BRAYER BR5000 Window Cleaning Robot Instruction Manual

BRAYER BR5000 Window Cleaning Robot

Specifications:

• Model: BR5000
• Usage: Window cleaning robot
• Power Source: Electric motor with backup battery
• Cleaning Method: Vacuum suction with rotating cleaning disks
• Operating Time: Up to 30-40 minutes on backup battery
• Additional Features: Artificial intelligence for path calculation, automatic edge detection, water supply for wet cleaning, remote control

Product Usage Instructions

Safety Measures and Operation Recommendations:

• Read the operation instructions carefully before using the window cleaning robot and keep it for future reference.
• Do not allow children to play with polyethylene bags or packaging film to prevent danger of suffocation.
• The device is intended for household use only; do not use it for commercial or laboratory purposes.

Before the First Use :
After transportation or storage at negative temperatures, unpack the device and wait for at least 3 hours before using it.

• Backup Battery Charging :
  Ensure the backup battery is charged fully before use to provide up to 30-40 minutes of operation in case of power outage.

• Installing the Cleaning Cloths:

• Attach the cleaning cloths to the rotating driving disks of the robot before operation.

• Filling the Water Tank:

• Fill the water tank of the robot for wet cleaning of surfaces; ensure water is added as needed during operation.

• Safety Rope:
  Securely attach the safety rope provided with the robot to improve safety during use.

• Switching the Robot On:
  Connect the power adapter to the mains and switch on the robot.
  Use the remote control for manual control if needed.

• Finishing the Operation:
  After each use, clean the cloths thoroughly and avoid turning them inside out during operation to prevent debris from damaging the vacuum pump.

FAQ:

• Q: How often should I wash the cleaning cloths?
  A: It is recommended to wash the cleaning cloths after every use of the robot to maintain optimal cleaning performance.

• Q: Can I use the robot on irregular surfaces?
  A: The robot is designed for framed window glass, mirrors, and smooth floorings; avoid using it on irregular surfaces for safety reasons.

Instruction manual

WINDOW CLEANING ROBOT
BR5000
The window cleaning robot can be used to clean framed window glass, mirrors, as well as even and smooth floorings.

DESCRIPTION

1. Handle
2. On/off button
3. Robot normal operation indicators (blue)
4. Malfunction indicators (red)
5. Backup battery charging indicator
6. Safety rope
7. Safety hook
8. Robot power socket
9. Water tank lid
10. Water spraying nozzles
11. Cleaning cloth
12. Robot normal operation indicators (blue)
13. Malfunction indicators (red)
14. Remote control signal receiver
15. Driving disk
16. Cleaning ring
17. Remote control
18. Auto clean up and then down
19. Auto clean right and then down
20. Manual upward movement
21. Start/pause button
22. Manual right movement
23. Manual water spray on/off button
24. Battery compartment lid
25. Auto water spray on/off button
26. Manual downward movement
27. Manual left movement
28. Auto clean left and then down
29. Power adapter
30. Power adapter cord
31. Robot power cord
32. Robot power plug
33. Robot power cord extension
34. Water adding bottle

SAFETY MEASURES AND OPERATION RECOMMENDATIONS

Read the operation instructions carefully before using the window cleaning robot and keep it for future reference.

• Use the device for its intended purpose only, as specified in this manual.

• Mishandling the robot can lead to its breakage and cause harm to the user or damage to their property and it is not covered by warranty.

• When using the robot, always follow the safety precautions, use the device only in easily accessible places. The user bears full responsibility for any possible consequences when working with the robot.

• To prevent the robot from falling and accidentally injuring people or damaging any objects, make sure that the safety rope is securely fastened before starting work.

• Use the device at ambient temperature 0-40°C.

• You can use the robot for cleaning framed windows, mirrors or smooth and flat floorings.

• Always install the cleaning cloths.

• Do not use the robot to clean window glass with cracks, and do not use the robot on uneven surfaces.

• Do not use the robot on wet window surfaces.

• Do not use the device in rainy weather or during thunderstorms.

• Use only the power adapter, parts and accessories  supplied with the device.

• Make sure that the operating voltage of the power adapter (as indicated on the label) corresponds to the mains voltage.

• Do not use the power adapter in areas with high temperature or humidity, and do not cover the power adapter during the robot operation or the backup battery charging.

