UNITECK UNIFIX 600 B Mounting Bracket for Solar Panels Instruction Manual
- June 9, 2024
- UNITECK
Table of Contents
UNIFIX 600 B Mounting Bracket for Solar Panels
Instruction Manual
UNIFIX 600 B
UNIFIX 600 B Mounting Bracket for Solar Panels
Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions carefully and thoroughly before using the product.
DESCRIPTION
The Unifix 600 B Unifix brackets have been specially designed to fix your
Unisun photovoltaic panels or equivalent (see compatible panels part)
Easy to install, Unifix 600 B can be fixed on a horizontal or
flat surface (e.g. wall, concrete floor, wood frame)
With their galvanized steel structure and corrosion-resistant stainless-steel
screws, they are perfectly suited for outdoor use.
Equipped with a multi-position tilting system, Unifix brackets enable an
optimization of your panel’s performance depending on the chosen orientation.
Tilt angle can be adjusted from 10° to 60° by 10° angle.
UNIFIX 600 B
PANELS COMPATIBILITY
With the design based on the use of Oblong drilling Unifix allows the fixing
of different panels of the market.
Unifix 600 B accepts panels with spacing holes and dimensions as mentioned
below:
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with a sufficient load carrying
capacity. Take into account the additionnal weight with panel
| Mount | Panel |
|---|---|
| Unifix 600 B = 15,1 kg | Maximum 35 kilos |
- Fastening : to prevent the accumulation of large quantities of snow behind the sensor, install appropriate barrier grids.
- The position of the solar panel influences your electrical production. Choose the most optimal inclination and orientation to suit your environment. Avoid shaded areas or objects that can be a source of shadow (eg tree)
SAFETY INSTRUCTIONS
- Take the appropriate measures to prevent accidents during your mounting steps.
- If the brackets and the mounting tools are exposed to sunlight for a long period, there is a risk of getting burnt. Make sure to protect yourself accordingly.
- When finished, check and make sure that all of your brackets and panels are fixed properly.
UNIFIX 600 B – ASSEMBLY
Spare parts : **Recommended tightening torque**
Nb. Mean coefficient of friction µ=0.20 / Clamping at 50% of yield point
| Screw | Torque |
|---|---|
| M5 | 5,10 Nm |
| M 6 | 8,80 Nm |
| M 8 | 21,50 Nm |
| M 10 | 44,00 Nm |
Assembly :
-
Fold the end of each N°95 part with your hand and screw them together
-
Fold the ends of N°235 with your hand and screw them.
-
Equipped with a multi-position tilting system, Unifix brackets allow for an optimization of your panel’s performance depending on the chosen orientation.
Electrical performance according to inclination and panel orientation
| 0° | 30° | 60° | 90°
East| 93%| 90%| 78%| 55%
South-East| 93%| 96%| 88%| 66%
South| 93%| 100%| 91%| 68%
South West| 93%| 96%| 88%| 66%
West| 93%| 90%| 78%| 55%
-
Place N°235 on N°95. Choose the tilt angle and screw.
-
Screw N°237 at the end of N°236.
-
Place N°236 with N°235 and adjust the height according to your panel’s dimensions such as below.
PLEASE NOTE that the maximum spacing is 190 cm. The screws must have the greatest spacing possible.
-
Place N°238 with N°235 and adjust the height depending on your panel such as below:
-
Screw your solar panel to N°237 and N°238.
WARRANTY
The warranty covers any defect, manufacturing flaws for 2 yearS from the date
of its purchase (Pieces and labour).
Warranty does not cover:
– normal wear of parts
– falty mounting of bracket
In case of failure, return the product to your distributor by attaching:
– the dated proof of purchase (receipt, bill…)
– explanatory note of the failure
Caution: our after-sales service does not accept carriage
forward/collected returns.
After the warranty, our after-sales service ensures repairs after acceptance
of a quotation.
After-sales service contact :
Uniteck- 1 Avenue de Rome
Zae Via Europa – bâtiment Cassis
34350 Vendres -France
E-mail : sav@uniteck.fr
Fax : +33 (0)4 88 04 72 20
****www.uniteck.fr
Documents / Resources
|
UNITECK UNIFIX 600 B Mounting Bracket for Solar
Panels
[pdf] Instruction Manual
UNIFIX 600 B Mounting Bracket for Solar Panels, UNIFIX 600 B, Mounting Bracket
for Solar Panels, Mounting Bracket, Bracket
---|---