Vibe sound DG-PLDT LED Party Speaker with Carrying Handle Instruction Manual
- June 13, 2024
- Vibe sound
Table of Contents
LED
PARTY SPEAKER
WITH CARRYING HANDLE
Operation Manual DG-PLDT
PRODUCT DIAGRAM
PRODUCT FUNCTIONS
- 5creen
- TF card slot
- Charge port
- Microphone input
- Mode button
- Previous frack
- Play/Pause
- Next frack
- 0n/Off & Volume control
- AUX input
- USB input
SPECFICATIONS
- Bluetooth Version: V5.0
- Speaker Power: SW
- Play Time: Up to 3 hours
- Power Supply: lithium-ion
- Battery capacity: 800mAh
- Charging Interface: Micro USB
- Charge cable included
- Driver unit: 5
- S/N ratio: >= 85dB
- DC input: USB 5V
- Transmission distance: up to 10m
- Dimension: 12″ x 5.3’x 7″
- FCC ID: 2AANZPLDT
- BT ID: D0S59694
PAIRING YOUR SPEAKER
- 7o pair the device, tum the speaker on and wait for @ beep” 1o being pairing.
- From your smart phone or tablet, find a st of nearby devices and choose “DG-PLDT’
- Enter “0000” if asked. The speaker will the pairing is complete.
« It the speaker beep” when has been paired prior, it will connect automatically « Be sure Bluetooth is enabled on your smart phone or tablet before starting the pairing process.
« The speaker has a bluetooth range of 33it. Be sure to keep your smartphone or fabled within this range to avoid playback issues
USING THE SPEAKER
- To charge: Insert the included micro-USB unto the DCSV port on your speaker. Connect to any normal USB-A port for power.
- The speaker can play media off of TF card or US stick.
- The speaker will automatically change between modes when a new form of media is inserted.
- Use the “M” button to change between speaker modes.
SAFETY GUIDELINES
- Please read the instruction carefully before use and keep them for reference.
- Keep the speaker away from heat and open fie.
- Do not insert sharp objects and metal info the speaker to avoid a short circuit
- Do not attempt to repair the speaker.
- Tum the device of if exposed to extreme heat or liquor.
- Do not attempt o use the speaker with AC input, be sure: the device is unplugged from power and charged before each use.
FCC STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Please
note that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
Turing the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Vibe guarantees the quality of this product.
For questions or comments, please feel free to contact us
via email at [email protected]
Distributed by DGL Group, Lid. 2045 Lincoln Hwy, Edison, NJ, 08817, USA.