• Do not touch the power adapter power cord or the power adapter body during the robot operation or the backup battery charging.

• Do not leave the operating device unattended.

• Do not use the device in places with strong magnetic fields.

• Protect the device from impacts, falling, vibrations and other mechanical stress.

• Do not use the device near heating appliances, heat sources or open flame.

• Do not use the robot in places where aerosols are used or sprayed, and in proximity to inflammable liquids; do not use the robot in place of storage of such liquids.

• Do not use the device near swimming pools or other containers filled with water.

• If the device is dropped into water, unplug the power adapter immediately, and only then you can take the device out of water. Contact our service center should you need to have the device examined  or repaired.

• Do not let the power adapter cord touch hot surfaces and sharp edges of furniture.

• Unplug the power adapter after using the robot or charging the backup battery. When unplugging the power adapter, hold the power plug and carefully remove it from the mains socket, do not pull the power cord, as this can lead to its damage and cause a short circuit.
  For child safety reasons do not leave polyethylene  bags used as packaging unattended. Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

• The device is not intended for usage by children.Do not leave children unattended to prevent using the device as a toy.
  Do not allow children to touch the body of the power adapter, the power cord and the power adapter plug during the operation of the device or the backup battery charging.

• Close supervision is necessary when children or disabled persons are near the operating device.

• During the device’s operation and breaks between operation cycles, place the device out of reach of children.

• The device is not intended for usage by physically, sensory or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the device.

• Periodically check the insulation condition of the power cord of the power adapter and the robot’s connecting cord.

• If the power cord of the power adapter is damaged, purchase a suitable power cord and replace it.
  Do not repair the robot or the power adapter by yourself. Do not disassemble the device by yourself; in case of any malfunction or if the device is dropped, unplug it and apply to the service center.

• To avoid damages, transport the device in original package only.

• Keep the device in a dry cool place out of reach of children and disabled persons.

THE DEVICE IS INTENDED FOR HOUSEHOLD USE ONLY, DO NOT USE THE DEVICE FOR COMMERCIAL OR LABORATORY PURPOSES.
DESCRIPTION OF THE WINDOW CLEANING ROBOT

• A window cleaning robot (hereinafter referred to as the robot) is a device for cleaning framed window glass, mirrors and smooth floorings.

• The robot is equipped with a vacuum electric motor, due to which a vacuum of air is created, and the robot is held on a glass or other smooth  surface.

• The built-in backup battery is used in case of an emergency power outage or accidental switching off of the power adapter; in this case, the robot will not fall and will continue to operate on the backup battery.

• ATTENTION! The robot’s operating time when powered by a backup battery is limited; with a fully charged battery, the operating time is no more than 30-40 minutes.

• The safety rope also improves safety when using the robot.
  Cleaning of the working surface is carried out by two rotating driving disks (15), where the cleaning rings (16) with cloths (11) are attached.

• You can wash the cleaning cloths (11) before using them again.

• The robot has artificial intelligence, it calculates the path of movement, automatically detects the edge of the window, and automatically supplies water for wet cleaning of the surface.

• If you need to manually control the robot, use the remote control (17).

BEFORE THE FIRST USE

• After the device’s transportation or storage at negative temperature, unpack it and wait for at least 3 hours before using it.
• Unpack the device and remove all the packaging materials.
• Keep the original package.
• Read the safety measures and operating recommendations.
• Check the delivery set.
• Examine the device for damages; do not plug a damaged device into the mains.
• Make sure the indicated power adapter voltage specifications correspond to the specifications of your mains. When the power adapter is used in the mains with 60 Hz frequency, it does not need any additional settings.

BACKUP BATTERY CHARGING

• Insert the plug (31) of the robot power cord (30) into the socket (8) and thread it rotating clockwise (fig. 1).
• Insert the power cord (29) into the power adapter socket (29).
• Insert the power cord plug (29) into the mains socket (fig. 2).
• When the indicator (5) turns green to indicate that the backup battery is fully charged, unplug the power cord (29) from the mains socket.

INSTALLING THE CLEANING CLOTHS

• Put the cloths (11) on the cleaning rings (16), install the cleaning rings (16) on the driving discs (15) (fig. 3).
• Make sure that the cleaning rings (16) are installed correctly and without distortion, this will prevent air leaks and ensure reliable operation of the vacuum pump.

