5 SF Uniteck Signaling Mounting Bracket Instruction Manual
- June 13, 2024
- UNITECK
Table of Contents
UNIFIX 5 SF / 20 SF / 50 SF / 100 SF
The road sign mounting bracket
Dear customer, thank you for purchasing one of our Uniteck products. Please
read all the instructions carefully and thoroughly before using the product.
DESCRIPTION
Unifix brackets have been specially designed to fix your Unisun photovoltaic panels:
- UNIFIX 5SF : UNISUN 5.12M
- UNIFIX 20SF : UNISUN 10.12M / 10.24M / 20.12M / 20.24M
- UNIFIX 50SF : UNISUN 30.12M / 50.12M / 50.24M / 55.12BC
- UNIFIX 100SF : UNISUN 80.12M / 100.12M / 100.24M / 110.12BC
Easy to install, they attach either:
- on a round mast with a diameter of 40 to 60 mm (flange included)
- on a signaling posts using flanges with M8 or M10 screws (not included)
With their galvanized steel structure and corrosion-resistant stainless-steel screws, they are perfectly suited for outdoor use.
SAFETY INSTRUCTIONS
- Take the appropriate measures to prevent accidents during your mounting steps.
- If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk of getting burnt. Make sure to protect yourself accordingly.
- When finished, check and ensure that all of your brackets and panels are fixed properly.
Before attaching and connecting, please observe:
- the maximum distances between each element shown below.
- connecting order
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with the panel:
| Mount | Panel |
|---|---|
| Unifix 5 SF = 0,8 kg | UNISUN 5.12M =0,8kg |
| Unifix 20SF = 1,1kg | UNISUN 10.12M / 10.24M / 20.12M / 20.24M =1,3kg / 1,3kg / |
2kg / 2kg
Unifix 50SF = 1,5kg| UNISUN 30.12M / 50.12M / 50.24M / 55.12BC=3,1kg / 4,1kg /
4,1kg / 3,8kg
Unifix 100SF = 2,2kg| UNISUN 80.12M / 100.12M / 100.24M / 110.12BC 6,3kg / 7kg
/ 7,5kg / 7kg
Fastening: to prevent large quantities of snow from accumulating behind
the sensor, install appropriate barrier grids.
The position of the solar panel influences your electrical production. Choose
the most optimal orientation to suit your environment. Avoid shaded areas or
objects that are a source of shadow (eg tree)
INSTALLATION – FIXATION
List of spare parts for all models:
| N°1 X1
---|---
| N°2 X1
| N°4 X12
| N°5 X12
| N°6 X12
Recommended Tightening torque
| Vis | Couple |
|---|---|
| M5 | 5,10 Nm |
| M 6 | 8,80 Nm |
| M 8 | 21,50 Nm |
| M | 44,00 Nm |
Assembly
- Place your panel on part N°1 and screw it. Check that the panel does not interfer with the mast during assembly.
| N°1 X1
---|---
| N°3 X4
| N°5 X4
| N°6 X4
-
Place and screw parts N°2. Step to be repeted 4 times.
| N°2 X4
---|---
| N°3 X8
| N°5 X8
| N°6 X8 -
Screw the whole set to the mast with M8 or M10 screws and 2 adapted U-bolts
-
Please check that your panel and mount are properly fixed.
WARRANTY
The warranty covers any defect, manufacturing flaws for 2 years from the date
of its purchase (Pieces and workforce).
Warranty does not cover:
- normal wear of parts
- falty mounting of bracket
In case of failure, return the product to your distributor by attaching:
- the dated proof of purchase (receipt, bill…)
- explanatory note of the failure
Caution: Our after-sales service does not accept carriage forward/ collected
returns.
After the warranty, our after-sales service ensures repairs after acceptance
of a quotation.
After-sales service contact :
Uniteck- 1 Avenue de Rome
Zae Via Europa – bâtiment Cassis
34350 Vendres -France
E-mail : sav@uniteck.fr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>