FALCON RIDGE CA-MAVERICKX3-4-TC01 Can-Am Maverick X3 4 Door Soft Top Cap Instruction Manual
- June 3, 2024
- FALCON RIDGE
Table of Contents
FALCON RIDGE CA-MAVERICKX3-4-TC01 Can-Am Maverick X3 4 Door Soft Top Cap
Instructions for Installation and Care of Can-Am Maverick X3 (4Door) Soft
Top Cap
CA-MAVERICKX3-4-TC01
Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab Material is Flammable.
Be sure to read these instructions thoroughly before opening and installing the top cap. The installation is best done when the temperature is 70 degrees F. or warmer. The temperature affects the adhesive Velcro, if conditions prevent installing in warmer weather it helps to store the adhesive Velcro at room temperature prior to installation.
-
Carefully open the carton and remove the enclosure on a large flat surface that is clean and free of dirt.
-
Check the parts included in the carton with the parts list shown below:
Included Parts:
Soft Top Cap 1pc
2” Adhesive Backed Hook Velcro 4pcs x 3in Length
Webbing Straps with Velcro 4pcs
If any parts are damaged or missing please contact customer service at 606-845-7439.
Note: Loosening or even removing a previously installed windshield will make installation much easier. -
Begin by laying the top cap on to the roof of the unit. Make sure the end with the longer ears is oriented towards the front of the vehicle.
-
Place a piece of the adhesive backed Velcro around the roll cage on each of the 4 corners. This Velcro will be used to secure the nylon webbing strips that secure the top cap to the roll cage.
-
Attach one of the webbing strips around the previously installed adhesive Velcro strips. Be sure the webbing strip is oriented towards the top cap.
-
Loosely connect each of the webbing strips to the ladder lock buckle on each of the 4 corners. Do not tighten at this time. The following images show how the webbing should be fed through the ladder lock buckle.
-
Once all for corners are started, begin by tightening each corner slightly. Work your way around the vehicle tightening each corner but be sure to keep the edges of the top cap aligned with the roll cage. Keep working your way around the vehicle until the top cap is centered and secured tightly to the roll cage. When this is done the installation is completed. The following images show a completed top cap installation.
Return Policy
If for any reason you choose to return this product it must be returned within
30 days from date item is received. You MUST package the product exactly as it
was originally packaged from the factory to get a full refund for the product!
The vinyl windows should never be folded when packaging in the box or for storage purposes. Lay all the windows on top of each other with the canvas folded in between and the paper (if available) on both sides of the windows.
All returned products will be inspected upon arrival at the production facility and must be in unused, factory new condition to receive refund – a 25% restocking fee will apply.
If ordered from Falcon Ridge please call at 606-845-7439 to gain a return authorization number, use our preferred shipping carrier (UPS) to return the item (unless the item is defective, you are responsible for paying the shipping to return the item.) Any returns submitted to Falcon Ridge without a return authorization number will be charged a 20% restocking fee. If ordered from one of Falcon Ridge’s many distributors, you must first call them and see what their return policy is. Once your item reaches our production facility, our customer satisfaction team will inspect your item to ensure unused, factory new condition. NOTE: All windshields must be returned with the original protective film intact and not removed. Do NOT REMOVE if you have any intentions of returning the item. Refund/ replacement of a windshield will only be processed on items with original protective film or if the windshield is defective.
Items must be properly packaged in the original shipping carton to protect them during transit and ensure your returned item arrives back factory fresh, and in new resalable condition (any returned items that have been used, altered or damaged in any way will not be subject for a refund.) All contents including instruction manuals, accessories, hardware, Velcro, etc. must be included in your return shipment. Only items in OEM factory new condition will be approved. Once returned items are received, credit will be issued to the original credit card/ payment method used for the purchase. Outbound shipping and return shipping cost will not be refunded. Please allow 4 to 6 weeks for your refund to be processed.
Warranty
To The Owner of this Product:
Thank you for purchasing one of our Falcon Ridge Cab Enclosures, Tops &/or
Windshields! Below are the terms under which your product is covered under our
manufacturer’s warranty.
30 Day Warranty which includes and is not limited to replacing the enclosure, tops and/or windshield due to defect of the product. Please refer to the return policy in this case for more information.
1 Year Warranty includes any defect in material or workmanship within this time frame we will gladly correct the problem or replace the enclosure, tops &/or windshield. Upon submitting for the correction or replacement we will need to receive pictures of the defect in material or workmanship along with the receipt from the date of purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>