FILLING THE WATER TANK

• Fill the bottle (33) with water.
• Turn the robot over and remove the upper cleaning ring (16).
• Open the water tank lid (9).
• Use the bottle (33) to fill the water tank, close the lid (9) (fig. 4).
• Install the cleaning ring (16) to its place.
  Note : the water tank capacity is 50 ml, 80% filling of the water tank is sufficient for normal operation of the robot.

SAFETY ROPE

• Before starting to work with the robot, always check the condition of the safety rope (6), the reliability of the connection of the safety rope (6) at the place of its permanent connection in the power socket (8) (fig. 5) and whether the knots on the safety hook (7) are tightly tied.
• Before using the robot, securely attach the safety rope (6) to any stationary object indoors using the safety hook (7) (fig. 6).
• When operating the robot on external windows without a balcony, fence off the dangerous area under the windows to avoid danger.

SWITCHING THE ROBOT ON

• Insert the plug (31) of the robot power cord (30) into the socket (8) and thread it rotating clockwise (fig. 1).
•  Insert the power cord (29) into the power adapter socket (29).
• Connect the power cord (29) plug to the mains socket (fig. 2).
• Note: if the power cord (30) is not long enough, use an extension cord (32), connect it between the socket (8) and the plug (31) (fig. 2a).
• When using the robot, the power adapter must always be connected to the mains.
• During the robot operation make sure that the safety rope (6), the power cord (30) or the extension cord (32) moves freely.
• Hold the robot by the handle (1) and place it on the window glass at a distance of at least 8-10 centimeters from the window frame (fig. 7).
• Press and hold the on/off button (2) for 2 seconds and the vacuum pump will turn on.
• Check if the robot can be held securely on the glass.
• Release the robot to clean the glass in the automatic mode.
• Note: If necessary, you can select the automatic or manual cleaning mode by yourself using the remote control (17).

FINISHING THE OPERATION

• Hold the handle (1), press and hold the on/off button  (2) for 2 seconds, the vacuum pump will switch off, remove the robot from the glass.
• Detach the safety rope (6) from where it is secured, and unplug the power cord of the power adapter (29) from the mains socket (fig. 8).
• Remove the cleaning rings (16) and remove the clothes (11) from them.
• After each use of the robot, it is recommended to wash the cleaning cloths (11) in warm water using a neutral detergent, rinse them thoroughly and dry.

Notes:

• keep the cleaning cloths (11) clean and wash them after every use of the robot;
• It is prohibited to turn the cleaning cloths (11) inside out during the robot operation and continue to use them; the cloths (11) collect particles of dust and debris, and debris getting into the vacuum pump can lead to its failure.

DRY CLEANING OF WINDOWS

• Dry cleaning is used only for outside surface or for very dirty windows.
• Do not spray water on the window glass (fig. 9).
• Use clean and dry cleaning cloths (11) so the robot will wipe dry dust off the outside glass surface.
• After dry cleaning, it is recommended to wash the cloths (11) in warm water with neutral detergent, rinse thoroughly and dry.

WET CLEANING OF WINDOWS

• For wet window cleaning, fill the water tank (see the chapter FILLING THE WATER TANK).
• During the operation the water is sprayed on the cleaned surface from the nozzle (10) on the right or left side.
• If the robot moves to the left, then water is sprayed from the left nozzle (10), if the robot moves to the right, then water is sprayed from the right nozzle (10).
• If the robot moves downwards, the water is sprayed from the right side.

BACKUP BATTERY
The built-in backup battery is used in case of an emergency power outage or accidental switching off of the power adapter; in this case, the robot will not fall and will continue to operate on the backup battery.

ATTENTION! The robot’s operating time when powered by a backup battery is limited; with a fully charged battery, the operating time is no more than 30-40 minutes.

• If there is a power outage at the electrical outlet, the robot will remain in the cleaning area and you will hear a sound signal.
• The robot normal operation indicators (blue) (3, 12) and malfunction indicators (red) (4, 13) will flash alternately.
• Take immediate action to prevent the robot from falling off the surface being cleaned.
• Slowly pull the device towards you by the safety rope  (6). Pull the safety rope (6) at an angle parallel to the glass to prevent the robot from falling.
• Hold the handle (1), press and hold the on/off button (2) for 2 seconds, the vacuum pump will switch off, remove the robot from the glass.
• Check the mains socket, the contact in the sockets (8, 32), check the power cord (30) or the extension cord (32) for breaks.

