ITC 85606-SS 7 Inch Stainless Steel Assist Handle Installation Guide
- June 3, 2024
- ITC
Table of Contents
ITC 85606-SS 7 Inch Stainless Steel Assist Handle
PARTS NEEDED
PARTS NEEDED:
| | ****
Assist Handle
| 5/16-18 SS Mounting Screws
(not provided)
| ****
Power Drill
Determine installation location. Make sure there is structural support behind the handle. Failure to install into adequate support will void the warranty and run the risk of pulling the handle out of the wall.
INSTALLATION
- Mark screw holes, then drill pilot holes.
- Place handle over holes and install using 5/16-18 stainless steel screws (not provided).
WARRANTY INFORMATION
For warranty information please visit www.itc-us.com/warranty-return- policy.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>