Suzhou Xinyijin Electronic Technology FL-1D20W-WB-RGBCW-US Smart Flood Light User Manual
- June 4, 2024
- Suzhou Xinyijin Electronic Technology
Table of Contents
Xinyijin Electronic Technology FL-1D20W-WB-RGBCW-US Smart Flood
Light
User Manual
SMART FLOOD LIGHT INSTALLATION
WARNING
- Make sure to cut off the power before installation.
- Please do not place this light in corrosive conditions.
- If there is any damage to the cord, please cut off the power and stop using the fixture immediately.
- To ensure the light works properly, please use the voltage indicated on the packaging.
PRODUCT SPECIFICATIONS
| MODEL | FL-1D2OW-WB-RGBCW-US |
|---|---|
| WATTAGE | 20W |
| INPUT VOLTAGE | 120VAC |
| FREQUENCY | 60Hz |
| ILLUMINATION | Max. 2000 Lumens, Dimmable |
| COLOR | RGB, Cool White, Warm White |
| COLOR INDEX | Ra>80 |
| BEAM ANGLE | 120° |
| WATERPROOF | IP65 |
| WORKING TEMPERATURE | -4°F to 104°F (-20°C to 40°C) |
| SMART CONTROL | WiFi & Bluetooth |
SURFACE MOUNTING
- Before installation, ensure that the wire and plug of the smart flood light are in good condition and without damage.
- Use two stainless steel M6 expansion bolts (not included) to mount the flood light bracket to the selected surface, as shown in Figure 1 & Figure 2.
- Adjust the direction of the flood light up or down as needed, then plug it into an outlet to power the fixture.
IMPORTANT INSTALLATION NOTICE
- When installing, make sure the distance between the flood light and any other objects is a minimum of 3 ft. to ensure effective heat dissipation.
- Though the smart flood light is waterproof for outdoor use and will function in the rain, it is not suitable to be used underwater.
SMART FLOOD LIGHT SETUP
-
Make sure to turn on Bluetooth on your mobile phone, and connect your mobile phone to WiFi Internet (2.4GHz).
-
Download the Smart Life app to your mobile phone and install the app. To download the Smart Life app, you may search the keyword “Smart Life” in the Apple Store or on Google Play, or scan the QR code below:
https://smartapp.tuya.com/smartlife -
Create an account on Smart Life and log in. Make sure to remember your account and password for Alexa or Google Assistant app pairing later.
-
Add the smart flood light to the Smart Life app.
a. Login and stay at the home page.
 b. Power
on the smart flood light using your power switch. The light will start
blinking after 5 seconds automatically, and the device will show up on the app
page. Tap the “Go to add” button and enter the WiFi password to complete the
pairing. If the light doesn’t blink, please repeatedly press on-off-on-off-on-
off-on on the smart floodlight to activate the blinking mode on the light,
making sure to maintain an interval of 1-2 seconds between each on and off.
c. Tap
“Next” to give a name to the smart flood light, and tap “Save”. A simple,
easy-to-remember name is recommended.
 d. The
named light will be shown on the homepage of the Smart Life app. Now you can
control the smart flood light with the Smart Life app, using multiple light
settings such as “On/Off”, “Adjust Brightness”, “Change Colors”, etc.
GROUP THE SMART FLOOD LIGHT
After all the smart flood lights have been paired to the Smart Life app, you may group the lights for easy control by following these steps:
- Choose any light on the Smart Life app, tap the “Edit” button in the top right corner, then tap “Create Group”.
- Choose the lights you want to group from the device list, tap “Save” and name the group, and tap “Save” again to complete the setup.
- The named group will be shown on the homepage of the Smart Life app. Now you can control the group with the Smart Life app, using multiple light settings such as: “On/Off”, “Adjust Brightness”, “Change Colors”, etc.
- Choose the lights you want to group from the device list, tap “Save” and name the group, and tap “Save” again to complete the setup.
TROUBLESHOOTING
If the smart flood light has disconnected from the Smart Life app, do the following:
- Check that the 2.4GHz WiFi signal is available.
- Make sure to turn on Bluetooth on your mobile phone and connect your mobile phone to WiFi.
- Check that the WiFi password is correct on the Smart Life app.
- Follow the SMART FLOOD LIGHT SETUP procedures above to pair the Smart Flood Light.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC ID : 2A5KG-FL1DRGBCW
Suzhou Xinyijin Electronic Technology Co., Ltd.
No.488 WangShan Road, Yushan Town, Kunshan City,Jiangsu Province, China