SUZHOU XG-HMI7 Xnergy Smart Display Module User Manual

SUZHOU XG-HMI7 Xnergy Smart Display Module

Specifications

• Unit Type: XG-HMI 7 smart screen module
• Major Dispositions: CPU, Internal Storage, Memory, Display Screen, Joggle, Source, Other System

Product Usage Instructions

Overview
The XG-HMI 7 smart screen module is an industrial IPC with a Linux system microhost. It features the RK3566 series processor, 1GB DDR4 + 8GB eMMC, can run Python 3, and is compatible with various operation software.

Main Configuration Specifications

• CPU: RK3566 Quad-core ARM Cortex-A55 max 1.8GHz
• Internal Storage: 1GB DDR4
• Memory: 8GB eMMC
• Display Screen: 7 Inch 16:9 1024 * 600 IPS Panel, optional capacitive touch version
• Operating System: Linux Debian 11
• I/O Interfaces: RJ45, Wi-Fi, miniPCIe Slots, USB 3.0, USB 2.0, TF card slot, RS485, GPIO, buzzer, DC power supply interface, MICRO-SIM input voltage joggle
• Power Dissipation: Six watts, 0.50 Amps
• Working Temperature: -10°C to +60°C
• Humidity: 80%
• Machine Size: 197mm X 131mm X 30.5mm
• Weight: 450g

Smart Screen Module Layout Diagram
(The product appearance diagram is for functional description only; actual physical objects may vary based on production requirements.)

I/O Interface Description

FAQ

1. Q: What is the input voltage range for the device?
   A: The device supports input voltage from 12V to 30V.

2. Q: What operating system does the smart screen module run?
   A: The smart screen module runs on Linux Debian 11.

3. Q: What is the weight of the module?
   A: The weight of the module is 450g.

Overview

XG-HMI 7 smart screen module is an industrial IPC, Linux system microhost, RK3566 series processor, 1GB DDR4 + 8GB eMMC, can run Python 3, and can match various operation software.

The sample diagram is as follows:

Main application

• Human-machine interface (HMI)
• process control
• Process monitoring
• LOT panel point
• environmental monitoring
• Automotive application (charging pile)
• Automated selling equipment
• automation equipment

The installation method can be selected, and the design can be customized according to the actual requirements.

Main configuration specifications

version
system| Linux Debian 11
joggle| RJ 45| 10 / 100M quantity 100
WI-F I| 2.4G / 5G, 802.11 a / b / g / n number 1
mi niPCIe Slots| 1 number of 4G / LTE modules (Default cat 1)
USB 3.0| Number of the 1
USB 2.0| Number of 1, and support for OTG
The TF card slot| Compatible SD 3.0, MMC ver 4.51
RS 485| Support for automatic orientation, the number of 2
GPIO| Output 5 and input 3
buzzer| Number of buzzer: 1
The DC power supply interface| The DC-005 power supply input interface
MICRO -SIM| One
source| input voltage| Support the input voltage from 12 V to 30 V
joggle| DC-005 connector, support 2.1mm power interface
power dissipation| Six watts
Current (12V)| .50 Amps
other| working temperature| From-10℃ to + 60℃
humidity| ≤80%
Machine size| 197mm X 131mm X 30.5mm
weight| 450g

For all Class A Digital Devices, a statement like the following is needed:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

For all Class B Digital Devices, a statement like the following is needed:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment”.

“This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. ”

The device has been evaluated to meet general RF exposure requirement

Smart screen module layout diagram

(The above product appearance diagram only makes functional description and remarks, and the specific physical objects shall be subject to the production requirements)

I / O interface description

Order 1, power input DC-005 power interface

electrode, ground

Suitable plug specifications: outer diameter 5.5mm, inner diameter 2.1mm installation depth 9mm

Order 2, the power supply connector

Foot serial numbe

r

| definition| description| graph
---|---|---|---
1| +| Direct current power supply input positive electrode|
2| –| The DC power supply input is the negative electrode
3| Ground| by the numbers
Systems is connected inside the device to the DC Power Input Negative

Order 3, the RS485 interface x 2

Foot serial number

r

| definition| description| graph
---|---|---|---
1| A| RS 4851 + (A) signal|
2| B| RS 4851 + (B) signal
3~6| N C| throw out of gear
7~8| GND| landing
RS 485, Connect to the SOC serial port of 4
1| A| The RS 485-2 + (A) signal
2| B| The RS 485-2 + (B) signal
3~6| G| throw out of gear
7~8| N C| landing
RS 485, Connect to the SOC serial port of 7

