will be connecting to.
  2. Turn on your device’s Bluetooth. Most devices will automatically detect your speaker. Locate and select “PureBoom Aura”. It will indicate that your speaker is now connected or paired.
    If your device does not automatically detect your speaker, make sure Bluetooth is turned on, do a SEARCH for “PureBoom Aura” and then click CONNECT.

Operating the PureBoom Aura Wireless Speaker

When playing music

  • To pause/play, short press the button.
  • To play the previous track, short press the button.
  • To play the next track, short press the button.
  • To decrease the volume, long press the button.
  • To increase the volume, long press the button.

When on a call

  • To answer a call, short-press the button, and double-click to call back.
  • To reject an incoming call, long press the button.

Pairing 2 Speakers

  • Make sure both speakers are not connected to your phone/device’s Bluetooth.
  • Turn on both speakers. Speakers will prompt “Bluetooth Mode”.
  • Double tap the button on one of the speakers. You will hear a tone confirming the connection is complete.
  • Once connected you will see a blue light flash on the primary speaker and a steady blue light on the paired speaker.

Features and Specifications

  • Frequency response: 100Hz-20KHz
  • Charging Input: 5V/1A
  • Li-ion battery size: 1200mAh
  • Impedance: 3Ω

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RFexposure requirements. The device can be used in portable exposure condition without restriction.
FCC ID: 2AIIF-11038PG

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals