nedis WLTK1010BK Walkie Talkies Set User Guide
- May 15, 2024
- nedis
Table of Contents
Walkie Talkie
including charging base
WLTK1010BK
WLTK1010BK Walkie Talkies Set
ned.is/wltk1010bk
Quick start guide
Specifications
Product | Walkie Talkie |
---|---|
Article number | WLTK1010BK |
Input | USB Type-C™ |
Output | 2.5 mm audio port |
Frequency channels | 8 |
Automatic channel scan | Yes |
Operating frequency | 446 MHz |
Maximum transmission power | ≤ 0.5 W |
CTSS Codes (for private talking) | 38 |
DCS Codes | 83 |
VOX | 3 levels |
Battery life | Up to 6 hours |
Standby time | Up to 48 hours |
Charging time | Up to 8 hours |
Automatic battery saving | Yes |
Battery type | 3.7 V 1300 mAh (2x) |
Maximum SAR values | 0.333 W/kg for FM 12.5 KHz |
Maximum range (open field/no obstacles) | Up to 10 km |
Maximum range (urban area/country side) | Up to 3 km |
Maximum range (normal use/downtown or residential area) | Up to 500 – 1000 m |
Walkie Talkie
WLTK1010BK
****For more information see the extended manual
online:ned.is/wltk1010bk
Intended use
This product is exclusively intended as a two-way communication system over
large distances of up to 10 km.
The product can be charged in the charging base or via the USB-C port on the
side of the product.
The WLTK1010BK is intended for indoor and outdoor use.
Any modification of the product may have consequences for safety, warranty and
proper functioning.
Main parts (image A)
1 Antenna | 11 Speaker |
---|---|
2 Lamp | 12 Charging slot |
3 Display | 13 USB-C port |
4 Microphone | 14 2.5 mm audio port |
5 PTT button | 15 Belt clip |
6 Lamp button | 16 Battery compartment |
7 Power button / Menu button | 17 Battery |
8 Scan button | 18 Battery cover |
9 Up button / Monitor button | 19 USB-C port |
10 Down button / Lock button | 20 USB-C cable (2x) |
Safety instructions
WARNING
- Only use the product as described in this manual.
- Read the manual carefully before use. Keep the manual for future reference.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- The product cannot be used to contact the emergency services.
- Do not expose the product to direct sunlight, naked flames or heat.
- Do not expose the product to water or moisture.
- Do not drop the product and avoid bumping.
- Do not open the product.
- Keep the product out of reach from children.
- Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
- Keep cells and batteries clean and dry.
- Do not remove a battery from its original packaging until required for use.
- Do not subject cells or batteries to mechanical shock.
- In the event of a battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- Seek medical advice immediately if a cell or a battery has been swallowed.
- Do not install the battery in reverse polarity.
- Observe the plus (+) and minus (–) marks on the cell, battery and equipment and ensure correct use.
- Do not short circuit.
- Do not use any battery which is not designed for use with the equipment.
- Battery usage by children should be supervised.
- Always purchase the battery recommended by the product manufacturer for the equipment.
- Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
- Use only the battery in the application for which it was intended as described in this manual.
- Non-rechargeable batteries are not to be recharged.
- Do not use the battery if any part is damaged or defective. Replace a damaged or defective battery immediately.
- Do not dismantle, open or shred batteries.
- When possible, remove the battery from the equipment when not in use.
- Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
- Do not repair the product. If damaged, it must be properly disposed of.
Using the product
Power button 7| Press and hold for 3 seconds to switch the product on or off.
A beep will sound.
---|---
Menu button 7| Press lx to select the channel.
Press 2x to select the CTCSS code.
Press 3x to select the DCS Sub-channels.
Press 4x to select the VOX settings.
Press 5x to select the call tone. (CA)
Press 6x to switch the key tone on or off. (TO) Press 7x to switch the roger
beep on or off. (RO)
Press 8x to select the Dual Channel Monitor. (DCM)
PTT button 5| Press to send a call tone. The tone will be transmitted over the
set channel.
Press and hold to talk.
Scan button 8| Press to scan for radio channels.
Up button 9| Press to increase the volume.
Monitor button 9| Press and hold for 3 seconds to activate the monitor.
Down button 10| Press to decrease the volume.
Lock button 10| Press and hold for 3 seconds to lock or unlock the product.
Display 3| Press A7 A 8 A9 or A10 to switch on the display light.
Lamp button A 6| Press and hold to switch on the lamp.
USB-C port 13| The product can be charged in the charging base or via the
USB-C port on the side of the product.
It is recommended to switch off your radio during charging.
1. Plug the USB-C cable A20 into the USB-C port A13.
2. Plug the other end of A20 into a computer or power adapter.
3. Plug the power adapter into a power outlet.
4. Place the walkie talkies in the charging slots A12.
5. The battery icon on the display flashes to indicate the product is being
charged.
2.5 mm audio port 14| Plug walkie talkie headphones (not included) into the
2.5 mm audio port.
If you use the PTT button of the headphones, also use the microphone of the
headphone.
Do not connect other headphones to prevent damage to the product.
– Extended exposure to high volumes from headphones can cause hearing loss.
Belt clip 15| Hold the latch and move the belt clip upwards, to remove the
belt clip.
Slide the belt clip in to fasten the belt clip.
Battery Compartment 16| If the battery is low, the battery icon will flash and
a beep will sound to indicate that the batteries must be recharged.
Remove the belt clip Ay from the product before opening the battery
compartment 15.
Remove the batteries, if you do not use the product for an extended period of
time.
Frequency channel
The product meets all required standards for radio equipment using PMR 446 frequencies as authorized. The use of this two-way radio product involves the public airways and its use may be subject to local laws or regulations. Contact your radio licensing authority for more information.
Europe (8CHS)
Frequency channel
1. 446.00625 | 5. 446.05625 |
---|---|
2. 446.01875 | 6. 446.06875 |
3. 446.03125 | 7. 446.08125 |
4. 446.04375 | 8. 446.09375 |
The complete Declaration of Conformity ( + safety datasheet if applicable )
can be found and downloaded via http://webshop.nedis.com
For other compliant-related information, please contact customer service desk
for support:
via website: http://www.nedis.com
via e-mail: service@nedis.com
NEDIS B.V., De Tweeling 28,
5215 MC ’s-Hertogenbosch, THE NETHERLANDS
References
- Walkie-Talkie Set | 2 Handsets | Up to 10 km | Frequency channels: 8 | PTT / VOX | up to 6 Hours | Charging base included | Headphone output | Black
- Nedis | Your wholesaler of consumer electronics
- Nedis | Your wholesaler of consumer electronics
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>