PUREGEAR 10847PG True Wireless Stereo Earphones User Manual

PUREGEAR 10847PG True Wireless Stereo Earphones

Product Information

Specifications

• Model: 10847PG
• Operation Range: 10m (with no obstacle)
• Bluetooth version: V5.3
• Charging time: 1.5~2.0hrs
• Music time: up to 6 hrs
• Supported Profiles: HFP/HSP/A2DP/AVRCP
• Battery capacity (earphones): 3.7V 30mAH
• Battery capacity (charging case): 3.7V 300mAH

Product Usage Instructions

Power-on and Pairing

1. Take both earphones out from the charging case to power them on (white LED blinks).
2. To pair, put both earphones into the charging case to activate them, then take them out. They will automatically power on and pair with each other.
3. Search for ‘AG04’ on your mobile phone and connect it.

Power-off and Switch Mode

1. To power off, put the earphones back into the charging case, and they will auto-power off (LED will be solid white).
2. To switch modes, press the MF button on the left or right earbuds for 2 seconds to switch between Normal/Passthrough/ANC modes.

Charging

1. Insert the earphones into the charging case for charging. The LED will be solid white during charging and turn off when fully charged.
2. To charge the case, use a Type C cable. The red LED will flash during charging and turn solid red when fully charged.

FAQs

Q: What should I do if my earphones fail to connect?

A: Try the following steps: Take out both earphones, then re-insert them into the case to activate the earphones. If earphones fail to be charged, charge the case via Type C cable.

Q: How do I reject an incoming call?

A: Press the MF button on the left or right earphone for 2 seconds to reject the incoming call. Alternatively, use your mobile phone to reject the call.

Q: How do I activate voice assistant?

A: When on standby, touch the left/right earphones three times to activate the voice assistant (like Siri).

OVERVIEW

For first-time pairing

Take out both two earphones, then re-insert them into the case to activate the earphones.

Notes:
If earphones fail to be charged, pis charge the case via Type C cable (for details, pls follow the below steps).

How to Pair

• Put both earphones into the charging case to activate them, then take them out, both earphones will auto-power on and pair with each other.
• After one side white LED blinks quickly, and the other side’s white LED flashes slowly.
• Then search AG04 on mobilephone and connect it.

Notes: If fail to connect, pls try the following steps by hand.

1. Take one of the earbuds out of the charging case.
2. When the white LED blinks quickly, a long touch sensor area for 6s, with LED turnoff, put the earbud back into the charging case.
3. Take out the other earbud and do the same operation.

Take both earbuds out of the charging case at the same time, when one side’s white LED blinks quickly, the other side’s white LED flashes slowly (flashes every 10 seconds), and then both sides are connected successfully. Search AG04 on a mobilephone and connect it.

FUNCTIONS

• Power-on
  Take earphones out from the charging case and they will auto power on. (white LED blinks)

• Power-off
  Put earphones back into the charging case, it will auto power off (LED will be solid white)

• Switch mode
  Press the MF button on the left or right earbuds for 2 seconds to switch Normal / Passthrough/ ANC on the mode by Tums

• Play/Pause
  When listening to music, touch the right/left earphone twice to play/pause.

• Voice Assistant
  When standing, touch left/right earphones three times to activate voice assistant (like siri)

• Reject
  Press the MF button on the left or right earphone for 2 seconds to reject the incoming call. Or use your mobile phone to reject the incoming call.

• Answer Call/Hang up call
  Touch the left or right earphone twice to answer the incoming call and touch twice again to end it.

• Charge the earphones
  Insert the earphones into the charging case, the LED will be solid white when charging, and after fully charging, the white LED will turn off.

• Charge the case
  Please charge the case via Type C cable. The red LED flashes when charging, and turns to solid red when fully charged, When in low battery, the white LED flashes 4 times and turns off.

PRODUCT PARAMETER

• Model: 10847PG
• Operation Range: 10m (with no obstacle)
• Bluetooth version: V5.3
• Charging time: 1.5~2.0hrs
• Music time: up to 6 hrs
• Battery type: Li-ion
• Bluetooth profiles: HFP/HSP/A2DP/AVRCP
• Battery capacity (earphones): 3.7V 30mAH
• Battery capacity (charging case); 3.7V 300mAH

All technical data should be subject to practical performance.

Notes:
Please arrange using time properly as your hearing may be damaged by using the device for a long time.

IMPORTANT TIPS

1. Before using the earphones, please read the manual carefully and keep it for future reference.
2. The earphones need to be fully charged prior to first-time use.
3. If the earphones is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by qualified manufacturer.
5. If the earphones cannot be found by your phone, please check whether it is in pairing mode; if left disconnected for a long while, the earphones will exit pairing mode, please re-enter the mode, if a procedure error of your phone occurs, reboot it; if a procedure error of the earphones occurs, reboot or reset it.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>