Uniteck 300 B Unifix Basic Mounting Bracket User Guide
- June 13, 2024
- UNITECK
Table of Contents
Uniteck 300 B Unifix Basic Mounting Bracket
Product Information
The CHARGE UNIFIX is a mounting bracket designed for fixing Unisun photovoltaic panels or equivalent. It comes in two variants: 300 B and 500 B.
- 300 B Dimensions: A – 1070 mm, B – 1100 mm
- 500 B Dimensions: A – 1120 mm, B – 1150 mm
The Unifix brackets are made of galvanized steel and come with corrosion- resistant stainless-steel screws, making them suitable for outdoor use. They have a multi-position tilting system that allows for optimization of panel performance based on the chosen orientation.
The electrical performance of the panels varies based on the inclination and orientation. The performance percentages are as follows:
| East| South-East| South| South-West| West
---|---|---|---|---|---
93% Inclination| 93%| 93%| 93%| 93%| 93%
45% Inclination| 90%| 96%| 100%| 96%| 90%
25% Inclination| 78%| 88%| 91%| 88%| 78%
0% Inclination| 55%| 66%| 68%| 66%| 55%
Product Usage Instructions
To install the Unifix bracket, follow these steps:
- Select a suitable flat surface (e.g., wall, concrete floor, wood frame) for mounting.
- Ensure that the surface is horizontal or vertical.
- Align the bracket with the chosen surface and mark the drilling points.
- Drill holes at the marked points.
- Securely fix the bracket using the provided stainless-steel screws.
- To optimize panel performance, adjust the tilting angle of the bracket based on the desired orientation.
Note: For connecting the panel, regulator, and battery, it is recommended to use the Uniconnect 1.6 handy kits for improved electrical performance and simplified installation.
Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions carefully and thoroughly before using the product.
DIMENSION
UNIFIX 300 B / 500 B
Unifix brackets have been specially designed to fix your Unisun photovoltaic panels or equivalent (see compatible panels part):
- Unifix B for your Unisun panels 100.12M (x2) / 100.24M (x2) /120.12BC (x2) / 150.12M / 165.12BC / 150.24M / 200.12BC / 200.24M / 300.12M.
| 300 B | 500 B | |
|---|---|---|
| A | 1070 mm | 1120 mm |
| B | 1100 mm | 1150 mm |
- Easy to install, Unifix B can be fixed on a horizontal or vertical flat surface (e.g. wall, concrete floor, wood frame).
- With their galvanized steel structure and corrosion-resistant stainless-steel screws, they are perfectly suited for outdoor use.
- Equipped with a multi-position tilting system, Unifix brackets allow for an optimization of your panel’s performance depending on the chosen orientation.
- To connect the the panel/regulator/battery, we recommend that you use the Uniconnect 1.6 handy kits that optimizes your electrical performance and simplifies installation (kit for connecting 1 panel).
PANEL COMPATIBILITY
UNIFIX 300 B
- With the design based on the use of oblong drilling, Unifix can be used with different kind of panels on the market.
- Unifix B is meant to fix 1 or 2 panel(s), with the spacings and dimensions of panels as indicated below.
300 B| Mounting center distances (mm)
H (e) L (e)
| Pannel maximum dimension (mm)
H (p) L (p)
| Maximum weight allowed (kg)
---|---|---|---
1 Panel| Portrait| X| 1070| X| 1300| 35
Landscape| 1070| X| 1100| X
2 Panels| Landscape| 505| X| 550| X
500 B
| Mounting center distances (mm)
H (e) L (e)
| Pannel maximum dimension (mm)
H (p) L (p)
| Maximum weight allowed (kg)
---|---|---|---
1 Panel
|
Landscape
|
1120
|
X
|
1150
|
X
|
35
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with the panel:
Support Panels
Unifix 300 B = 9.2 kg
Unifix 500 B = 11.2 kg
| Unisun 100.12M (x2) / 100.24M (x2) = 14kg / 15kg / 14kg / 9,8kg / 9,3kg /
/120.12BC (x2) / 150.12M / 165.12BC / 10.8kg / 12,9kg / 13.6kg / 15.5kg 150.24M / 200.12BC / 200.24M / 300.12M
- Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate barrier grids. The position of the solar panel influences your electrical production. Choose the most optimal inclination and orientation that suits your environment. Avoid shaded areas or objects that are a source of shadow (eg tree).
SAFETY INSTRUCTIONS
- Take the appropriate mesures to prevent accidents during your mounting steps.
- If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk of getting burnt. Make sure to protect yourself accordingly.
- When finished, check and ensure that all of your brackets and panels are fixed properly.
UNIFIX 300 B / 500 B
Recommended tightening torque: Nb. Mean coefficient of friction μ=0.20 / Clamping at 50% of yield strength.
| Screw | Torque |
|---|---|
| M5 | 5,10 Nm |
| M 6 | 8,80 Nm |
| M 8 | 21,50 Nm |
| M 10 | 44,00 Nm |
PREPARATION
- Fold the two reinforcements by hand and screw it.
- Fold the two reinforcements by hand and screw it.
- Fix the 2 pieces n°94 on the frame of your Unisun solar panel. Pre-tighten the nuts. The final tightening will be done at the end of the assembly.
- Fix the 2 pieces n°95 on the pieces n°94 according to the chosen inclination.
- Fix your bracket on a flat surface (hard floor or rigid wall) with 28 screws adapted to your surface (screws and dowels not supplied).
WARRANTY
The warranty covers any defect, or manufacturing flaws for 1 year from the
date of its purchase (Pieces and workforce).
Warranty does not cover :
- Normal wear of parts.
- Faulty mounting of the bracket.
In case of failure, return the product to your distributor by attaching:
- The dated proof of purchase (receipt, bill…)
- Explanatory note of the failure.
- Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions carefully before using the product.
After-sales service contact:
- Uniteck- 1 Avenue de Rome
- Zae Via Europa – bâtiment Cassis
- 34350 Vendres -France
- E-mail: sav@uniteck.fr.
- www.uniteck.fr.
- Rev 2 – Vers 34
- 15/09/2023
- CO00501
- www.uniteck.fr.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>