REMOTE CONTROL
Note : You can control the robot with the remote control (17) both from the front side and from the bottom side of the device.

• Before using the remote control (RC) (17) open the battery compartment lid (24) and insert 2 “AAA” batteries (not supplied) into the battery compartment strictly following the polarity, close the battery compartment lid (24).
  If you are not going to use the remote control for a long time, open the lid (24) and remove the batteries from the remote control (17) battery compartment.

• Battery leakage may cause injury or damage to the remote control (17), to prevent damage to the remote control (17), follow the instructions below:

  • use only the «AAA» batteries;
  • do not use old and new batteries at the same time;
  • do not recharge the batteries;
  • strictly observe the polarity while installing the batteries;
  • apply to specialized centers for recycling of the batteries.

• When using the remote control (17), point it at the front or bottom of the robot.

• The distance between the remote control and the fan should be within several meters, the coverage angle should be up to 30 degrees.

• Avoid exposing the receiver to direct sunlight, otherwise false activation of control commands is possible.

USING THE REMOTE CONTROL

• Start/pause button
  To switch the cleaning mode on, press the start/pause button (21) on the remote control (17), to temporarily stop the cleaning mode, press the start/pause button (21) again.

Manual cleaning direction modes

• To switch on the robot’s upward movement, press the button (20)  on the remote control (17).
• To switch on the robot’s downward movement, press the button (25)   on the remote control (17).
• To switch on the robot’s movement to the right, press the button (22)  on the remote control (17).
• To switch on the robot’s movement to the left, press the button (26)  on the remote control (17).

Automatic water spray mode (fig. 10)

• When the robot is in the Z-shaped cleaning mode, press the auto water spray on/off button (24) on the remote control (17), you will hear 2 sound signals, and the automatic water spray mode will switch on.
• The automatic water spray mode is activated at certain  intervals.
• To switch the automatic water spraying off, press the automatic water spray on/off button (24) on the remote control (17), you will hear a sound signal and the automatic water spraying mode will switch off.

Manual water spraying mode

• When the robot is in the Z-shaped cleaning mode, press the manual water spray on/off button (23) » on the remote control (17), you will hear two sound signals and the manual water spraying mode will switch on.
• To switch the manual water spraying off, press the manual water spray on/off button (23) on the remote control (17), you will hear a sound signal and the manual water spraying mode will switch off.

SMART PATH PLANNING MODES

• Auto clean up and then down (fig. 11)
• To switch on the auto clean up and then down, press the button (18) on the remote control (17).
• Auto clean right and then down (fig. 12)
• To switch on the auto clean right and then down, press the button (19) on the remote control (17).
• Auto clean left and then down (fig. 13)
• To switch on the auto clean right and then down, press the button (27) on the remote control (17).

POSSIBLE TROUBLES AND TROUBLESHOOTING

• First use of the cleaning cloths (11)
• When using the cleaning cloths (11) for the first time, especially on very dirty windows, the robot may have difficulties moving.
•  Evenly spray a small amount of water on the cleaning cloths (11).
• Make sure that the cleaning cloths (11) are only slightly damp.

Self-diagnosis

• If the robot cannot move smoothly across a cleaning surface, you will hear sound signals warning that there is too much friction or that the surface is slippery.

• If the glass is clean, it will be slippery. In rooms with air conditioning running, the humidity is usually very low, so the glass will also be slippery.

• Always make sure that the cloths (11) are clean before operation.

• Make sure that there are no film or stickers on the glass, because they also reduce the friction.

• When you attach the robot, place it at least 8-10 cm from the window frame.
  The robot slips and cannot detect the upper window frame in auto clean up and then down mode.

• In this case, it is recommended to switch on the auto clean the right and then down mode by pressing the button (19) on the remote control (17) or the auto clean left and then down mode by pressing the button (27) on the remote control (17).

• The robot did not finish cleaning the window and stopped in the middle of the window

• To resume cleaning, press the button (19) « » or (27) « » on the remote control (17).

• The robot does not move smoothly or moves jerkily.

• The cleaning cloths (11) are very dirty, replace the cloths (11) and continue operation.

• Check the fastening of the driving disks (15), the disk (15) fastening screw may have become loose. Tighten the fastening screw by turning it clockwise.

