iHip APP2-BT Wireless Technology Earphone User Manual
- June 6, 2024
- iHip
Table of Contents
APP2-BT
Wireless Technology
Earphones
User Manual
Specification:
Bluetooth spec: V5.1
Bluetooth profiles supported: HSP, HFP, A2DP, AVRCP
Frequency range:2 .402GHz — 2 .480GHz
Operation range: up to 10 meters
Transmission Power: class 2
Battery: 3.7V/55mAh
Charging time: 2 hours
Play music time: up to 3 hours
Standby time: up to 180 days
Size: 57129mm
Weight: 11g
How to Use:
-
To turn it on:
Press for 3 Seconds while the blue light turns on. -
To turn it off:
Press for 3 Seconds while the red light flashes 3 times. -
To pair it:
Once turned on, earbuds will automatically enter pairing mode. A blue and red light will flash alternatively. -
To answer a phone call:
Click to answer a phone call. -
To reject a phone call:
Press for 2 seconds to reject the call. -
To play the music:
Click for play and pause the music.
Caution:
- When not in use for a prolonged period, it is recommended that you turn off the headset to lengthen battery life.
- When the power red light flashes, it is recommended that charge the headset not less than 2 hours.
Safety Caution
- Keep the item away from sharp objects.
- Do not place a heavy objects on the headset.
- Away from microwave items.
- Do not force or distorted the headset.
- Keep away from oil, chemical, or other organic liquid items.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
© 2021 Zeikos, Inc. iHip is a trademark of Zeikos, Inc., Registered in the
U.S. and other countries. The illustrated product and specifications may
differ slightly from that supplied. All other trademarks and trade names are
those of their respective owners. The United States and international patent
pending. All Rights Reserved. For ages 12+up. This is not a toy. Designed by
iHip, Manufactured in China.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by “Zeikos Inc.” is under
license. Other trademarks and trade names are those of their respective
owners. One Year Limited Warranty. Customer service:
1-800-500-4434 To activate your product
warranty go to our website www.ihip.com & register this
product.
19 Progress St Edison, NJ 08820 www.ihip.com|
#ihip| Find us on Facebook. Keyword: Ihip: Portable Entertainment
---|---|---