Netac TW02G Wireless Earbuds User Manual
- July 4, 2024
- Netac
Table of Contents
Netac TW02G Wireless Earbuds User Manual
Power ON/OFF
Manual startup
Touch & hold both left and right earbud for 3S to Weapon
Auto startup
Open the case , then Earbuds will power on automatically
Touch area
Manual shutdown
Touch & hold either left or right earbud for 5S to Power off (When Left and
right earbuds are connect, Long press L/R earbud to turn off both of the ear
buds)
Auto shutdown
Put earbuds into charging case and close the case , it will power off
automatically
Bluetooth connectivity
After the headset is turned on, the indicator light on one side displays green light, and the indicator light on the other side displays headphones Off. At this time, you can search the pairing name in the Bluetooth list of the mobile phone: “Netac TW02G”, click the pairing name to connect.
CONNECTED
FIND THE DEVICE
Dongle Connection
(Dongle needs to be purchased separately)
Insert Dongle into your phone and automatically connect the earbuds.
Insert Type-C to USB adaptor +Dongle into the computer to automatically
connect the earbuds.
The Earbuds automatically enter game mode Some mobile phones require manual
active OTG function.
Plug-in Dongle automatic connection device
Music Control
TOUCH 1X (volume down)
TOUCH 2X
TOUCH 3X
TOUCH 1X (Volume increase)
TOUCH 2X
TOUCH 3X
Control Calling
TOUCH L/R 1X
TOUCH L/R 2X
Long press L/R 2s
TOUCH L/R 4X In/out (siri)
When the earbuds are not connected
TOUCH L/R 5X (Restore factory settings)
Charging Description
When the earbud battery is low with warning tone.
Please put it into the charge case to charge it in time.
Specifications
Model: TW02G
Charging Case: 300mAh
Charging Time: 1.5H
Speaker Unit: φ12mm
Input: DC5V 350mA
Earbud Battery: 35mAh
Play Time : 5.5H(Earbuds) +22H(Charging Case）
Product Weight： 43±5g
BT Distance: 10M
matters needing attention
- Please store and use this product in normal temperature environment;
- Do not expose this product to rain or humid environment for a long time;
- Do not throw it to avoid product damage caused by falling;
- Do not disassemble, repair or transform this product by yourself;
- Please use the power charger with rated voltage to charge;
- Unauthorised disassembly will invalidate the warranty.
- The batteries in the charging stand and earphone are non replaceable batteries
- Do not expose to such conditions as sunlight, fire or similar overheating
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Points DE collect sir www.quefairedemesdechets.fr
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Beijing Netac Innovation Technology Development Co.,Ltd.
Location:138-1-3 No.20, Tongan Road, Momentous District, Beijing, China Netac
Technology Co., Ltd.
Location: Netac Building, Number 6 High-tech South St, Anshan District,
Shenzhen, P.R.China 518057
Web:www.netac.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>