4, the WIFI antenna interface

Order 5, the universal input and output interface

interface: + 5V ~ + 24V
10| IN -GND| Isolation ground # 1 for the general input interface
11| IN 1| Isolate the input for 1=> SOC GPIO 3 D 0=> gpiochip 3=> line 24
12| IN 2| Isolate the input for 2=> SOC GPIO 3 D 1=> gpiochip 3=> line 25
13| IN 3| Isolate the input for 3=> SOC GPIO 3 D 2=> gpiochip 3=> line 26
14| IN-COM| Isolation ground # 2 for the general input interface

6, SD, card socket

7, and the PCI-E Mini Card interface

4G _PWR _EN : Soc GPIO3 D5 =>gpiochip3 => line29
Function: Low on; high disabled
Internal interface of the device, all supporting modules, need to be tested and add corresponding drivers to the system mirror

Order 8, Micro SIM, card socket

Order 9,4G, state light

10, restore button

Interface

definition

| description| graph
---|---|---
Restore the button| Used to trigger the device to enter the boot loader mode to burn the firmware, use instructions: press and hold the change button, and then supply power to the device, the device will automatically enter the boot loader mode.|
This button needs to be used with the corresponding burning tool software to complete the firmware update

Declaration

Hereby, [SUZHOU XI NENG POWER CO. LTD. ]declares that the radio equipment type [Xnergy Smart Display Module]is in compliance with Directive 2014/53/EU.

FCC STATEMENT:
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Part 15 Clause 15.21 :
“Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment”. “This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.”

RF Exposure Guidance Statement：

1. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment.
   This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

2. The device has been evaluated to meet general RF exposure requirement

11, reset the button

Note The restart behavior triggered by using this button does not save the data currently running, and there may be data loss

12,4G antenna interface

The XG-HMI 7 Smart Screen module industrial host is equipped with an IPEX connector and extension cord connected to the 4G module and a 4G antenna. The customer also needs a Micro SIM card to ensure that the 4G module is working properly on the XG-H MI 7 smart screen module

Order 13, the buzzer

14, a wired network interface

RJ 45 Interface| Wired network interface
Support for 10,100M cable network|
---|---|---

15, USB 2.0 interface

Host, regular state This interface is used as a Host and supports external USB Devcie. Device, In boot loader mode, the interface USB works in Device mode, which can connect to other USB Host. Allowable maximum current: 500 mA|
The USB Device mode of this equipment is only used for debugging and updating the firmware and needs to be used with the development tools

16, USB 3.0 interface

17, and the HDMI interface

This interface is an internal interface and is only used in product debugging and mass production testing

Installation instructions

Use 6304 material head M3 * 8mm size screw matching gasket and spring blade for installation. Embedded installation method of the intelligent module, as shown in the figure below.

Note: Standard: M3 8:3.5+/-0.2Kg/cm M2 6:2.5+/-0.2Kg/cm

Storage and use instructions

In order to ensure the normal use of this product and prevent accidents such as electric shock or fire, please read and understand all the use requirements and operating procedures before using this product.

Strictly comply with the following requirements:

1. The DC power supply required by this product is generated by the AC / DC power adapter, and the AC / DC power adapter should be kept away from the heat source in a well-ventilated place.
2. AC power socket and AC power cord should pay attention to good grounding, and can withstand enough current demand.
3. This product uses 12V-30V DC power supply, the plug inner diameter of 2.1mm / 5.5mm, the plug length is greater than 9mm, the current is related to the external setting, the whole machine should not be greater than 3A.
4. Pay attention to good ventilation and heat dissipation, not placed in a closed shell without heat conduction or box; also do not let direct sunlight or other heat sources bake.
5. Pay attention to avoid over wet and excessive dust to avoid failure caused by circuit corrosion.
6. Pay attention to keep a certain space during the assembly to provide the air convection and heat dissipation on the surface of the equipment.
7. Take attention to prevent seesaw deformation due to additional pressure.
8. Pay attention to the power supply during assembly, each interface signal is correctly connected correctly, the power supply does not exceed the endurance range, the electrical connection of all parts is correct, check the power.
9. All input and output interfaces should be operated in the case of power failure (unplug the connector).
10. This product is suitable for indoor industrial use, using the ambient temperature: -10 ~ 60℃, relative humidity: 80%.
11. Please unplug the power supply when you are not in use for a long time.

Copyright © Xnergy Autonomous Power Technologies Pte Ltd.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>