UNITECK UNIFIX 20S Signage Bracket Instruction Manual
- June 14, 2024
- UNITECK
Table of Contents
UNITECK UNIFIX 20S Signage Bracket Instruction Manual
Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions carefully and thoroughly before using the product.
UNIFIX 20S / 50S
Unifix supports have been specially designed to mount your Unisun photovoltaic panels : – Unifix 20 S : Unisun 10.12M / 10.24M / 20.12M / 20.24M – Unifix 50 S : Unisun 30.12M/50.12M / 55.12BC
Easy to install, they are fixed on signal masts using flanges with M8 screws (flange not supplied).
Thanks to their aluminium structure and corrosion-resistant stainless steel screws, they are ideal for outdoor use.
Equipped with a multi-position tilting system, Unifix brackets allow for an optimization of your panel’s performance depending on the chosen orientation.
To connect the the panel / regulator / battery, we recommend that you use the
Unconnected 1.6 ready-touse kits that optimizes your electrical performance
and simplifies installation (kit for connecting 1 panel)
A 30° angle is very common for applications in France throughout the year. If
your use is seasonal, prefer 50°.
Unifix 20 S and 50 S are designed to withstand winds of 100 Km/h at all time and up to 130 Km/hoccasionaly.
PANEL COMPATIBILITY
With the design based on the use of Oblong drilling, Unifix can be used with
different kind of panels on the market. Unifix 20S and50S are meant to fix 1
panel only, with the spacings and dimensions of panels as indicated below.
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with the panel:
Fastening: to prevent large quantities of snow from accumulating behind the
sensor, install appropriate barrier grids.
The position of the solar panel influences your electrical production. Choose
the most optimal inclination and orientation to suit your environment. Avoid
shaded areas or objects that are a source of shadow (eg tree)
Before attaching and connecting, please observe:
- the maximum distances between each element shown below.
- connecting order
SAFETY INSTRUCTIONS
- Take the appropriate measures to prevent accidents during your mounting steps.
- If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk of getting burnt. Make sure to protect yourself accordingly.
- When finished, check and ensure that all of your brackets and panels are fixed properly.
UNIFIX 20 S AND 50 S
Easy to install, Unifix 20S/50S can be fixed either :
WARRANTY
The warranty covers any defect, manufacturing flaws for 1 year from the date
of its purchase (Pieces and workforce).
Warranty does not cover:
– normal wear of parts
– falty mounting of bracket
In case of failure, return the product to your distributor by attaching:
– the dated proof of purchase (receipt, bill…)
– explanatory note of the failure
Caution: Our after-sales service does not accept carriage forward/ collected
returns.
After the warranty, our after-sales service ensures repairs after acceptance
of a quotation.
After-sales service contact :
Uniteck- 1 Avenue de Rome
Zae Via Europa – bâtiment Cassis
34350 Vendres -France
E-mail : sav@uniteck.fr
Fax : +33 (0)4 88 04 72 20