UNITECK Unifix 30.12M Pushpit Mounting Bracket Instruction Manual
- June 14, 2024
- UNITECK
Table of Contents
UNITECK Unifix 30.12M Pushpit Mounting Bracket
Specifications
- Product Name: NICHARGE UNIFIX 50.2 WB
- Compatible Panel: Unisolar 20.24 W
- Weight: 2.3 kg
- Bracket Material: Marine stainless steel
- Tubing Compatibility: 20-45 mm diameter
- Minimum Tube Length: 130 mm
Product Description:
The NICHARGE UNIFIX 50.2 WB is an orientable and inclinable mounting bracket designed to optimize the performance of your Unisolar 20.24 W solar panel based on the chosen orientation. It is compatible with balconies and handrails with tubes ranging from 20 to 45 mm in diameter.
Electrical Performance:
| Orientation| Inclination| Performance
---|---|---|---
East| South-East| 93%
South| 93%
South-West| 93%
West| 93%
North-West| 93%
South| South-East| 90%
South| 96%
South-West| 100%
West| 96%
North-West| 90%
West| South-East| 78%
South| 88%
South-West| 91%
West| 88%
North-West| 78%
North| South-East| 55%
South| 66%
South-West| 68%
West| 66%
North-West| 55%
Installation Instructions
- Ensure that the surface you are mounting the bracket on has sufficient bearing capacity.
- Choose the optimal location for your solar panel, considering the inclination and orientation that suits your environment.
- Mount the Unifix 50.2 WB bracket on the balcony or handrail tubing using the provided screws and bolts.
- Fasten your Unisolar 20.24 W solar panel to the bracket using the recommended tightening torque for the screws:
| Screw Size | Tightening Torque |
|---|---|
| M5 | 5.10 Nm |
| M6 | 8.80 Nm |
| M8 | 21.50 Nm |
| M10 | 44.00 Nm |
FAQ
Q: What is the weight of the Unifix 50.2 WB bracket?
A: The weight of the Unifix 50.2 WB bracket is 2.3 kg.
Q: What is the compatibility of the bracket with Unisolar panels?
A: The Unifix 50.2 WB bracket is compatible with Unisolar 20.24 W panels.
Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions carefully and thoroughly before using the product.
DESCRIPTION
Unifix 50.2 WB brackets have been specially designed to fix your Unisun 30.12M / 50.12M and 55.12BC photovoltaic panels.
They can be installed on all balconies or handrails with tubes from 20 to 45 mm in diameter (minimum tube length: 130 mm).
Thanks to their structure and marine stainless steel screws and bolts, they are perfectly suited for use in saline environments.
Tilting and adjustable, the Unifix 50.2 WB mounting brackets optimize your panel’s performance depending on the chosen orientation.
Electrical performance according to your panel
inclination and orientation
| | | | |
East| 93%| 90%| 78%| 55%
South-East| 93%| 96%| 88%| 66%
South| 93%| 100%| 91%| 68%
South
West
| 93%| 96%| 88%| 66%
West| 93%| 90%| 78%| 55%
- The adjustment of the mount influences your panel’s performances. Choose the optimum tilt and orientation according to your environment.
- For more energy, it is possible to use two solar systems:
- panels with the same orientation: installation in parallel (two panels + one regulator + one wiring kit + parallel connectors)
- panels with opposite orientations: two separate installations (one panel + one controller + wiring kit) x2
UNIFIX 50.2 WB
PANEL COMPATIBILITY
Unifix 50.2 WB can fix 1 panel with 4 holes in the frame at the spacing as below:
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with the panel:
| Mount | Panel |
|---|---|
| Unifix 50.2 WB = 2,3 kg | Unisun 30.12M /50.12M / 55.12BC |
Fastening: to prevent large quantities of snow from accumulating behind
the sensor, install appropriate barrier grids.
The position of the solar panel influences your electrical production. Choose
the most optimal inclination and orientation to suit your environment. Avoid
shaded areas or objects that are a source of shadow (eg tree)
Before attaching and connecting, please observe:
- the maximum distances between each element shown below.
- connecting order
SAFETY INSTRUCTIONS
- Take the appropriate measures to prevent accidents during your mounting steps.
- If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk of getting burnt. Make sure to protect yourself accordingly.
- When finished, check and ensure that all of your brackets and panels are fixed properly
ASSEMBLY – FIXING
Recommended tightening torque
Nb. Average friction coefficient µ=0,20 / Tightening at 50% of the elastic limit.
| Screw | torque |
|---|---|
| M5 | 5,10 Nm |
| M 6 | 8,80 Nm |
| M 8 | 21,50 Nm |
| M 10 | 44,00 Nm |
Fix the base on the pushpit or on the handrail (tube diameter from 20 to 45 mm).
According to the tube diameter, use the 2 appropriate U-bolts.
Fix the item N°2 on the bracket N°1.
Fix your solar panel.
To avoid the phenomenon of galvanic corrosion, position the isolating pieces
between the frame of the solar panel of anodized aluminium and the stainless
steel bracket.
INSTALLATION – FIXATION
Once you have chosen the inclination and orientation, put the 2 locking pins to block the rotation of the Unifix.
Check that your mount and solar panel are fixed properly.
WARRANTY
The warranty covers any defect, manufacturing flaws for 1 year from the date of its purchase (Pieces and workforce).
Warranty does not cover:
- normal wear of parts
- falty mounting of bracket
In case of failure, return the product to your distributor by attaching:
- the dated proof of purchase (receipt, bill…)
- explanatory note of the failure
Caution: Our after-sales service does not accept carriage forward/ collected returns.
After the warranty, our after-sales service ensures repairs after acceptance of a quotation. After-sales service contact :
Uniteck- 1 Avenue de Rome
Zae Via Europa – bâtiment Cassis
34350 Vendres -France
E-mail : [email protected]
Fax : +33 (0)4 88 04 72 20