UNITECK Unifix 100 BM Bimini Arch Mounting Bracket Installation Guide
- May 15, 2024
- UNITECK
Table of Contents
UNITECK Unifix 100 BM Bimini Arch Mounting Bracket
Product Specifications
- Product Name: Unifix 100 BM
- Designed for: Securing Unisun photovoltaic panels from 50 to 120W
- Compatible Tube Diameter: 20 to 28 mm
- Material: Marine stainless steel
- Weight: 1.8 Kg
Product Usage Instructions
Description:
The Unifix 100 BM bracket is designed to secure Unisun photovoltaic panels
from 50 to 120W for installations from 50 to 240W. It can be mounted on bimini
hoops with 20 to 28 mm diameter tubes. The bracket features 2 multi-position
ball-and-socket joints, allowing you to mount the solar panel parallel to the
bimini. Its marine stainless steel structure ensures durability in marine
environments.
Recommendations:
- Mount the bracket only on tubes with sufficient load-bearing capacity.
- Avoid shaded areas or objects that could create shadows on the panel.
- An opening needs to be made in the bimini cover to attach the support to the frame.
Safety Instructions:
Ensure to use of the provided elements for installation and fixing according to the instructions provided. Use the specified torque for different screw sizes:
- Screw M4: Torque 2.80 Nm
- Screw M6: Torque 8.80 Nm
- Screw M8: Torque 21.50 Nm
Installation – Fixing:
Follow the detailed instructions provided in the manual for fixing the
bracket securely. Make sure to consider the additional load of the panel based
on its weight.
Warranty:
The product is covered by a 2-year warranty for any manufacturing defects
or faults. After the warranty period, repair services are available with an
accepted quotation.
Frequently Asked Questions (FAQ):
-
Q: Can the Unifix 100 BM bracket be used with panels above 120W?
A: The Unifix 100 BM bracket is specifically designed for panels from 50 to 120W. It is recommended to use it within this wattage range for optimal performance. -
Q: Is the Unifix 100 BM bracket suitable for non-marine environments?
A: While the Unifix 100 BM bracket is designed with marine stainless steel for durability in marine environments, it can also be used in non-marine settings where applicable.
Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions carefully before using the product.
DESCRIPTION
The Unifix 100 BM bracket has been specially designed to secure your Unisun photovoltaic panels from 50 to 120W for installations from 50 to 240W.
- It can be fitted to bimini hoops with 20 to 28-mm diameter tubes.
- Equipped with 2 multi-position ball-and-socket joints, the Unifix 100 BM bracket lets you mount your rigid solar panel parallel to your bimini.
- Thanks to its marine stainless steel structure and fastenings, it is perfectly suited to use in marine environments.
RECOMMENDATIONS
- Mount the Unifix mounting bracket only on tubes with sufficient load-bearing capacity.
- Avoid shaded areas or objects that could create shadows.
- To attach the support to the frame, you need to make an opening in the bimini cover.
Support Compatible UNISUN panel
| Unisun
50.12 M
| Unisun
50.24 M
| Unisun
55.12 BC
| Unisun
80.12 M
| Unisun
100.12 M
| Unisun
100.24 M
| Unisun
120.12 BC
Unifix 100 BM = 1,8 Kg| x 1
4,1 Kg
| x 1
4,1 Kg
| x 1
4,1 Kg
| x 1
6,3 Kg
| x 1
7,0 Kg
| x 1
7,5 Kg
| x 1
7,0 Kg
Take into consideration the additional load with the panel :
SAFETY INSTRUCTIONS
- Take appropriate measures to prevent accidents during your mounting session.
- If the mounting bracket are exposed to sunlight for a long period, there is a risk of getting burnt. Protect yourself accordingly.
- After a complete installation, please check that your brackets and panels are securely fastened.
INSTALLATION FIXING
List of provided elements.
N°3 Elements are removable and slippery
During assembly, take precautions to avoid the risk of falling overboard
Recommended tightening torque
Nb. Average friction coefficient μ=0,20 / tightening at 50% of the elastic
limit.
Screw | Torque |
---|---|
M4 | 2.80 Nm |
M 6 | 8,80 Nm |
M 8 | 21,50 Nm |
- Screw element N°1 and 2 to the panel
- Pre-tighten N°4 and N°5 (this operation must be carried out twice).
- Pre-tighten the assemblies fitted previously. (This operation must be carried out twice).
- Fix the assembled structure to the bimini frame (this operation must be carried out twice).
- Position the bracket and then tighten the pre-set screws.
WARRANTY
The warranty covers any manufacturing defect or fault for 2 years from the date of purchase (pieces and labour).
The warranty does not cover :
- Normal wear and tear of parts.
- Installation errors.
In the event of defects, return the product to your distributor by attaching :
- proof of purchase date (receipt, invoice…)
- a note explaining the defect.
Caution : Our after-sales service does not accept returns with postage
due.
After the warranty period, our after-sales service will ensure the repair of
your product once a provided quotation has been accepted.
After-sales service contact :
Uniteck- 1 Avenue de Rome
Zae Via Europa – bâtiment Cassis
34350 Vendres -France
France mail: sav@uniteck.fr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>