BEHA LGB Bluetooth Heater App User Guide

: May 15, 2024
: BEHA

Table of Contents

BEHA LGB Bluetooth Heater App
USE OF THE APP
DESCRIPTION OF THE THERMOSTAT FUNCTIONS
HOW TO CONNECT A HEATER TO THE APP
TECHNICAL INFORMATION
- By power outage
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEHA LGB Bluetooth Heater App

USE OF THE APP

Programming the heater with BEHA Bluetooth App control: The App is available for Android and iPhone Smartphones and Tablets and can only be used locally, not for remote control. The purpose of programming and controlling the set temperatures of a heater is to save energy costs, e.g. by lowering the room temperature during nighttime. When using the app, you have two possibilities:

TEMPERATURE
The setting of wanted room temperature.

PROGRAMME
Creating a weekly program by setting different room temperatures for each day of the week at different hours based on when the room is vacant or not.

Each single heater can also be controlled manually by setting the desired room temperature on the thermostat wheel. In that case, the heater will leave the pre-set program.
When saving a programme in the heater electronics the phone must be within reach of the heater.

DOWNLOAD THE “BEHA Bluetooth Heater” APP ON YOUR PHONE

For Android phones go to Google Play
For iPhone go to App Store

Search for BEHA Bluetooth Heater. Download the App.

DESCRIPTION OF THE THERMOSTAT FUNCTIONS

This button is used for connecting the heater to the app.
When a selected heater is within range the blue light comes on.
The white light is on when the temperature is controlled by the app.

HOW TO CONNECT A HEATER TO THE APP

Activate Bluetooth on your phone/tablet:

Android: Go to Settings > Connect > Bluetooth > On iPhone: Go to Settings

Bluetooth > On

Press the Connecting (1) button on the heater for 3 seconds until the blue light blinks one time, then release the button.
After a few seconds, the heater is added to the app. Press “Beha heater” and you will enter the programming part of the app.

You have two choices:

TEMPERATURE
PROGRAMME

Press “Heater name” to change the name to e.g. “Oﬃce 800W”. Press “SAVE CHANGES”.

TEMPERATURE
Same temperature 24 hrs.: Press “SAVE CHANGES” when the wanted temperature is selected. The black triangle above the temperature scale will show the measured temperature in the room.

PROGRAMME
Select the wanted temperature for the speciﬁc hours throughout the 24 hours for each day of the week. Press SAVE CHANGES. The programme starts at 00:00, this cannot be changed. The opening page shows heaters that are connected to the app. Heaters within the range of the phone/tablet will be shown in black, and heaters outside of the Bluetooth range will be shown in grey.

DELETE HEATER FROM THE APP
Press on the name of the heater and slide to the left. Tap on CONFIRM.

If a heater is linked to a program and you want to use a diﬀerent temperature setting for some time, tap on TEMPERATURE. Then set the wanted temperature and tap on STORE CHANGES.
Heaters can be deleted when you are in PROGRAMME or TEMPERATURE. Tap on DUSTBIN then select the wanted temperature manually with the thermostat wheel on the heater.

TECHNICAL INFORMATION

If you hold the button for 10 sec. the heater will go back to the factory setting, i.e. the stored program will be deleted and the heater will start calibrating for a new temperature process. The setting of the thermostat wheel will prevail.
Tap on the Connecting (1) button and the white light will be on for 10 seconds. if it initially was dimmed down. This is useful if the room is bright.
When connecting the heater keep your ﬁnger on the button for 3 sec. until the blue light blinks.
When a heater is selected in the app and the phone is within the range of the heater the blue light on the heater will switch on. TEMPERATURE or PROGRAMME can be changed.
The blue light will blink three times when re-setting the heater.
The white light on the heater is on when the heater is controlled from the app.
When the heater is controlled from the app any command from the app will make the white light on the heater be on for 10 sec. Then the light intensity will be reduced.
The white light will blink three times when re-setting the heater.

THE HEATER CAN BE USED MANUALLY AND WITHOUT APP PROGRAMMING

The selected program in the app will be sent to the heater when pressing STORE CHANGES. The program will be stored in the heater electronics.
When changing phone heaters must be linked up again.
When connecting a heater to the app the phone must be within reach of the heater.
Re-setting of the heater to factory setting, only when the heater is transferred to a new owner.
The thermostat can be set at a minimum of 5°C.
The red light in the thermostat wheel is on when the heater is heating.
The App will be automatically updated provided the phone is set to automatic updating and the phone is connected to a router.
If the phone is outside of the range of the heater, the heater cannot be controlled from the app but it will follow the app program.
In the opening page of the app, the Bluetooth signal strength is indicated for each connected heater.
Heaters within the Bluetooth range are shown in black letters, the ones outside in grey.
Heaters can be connected to multiple users.
BEHA Heaters with steel front have protection class IP24 and can be installed in bathrooms and laundry rooms in accordance with local norms.

By power outage

Without app
The heater returns to the set temperature.

With the app: The heater will use the temperature set at the thermostat dial. To get back to the correct temperature/time setting, open each heater in the app and press SAVE CHANGES. The heaters will receive the correct time from the app.

Cold draft/Open window function:
When opening a window and the temperature drops more than 5°C within 40 sec the cold draft function is activated. The heater changes between set temperature for 10 seconds, and 5°C for 30 seconds. The function is active for max. 15 minutes.