Suzhou Jernano Carbon JERNANO-F5113 Carbon Nanotube Heating Film User Manual
- June 5, 2024
- Suzhou Jernano Carbon
Table of Contents
Suzhou Jernano Carbon JERNANO-F5113 Carbon Nanotube Heating Film
Please take attention that changes or modification not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
iwarm 4.0 uses soft,thin material as the core heating material,which converts electricity quickly into heat energy through efficient electrothermal conversion.
Features
- Driving force:5V,high safety factor(<36V);
- Planar heating, even heating, fast heating,comfortable;
- The far-infrared wavelength emitted by iwarm 4.0 is very close to the human body;
- Realize intelligent and touch-tune control mode, meet the requirements of different people and different temperatures in different environments.
About products
Bluetooth function
Connect the USB connector to the 5V / 2A mobile power interface, long-perss the controller, let the Bluetooth light flashing, Controller enters Bluetooth connection status.
Using steps
Download and install app for mobile phone.
Connect APP,:open your phone Bluetooth, enter the software interface and long- perss the controller, let the Bluetooth light flashing, click on the “+” to add intelligent wearing, then you can work on the iwarm 4.0 independently
Controller
| Controller usage guide
---|---
Control lamp condition| Output level
Red light long bright| High level
Orange light long bright| Middle level
White light long bright| Low level
Red light flashing| Heating sheet reaches setting high level temperature
Orange light flashing| Heating sheet reaches setting middle level temperature
White light flashing| Heating sheet reaches setting low level temperature
Bluetooth light flashing| Open your phone bluetooth,the controller and your
phone must
in 2 meters,then connect APP
Purple/red light fast flashing| The master controller is wrong,please connect with manufacturer
Product description
- Heating clothes are prohibited from dry cleaning. They can be washed by machine or hand at room temperature. After washing, they need to be fully dried before they can be used again.
- Strictly forbidden to charge and discharge on the edge of mobile power supply.
- Please turn off or remove the mobile power when not use. Avoid heating when not dress, Forbid using sleep.
Product parameters
- Name: iwarm 4.0
- Two piece size: 150mm190mm2P
- Three piece size: 150mm220mm1P+150mm120mm2P
Using temperature:-20℃ to 60℃ Using relative humidity:≤85RH%
Disabled groups
- Infants and without self-care ability;
- Careful use of pregnant women
Product packing configuration
- 1 set Heating component;
- 1 copy instruction manual;
- 1 tag.
Warranty terms
- From the date of saling. Free warranty within one year(not-human damage);
- The following cases are not in the warranty scope: beyond the scope of attention, improper use, self-repair or man-made sabotage(including misoperation),and use the product for other purpose beyond the scope,etc.
- Within the scope of the law, our company reserves the right of modification and final interpretation of the warranty;
- The provisions of laws and regulations are clearly defined and enforced.
- Product name: Carbon Nanotube Heating Film
- Model No.: JD-F5113(iwarm4.0),JD-F5112(iwarm4.0)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>