PureGear 2AIIF-11037PG PureBoom Aura Mini Wireless Speaker User Manual
- June 12, 2024
- PURegeaR
Table of Contents
PureGear 2AIIF-11037PG PureBoom Aura Mini Wireless Speaker
Product Information
Specifications:
- Product Name: PureBoom Aura Mini Wireless Speaker
- Bluetooth Range: 2-3ft (0.6-0.9m)
- FCC ID: 2AIIF-11037PG
- Website: pure-gear.com
Product Usage Instructions
Connecting/Bluetooth Pairing:
- Ensure the PureBoom Aura Mini Wireless Speaker is within 2-3 ft (0.6-0.9m) of the device you want to connect to.
- Turn on your device’s Bluetooth. Most devices will automatically detect the speaker. If not, toggle Bluetooth on, search for “PureBoom Aura Mini,” and click connect.
Operating the PureBoom Aura Mini Wireless Speaker:
Press the power button to turn on the speaker. Adjust volume and playback
controls as needed.
Pairing 2 speakers:
To pair two speakers, follow the same steps as Bluetooth pairing for the
first speaker on the second device.
FCC Statement
FCC Compliance FCC ID: 2AIIF-11037PG
FAQ
- Q: How do I reset the PureBoom Aura Mini Wireless Speaker?
A: To reset the speaker, press and hold the power button for 10 seconds until the LED indicators flash.
Connecting / Bluetooth Pairing
- Make sure the PureBoom Aura Mini Wireless Speaker is within 2-3 ft (0.6-0.9m) of the device you will be connecting to.
- Turn on your device’s Bluetooth. Most devices will automatically detect your speaker. Locate and select “PureBoom Aura Mini”. It will indicate that your speaker is now connected or paired. If your device does not automatically detect your speaker, make sure Bluetooth is turned on, do a SEARCH for “PureBoom Aura Mini” and then click CONNECT.
Operating
When playing music:
- To pause/play, short press the ****button.
- To play previous track, short press the ****button.
- To play next track, short press the ****button.
- To decrease the volume, long press the ****button.
- To increase the volume, long press the ****button.
When on a call:
- To answer a call, short-press the ****button, and double-click to call back.
- To reject an incoming call, long press the ****button.
Pairing 2 Speakers
- Make sure both speakers are not connected to your phone/device’s Bluetooth.
- Turn on both speakers. Speakers will prompt “Bluetooth Mode”.
- Double-tap the ****button on one of the speakers. You will hear a tone confirming the connection is complete.
- Once connected you will see a blue light flash on the primary speaker and a steady blue light on the paired speaker.
Features and Specifications
- Frequency response: 100Hz-20KHz
- Charging Input: 5V/1A
- Li-ion battery size: 800mAh
- Impedance: 4Ω
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- (1) this device may not cause harmful interference,
- (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
FCC ID: 2AIIF-11037PG
pure-gear.com
©2024 | F00225PG | 64959PG