Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions carefully and thoroughly before using the product.

Description

Unifix brackets have been specially designed to fix your Unisun photovoltaic panels or equivalent (see compatible panels part):

• Unifix 150 B for your Unisun 150.12M / 150.12BC panels or panels with a width of up to 700 mm.

Easy to install, Unifix 100B can be fixed on a horizontal or vertical rigid flat surface (e.g. wall, concrete floor, wood frame).
With their galvanized steel structure and corrosion-resistant stainless-steel screws, they are perfectly suited for outdoor use.
Equipped with a multi-position tilting system, Unifix brackets allow for an optimization of your panel’s performance depending on the chosen orientation.

To connect the the panel / regulator / battery, we recommend that you use the Uniconnect 1.6 ready to use kits that optimizes your electrical performance and simplifies installation (kit for connecting 1 panel)

Panel Compatibility

Thanks to its adaptive design, Unifix allows the fixing of different panels on the market.
Unifix 150B accepts 1 panel, with the panel spacing and dimensions as shown below.

Centre distance and panel dimensions

Recommendations

Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with the panel:

Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg tree)

Safety Instructions

• Take the appropriate mesures to prevent accidents during your mounting steps.
• If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk of getting burnt. Make sure to protect yourself accordingly.
• When finished, check and ensure that all of your brackets and panels are fixed properly.

Recommended tightening torque

Nb. Mean coefficient of friction µ=0.20 / Clamping at 50% of yield poin

• Fix the 2 n°38 pieces on the frame of your Unisun solar panel according to the width of your panel (see diagram below). Pre-tighten the nuts. The final tightening will be done at the end of the assembly.

UNIFIX 150 B

Unifix is equipped with a multi-position tilt system. (10 positions). Set the desired tilt depending on the desired orientation.

• Fix the 2 pieces n°38 and n°37 according to the chosen inclination.
• Fix your bracket with 10 screws adapted to the supporting surface (screws and dowels not supplied).

Warranty

The warranty covers any defect, manufacturing flaws for 1 year from the date of its purchase (Pieces and workforce).
Warranty does not cover:
– normal wear of parts
– falty mounting of bracket
In case of failure, return the product to your distributor by attaching:
– the dated proof of purchase (receipt, bill…)
– explanatory note of the failure
Caution: Our after-sales service does not accept carriage forward/ collected returns.
After the warranty, our after-sales service ensures repairs after acceptance of a quotation.
After-sales service contact :
Uniteck- 1 Avenue de Rome
Zae Via Europa – bâtiment Cassis
34350 Vendres -France
E-mail : sav@uniteck.fr
Fax : +33 (0)4 88 04 72 20

References

• Fabricant Français

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>