Baseus Bowie H1i Noise-Cancellation Wireless Headphones Pairing Manual

June 26, 2024
Baseus

Baseus Bowie H1i Noise-Cancellation Wireless Headphones Pairing Manual

Baseus-Bowie-H1i-Noise-Cancellation-Wireless-Headphones-Pairing-
product

WARRANTY

Contact Us
care@baseus.com
https://www.baseus.com
+1 800 220 8056 (US)

Customer Service
1. 24-Month Warranty
2. Lifetime Tech Support

SUPPORT
For FAQs, detailed user manuals, and more information, please
visit https://www.baseus.com/pages/support-center

APP

Download the Baseus app to set EQ/low-latency mode and customize gestures.

POWERING ON/OFF
Long-press the multifunction button for 2 seconds to turn on, and 4 seconds to turn off.

Baseus-Bowie-H1i-Noise-Cancellation-Wireless-Headphones-Pairing-fig-
\(7\)

BLUETOOTH
After powering on, the red and white lights will flash quickly, indicating that you can enter Bluetooth pairing.

Baseus-Bowie-H1i-Noise-Cancellation-Wireless-Headphones-Pairing-fig-
\(9\)

WEARING
Adjust the headband length and earcup angle until you achieve the most comfortable state while wearing and the optimal noise reduction effects.

BASEUS SMART CONNECT
After successfully connecting Device A, turn off Bluetooth and then pair it with Device B. Once the pairing is successful, turn on Bluetooth on Device A again.

Baseus-Bowie-H1i-Noise-Cancellation-Wireless-Headphones-Pairing-fig-
\(13\)

CONTROLS

Baseus-Bowie-H1i-Noise-Cancellation-Wireless-Headphones-Pairing-fig-
\(14\)

X 1: Press
1.5s: Long press for 1.5 seconds

NOISE CANCELLATION
Toggle switch: orange indicates noise cancellation on, and black indicates noise cancellation off.

Baseus-Bowie-H1i-Noise-Cancellation-Wireless-Headphones-Pairing-fig-
\(17\)

CHARGING/POWER

Baseus-Bowie-H1i-Noise-Cancellation-Wireless-Headphones-Pairing-fig-
\(19\)

  • Steady red light: charging in progress
  • Steady white light: fully charged
  • Flashing red light every 10 seconds: battery level below 10%

WIRED MODE
While in the on state, insert the audio cable into the headphone jack and connect the other end to the corresponding device.

Baseus-Bowie-H1i-Noise-Cancellation-Wireless-Headphones-Pairing-fig-
\(21\)

FACTORY RESET

Baseus-Bowie-H1i-Noise-Cancellation-Wireless-Headphones-Pairing-fig-
\(23\)

  • Long-press the “+” and “-” keys simultaneously for 4 seconds.
  • The red light will flash three times to indicate that the
  • The headphones have been reset.

SPECIFICATIONS

  • Name: Baseus Wireless Headphones
  • Model No.: Baseus Bowie Hli
  • Rated input: 5V=600 mA
  • Fully charging time: About 2 hours
  • Frequency response range: 20 Hz to 20 KHz
  • Charge interface: Type-C
  • Maximum output power: 3.92dBm for EU
  • Frequency band: 2.4G band (2.402GHz-2.480GHz)

High or low extreme temperatures that a battery can be subjected to during use, storage or transportation:

  • During use: maximum 45°C(113°F)
  • Storage: -20°C- 45°C(-4°F- 113°F)
  • Transportation:5°C-35°C(41°F-95°F)
  • Playtime:100 hours (varies by volume level content)

FCC ID:2A482-H1l
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Shenzhen Baseus Technology Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. Replacement of a battery with an incorrect type can defeat its safeguard (e.g., for certain lithium battery types). Disposing of a battery in a fire or a hot oven or physically crushing or cutting it can lead to explosions.

Leaving a battery in an environment with extremely high temperatures can cause explosions or the leakage of flammable liquid or gas. Using a battery in an environment with extremely low air pressure may result in explosions or flammable liquid or gas leakage. There is a risk of fire or explosion if the battery is replaced with an incorrect type. Avoid using the battery in extremely high or low temperatures and low air pressure at high altitudes during use, storage, or transportation.

Statement of compliance

Shenzhen Baseus Technology Co., Ltd. declares that the product meets the relevant requirements of 2023 No. 1007 The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023 for manufacturers. The full text of the Statement of compliance is available at the following internet address: https://eu.baseus.com/pages/statement-of-compliance-for-psti-uk

Warning
Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other injuries.

Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Hotline: +1 800 220 8056 Website: https://www.baseus.com
Official After-sales E-mail Address: care@baseus.com
PB4203Z-P0A0
1100019313
Designed by Baseus
Made in China

Download PDF:Baseus Bowie H1i Noise-Cancellation Wireless Headphones Pairing Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals