MAD CATZ Pilot PRO Wireless RGB Gaming Headset User Guide
- June 12, 2024
- MAD CATZ
Table of Contents
MAD CATZ Pilot PRO Wireless RGB Gaming Headset
Product Information
- Product Name: P.I.L.O.T. PRO
- Language: English
- What’s in The Box: Product, 930mAh Battery,3.5mm Cable (1m), Type-C Cable (1.2m), Detachable MIC
- Product Dimension: 20221690mm
- Weight: 345g
- Backlight: RGB
Product Usage Instructions
- Connectivity options:
- 2.4G
- Bluetooth (BT)
- 3.5mm
- Wireless Connection:
- 2.4G frequency range: 2400-2480mHz
- Working distance: 15M (unobstructed)
- Battery Charging:
- Charging voltage: DC 5V 500mA
- Charging time: approximately 2.5 hours
- Battery Life:
- Bluetooth mode with LED on: approximately 15 hours
- Bluetooth mode with LED off: approximately 60 hours
- 2.4G mode with LED on: approximately 13 hours
- 2.4G mode with LED off: approximately 40 hours
- Latency:
- Latency in 2.4G mode: [No information provided]
Please refer to the user manual for detailed instructions on how to use the P.I.L.O.T. PRO.
What’s in The Box
- Transmitter x 1
- User Manual x1
- Headphone x1
- Cloth Ear Pad x1set
- Detachable Mic x1
- 3.5mm Audio Cable x1
- Type-C Cable x1
- Mic sponge sleeve x1
Product Dimension
Product Parameter
Basic Parameter
- Battery: 930mAh
- Weight: 345g
- Backlight: RGB
- MIC: detachable
- Size: 20221690mm
- 3.5mm cable: 1m
- Type-C cable: 1.2m( USB charge cable)
Speaker Parameter
- Driver unit: $50mm * 10 mm(H)
- Sensitivity : 105dB‡3dB SPL@1kHz
- Impedance: 24=15% OHMS
- Frequency response: 20~20KHz
- Total harmonic distortion: # 5%
- Power rating: 10mW-15mW(max)
- Buzz & Rating: sine wave 0.49V
- Load test: normal 10mW 24 hours
Electrical Parameters
- Connectivity: 2.4G /BT/ 3.5mm
- Wireless: 2.4G
- 2.4G frequency range: 2400-2480mHz
- Working distance: 15M (unobstructed)
- Charging voltage: DC 5V 500mA
- Charging time: approx. 2.5h
- Bluetooth: approx. 15h with LED on/60h with LED off
- 2.4G: approx. 13h with LED on/40h with LED off
- Latency in 2.4G mode: <35ms
Microphone Parameter
- Driver unit: & 6mm * 2.7mm(H)
- Sensitivity: -42‡3 dB
- Directivity: omnidirectional
- Impedance: 2.2KOHMS
- Frequency response: 100~10KHz
- Total harmonic distortion: # 5%
- Operating voltage: DC 1.0V~10V
- Current consumption: Max 0.5mA
Interface
Function
- Lighting-Effect
- Power
- MIC (switch between 2.4G/BT)
- Volume
- Indicator Light (power on/off and pairing)
- Type-C Port(for charging only)
- Audio Jack (8) MIC Jack
Pairing via 2.4G/BT
- Plug 2.4G receiver into device, turn on headphone, and it will process pairing automatically.
- BT mode: press and hold MIC button for 3sec to enter BT pairing, when Indicator Light flashes in blue,search Mad Catz P.I.L.O.T. PRO in PC/phone and connect.
Audio cable
When 3.5mm audio cable is used to connect the headset and devices, no need to tap on the Power button.
Button function details
Power Button:
- Press and hold the Power button for 3 seconds to turn on, you will hear a beep to confirm.
- Vice versa, press and hold the Power button for 3 seconds to turn off, and another beep will sound to confirm.
- Tap to play/pause
Lighting-Effect Button:
- Tap once to change the effect.
- Default lighting loop setting: RB Streaming, red, green, blue, purple, monochromatic breathing and LED off.
Microphone Button:
- MIC is automatically on as default when the power is on.
- Tap to turn the MIC on/off.
- Double taps to turn MIC ENC on/off.
- Press and hold for 3 seconds for Bluetooth mode. When the Indicator LED flashes in blue slowly, double press the Power button (blue LED flashes quicker) to enter Bluetooth pairing.
- When blue LED stops flashing and is constantly on, it means that the pairing is completed.
- Press and hold for 3 seconds (green LED turns on) to switch back to 2.4G mode.
Volume Scroll Wheel:
- Scroll up and down to turn the volume up and down.
Lower Battery Prompt:
- When battery is running out, the headphone will beep once every sec. Please charge headphone immediately for better battery longevity.
LED Indicator:
- 2.4G Model: Green LED constantly on
- BT Model: Blue LED constantly on
- Low Battery: Red LED flashes
- Charging: Red LED constantly on
- Fully Charged: Green LED constantly on
- BT Pairing: Blue LED flashes
Availability of Audio Output:
- Wired (3.5mm AUX) 2. Wireless (2.4G) 3. Wireless (Bluetooth)
How to Replace (PU/Cloth) Ear Pads
- Find the notches at the top and bottom of an earcup
- Apply the lips of an ear pad from one notch to the other
- Make sure half of lips are in place
- Rotate clockwise or anti-clockwise gently, then the ear pad is installed successfully
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>