• There are round spots left on the window after cleaning.

• The cleaning cloths (11) are very dirty. Replace the cloths (11) with clean ones and repeat cleaning where the stains remain.

• The robot stops at a height out of range, the power is turned off, the red indicators (4, 13) and blue indicators (3, 12) flash alternately and you hear a sound signal

• Slowly pull the device towards you by the safety rope (6). Pull the safety rope (6) at an angle parallel to the glass to prevent the robot from falling.

• Hold the handle (1), press and hold the on/off button (2) for 2 seconds, the vacuum pump will switch off, remove the robot from the glass.

• Check the mains socket, the contact in the sockets (8, 32), check the power cord (30) or the extension cord (32) for breaks.

• The robot stops when encountering unknown obstacles, the red indicator (4, 13) flashes, there is no sound signal

• Return the robot to a safe location with the remote control (17) by pressing the corresponding direction button.

• Slowly pull the device towards you by the safety rope (6). Pull the safety rope (6) at an angle parallel to the glass to prevent the robot from falling.

• Remove the obstacles on the window.

• Check the correct installation of the cleaning rings (16) for possible air leaks.

• The robot cleaned the window but did not stop automatically

• Stop the robot by pressing the start/pause button (21) « » on the remote control (17).

• The robot doesn’t spray water

• Check the water in the water tank and add more, if necessary.

• Check the water spraying nozzles (10) and clean them, if necessary.

• Make sure that the automatic or manual water spray mode is switched on.

CLEANING AND CARE

• Clean the robot after every use.
• Before cleaning the robot remove the power cord plug (29) from the mains socket.
• Remove the plug (31) from the socket (8) (fig. 1).
• Turn the robot over, remove the cleaning rings (16) and the cleaning cloths (11).
• Machine or hand washing of the cloths (11) at 30-40°C is recommended.
• Do not tumble dry and do not dry the clothes (11) at the temperature exceeding 50°C.
• Do not iron the clothes (11) and do not use chemicals for cleaning them.
• Clean the robot body with a soft, slightly damp cloth, and then wipe it dry. Provide that no liquid gets inside the robot body.
• Do not use abrasive cleaners or solvents to clean the robot body or the accessories.
• Do not immerse the robot body, the power adapter (29), the power cord (29), the robot power cord (30) or the extension cord (32) in water or any other liquids.

STORAGE

• Before taking the robot away for long storage, clean the robot body (11) and the cleaning cloths (11).
• Store the robot in a cool dry place, unreachable by children or people with disabilities.

DELIVERY SET

1. Window cleaning robot – 1 pc.
2. Cleaning rings – 2 pcs.
3. Cleaning cloths – 8 pcs.
4. Safety rope – 1 pc.
5. Remote control – 1 pc.
6. Power adapter – 1 pc.
7. Power adapter cord – 1 pc.
8. Robot power cord extension – 1 pc.
9. Water adding bottle – 1 pc.
10. Instruction manual — 1 pc.

TECHNICAL SPECIFICATIONS

Robot

• Power supply: 24 V
• Rated input power: 72 W
• Suction power: 2800 Pa
• Backup battery capacity: 650 mA
• Water tank capacity: 50 ml
• Power adapter
  • Power supply: 220-240 V ~ 50-60 Hz 1.5 A
  • Nominal output voltage: 24 V 3.75 A
• Remote control
  Power supply: 3 V – 2 «AAA» batteries (not supplied)

RECYCLING

• To prevent possible damage to the environment or harm to the health of people by uncontrolled waste disposal, after expiration of the service life of the unit or the batteries (if included), do not discard them with usual household waste, take the  unit and the batteries to specialized stations for further recycling.
• The waste generated during the disposal of products is subject to mandatory collection and consequent disposal in the prescribed manner.
• For further information about recycling of this product apply to a local municipal administration, a household waste disposal service or to the shop where you purchased this product.
• The manufacturer reserves the right to change the design, structure and specifications not affecting general operation principles of the unit, without prior notice.
• The unit operating life is 3 years
  The manufacturing date is specified in the serial number.
  In case of any malfunctions, it is necessary to apply promptly to the authorized service center

Produced for «Ruste GmbH
e-mail: info@brayer.su
Made in China

References

• BRAYER - официальный сайт австрийского бренда бытовой техники

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>