savio LB-01 RGB Light Bar User Manual
- October 30, 2023
- Savio
Table of Contents
savio LB-01 RGB Light Bar
Product Information
The Savio Light Bar RGB is a device that provides both white light for desk illumination and colored LED lighting effects for the area behind the monitor. It comes with a mounting bracket, mounting plate, USB cable, security sticker, and two touch panels located at both ends of the Lightbar. The left touch panel controls the white light illuminating the desk surface, while the right touch panel controls the colored LED strip.
Main Features:
- Provides white light for desk illumination
- Provides colored LED lighting effects for the area behind the monitor
- Comes with a mounting bracket, mounting plate, USB cable, security sticker, and two touch panels
- Five colors and seven static colors can be chosen from
- Eight dynamic effects such as gradient and rainbow effect can be chosen from
- Built-in memory to remember the previously selected effect
Package Contents
- SAVIO RGB Light bar
- Mounting bracket
- Mounting plate
- USB cable
- Security sticker
- Left touch panel
- Right touch panel
Safety Conditions:
The device should be used according to the instructions provided in the user
manual. The device should be kept away from water or any other liquids. Do not
disassemble or modify the device in any way. Use only the USB cable provided
with the device to connect it
to a computer or a wall charger. The device should be kept out of reach of
children.
Product Usage Instructions
-
Wipe the top and back of the monitor to remove dirt.
-
Remove the protective foil from the mounting plate and stick it on the top part of the monitor.
-
Pull the cable through the hole in the holder and install the device in it.
-
Using the magnet in the holder, attach the device to a metal plate on the monitor.
-
Secure it with the security sticker by sticking the rear part of the holder to the monitor.
-
Connect the device to a USB port on a computer or a wall charger.
-
To control the white light illuminating the desk surface, touch the left panel once to light up the LED strip. Subsequent presses will change the lighting to one of five colors. To reduce or increase the light intensity, hold the left touch panel and release it when you achieve a satisfactory effect. To turn off the desk lighting, quickly touch the left panel twice.
-
To control the colored LED strip, touch the right panel once to turn on the lighting effect for the area behind the monitor. Each subsequent touch will change the color or lighting effect. You can choose freely from seven static colors and eight dynamic effects
such as gradient and rainbow effect. To turn off the RGB lighting, hold down the right panel for two seconds. -
The device has a built-in memory. The next time you use it, the previously selected effect will turn on automatically.
Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other people
on the portal ceneo.pl, on social media or on the
website of the store where you made the purchase. If you want to show off our
device on SAVIO FanPage on Facebook, we will be very pleased.
If there is something that we could improve on our products, please write to
us at [email protected]
Thanks to your feedback, we will be able to better adapt the product to your
expectations.
Before starting the use of purchased device it is recommended to read the whole manual.
The main features of the product
- Aluminum housing
- Touch controls
- colors of white light
- Adjustable brightness
- RGB strip
- 7 colors
- 8 effects
- Simple magnetic mounting
- Memorization of settings
Package contents
- SAVIO RGB Light bar with a USB cable
- Mounting bracket
- Mounting plate
- Security sticker
- User manual
Technical specification:
- Input voltage: 5 V, 1.5 A
- Rated power: 7.5 W
- LED light source: LED chip 2835
- Number of LEDs: 94
- Color temperature: 2700 K – 7500 K
- Working temperature: -10°C ~ 45°C
- Device dimensions: 440 × Φ22 mm
- CRI: >82
- Cable length: 1.8 m
Product scheme
- SAVIO RGB Light bar
- Mounting bracket
- Mounting plate
- USB cable
- Security sticker
- Left touch panel
- Right touch panel
Assembly instruction
- Wipe the top and back of the monitor to remove dirt.
- Remove the protective foil from the mounting plate and stick it on the top part of the monitor.
- Pull the cable through the hole in the holder and install the device in it.
- Using the magnet in the holder, attach the device to a metal plate on the monitor.
- Secure it with the security sticker by sticking the rear part of the holder to the monitor.
- Connect the device to a USB port on a computer or a wall charger.
Lighting control
You control the device by two touch panels located at both ends of the Lightbar. The button on the left is responsible for controlling the white light illuminating the desk surface. Touching the panel once will light the LED strip. Subsequent presses will change the lighting to one of 5 colors. To reduce or increase the light intensity, hold the left touch panel and release it when you achieve a satisfactory effect. To turn off the desk lighting, quickly touch the left panel twice. The right touch panel is responsible for controlling the colored LED strip. One-touch will turn on the lighting effect for the area behind the monitor, and each subsequent touch will change the color or lighting effect. You can choose freely from 7 static colors and 8 dynamic effects such as gradient and rainbow effect. To turn off the RGB lighting, hold down the right panel for 2 seconds. The device has a built-in memory. The next time you use it, the previously selected effect will turn on automatically.
Safety conditions:
- Use as intended.
- Incorrect use may damage the product.
- Do not use the product in a hot, cold or dusty environment.
- The warranty does not cover any mechanical damage to the product.
- The product should be used in a dry environment.
- The device should be protected against water and moisture.
Warranty:
The warranty covers a period of 24 months.
Independent repairs and modifications result in automatic loss of the
warranty.
Warranty card is available for download on our website:
www.savio.net.pl/en/service
Information of the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get into air, soil and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protecion by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.
PRODUCER:
Elmak Sp. z o.o.
ul. Morgowa 81
35-323 Rzeszów
www.savio.net.pl
References
- Ceneo - porównanie cen, sklepy, perfumy, agd, rtv, komputery
- Strona główna - Savio
- Do pobrania - Savio
- Do pobrania - Savio
- Strona główna - Savio
- Serwis i wsparcie - Savio