J-TECH DIGITAL JTD-3145 4K 60Hz 1×4 HDMI Splitter Extender User Manual

J-TECH DIGITAL JTD-3145 4K 60Hz 1×4 HDMI Splitter Extender

Specifications

• Operating Temperature Range:
• Operating Humidity Range:
• Input Video Signal:
• Input DDC Signal:
• Data Transfer Speed Rate:
• Input Port:
• Output Ports:
• Video Formats Supported:
• Vertical Frequency Range Supported:
• Supported Audio Formats:
• Transmission Distance:
• Power Consumption:
• Dimensions (L x W x H):
• Net Weight:

Product Usage Instructions

Connection Setup:

1. Connect the HDMI input source to the transmitter unit.
2. Connect the HDMI loop output to a display or monitor.
3. Connect the UTP outputs to the receivers using CAT5e/6 cables.
4. Connect IR cables for IR transmission.
5. Power on the devices using the provided DC adapter.

Audio and Video Configuration:
Configure audio settings based on your preference (LPCM2.0/5.1,DTS 5.1, Dolby Digital, etc.). Adjust video settings for optimal display resolution.

Upgrade and Maintenance:
Use the provided USB cable for firmware upgrades. Perform regular maintenance checks to ensure proper functioning of the extender.

4K 60Hz 1×4 HDMI Splitter Extender Up To 196ftJTD-3145 | JTECH-14EX60-AEUSER

J-TECH DIGITAL INC. 9807 EMILY LANE STAFFORD, TX 77477 TEL: 1-888-610-2818
E-MAIL: SUPPORT@JTECHDIGITAL.COM

Scan the QR code below or visit https://resource.jtechdigital.com/products/3145 to view and access detailed digital resources regarding this unit.

Safety Instructions

• Before using this product, please carefully read the following safety instructions to ensure its proper use and keep this manual for future reference:
• To prevent electric shock, do not attempt to open the product.
• Only qualified personnel should perform any repairs or maintenance.
• Always place the product on a stable, flat surface to prevent it from falling.
• Do not expose the product to water, moisture, or high-humidity environments to avoid the risk of damage.
• To prevent damage from direct sunlight or high temperatures, do not expose the product to such environments.
• Do no place the product near heat sources like radiators, heat registers, stove, or other heat-producing apparatus.
• Do not place any objects on top of the product to avoid damage.
• Use only the attachments and accessories specified by the manufacturer.
• During lightning storms or prolonged periods of disuse, unplug the power supply to prevent damage.

Description
JTECH-14EX60-AE is a 196ft. (60m) extender with 1 HDMI input, 1 HDMI loop out and 4 UTP output. It supports 4K 60Hz. The 1×4 extender has the ability to equalize and amplify to ensure that the HDMI signal is transmitter without loss of quality. This splitter can be used for digital entertainment centers, retail and display websites, set-top boxes, security rooms, data control centers, conference rooms, schools, and enterprise training environments.

Features

• 1 x HDMI Input | 1 x HDMI Loop-out & 4 x UTP Outputs
• 4K 60Hz up to 196ft. over single CAT5/6
• HDCP 2.2/1.4 compliant
• Supports audio extraction (Analog and Toslink SPDIF)
• Supports HDR10, HLG
• Supports USB upgrade
• Audio formats such as LPCM2.0/5.1, DTS 5.1, Dolby Digital, Dolby Digital+, Dolby True HD
• Support Bi-Directional wide band IR
• Supports PoC (Receivers are powered by the Transmitter)
• Supports auto downscale 4K@60hz to 1080P at RX end
• Features one built-in reset button for factory reset

Package Contents

• 1 x HDMI Transmitter, 4 x HDMI Receivers
• 1 x 12V / 2A DC Adapter
• 5 x IR TX Cable, 5 x IR RX Cable
• 1 x User Manual
• 2 x Rack mount for TX and 8pcs for RX
• 1 x USB cable

Specifications

Product Requirements

EDID Switch Settings
This splitter supports EDID management through a 3-pin dip switch:
Up dial stands for 0; down dial stands for 1
Different digit combinations have different EDID effects according to the following table.

Note: all other digit combinations not listed above is for EDID 4K@60 4:2:0 2CH

HDCP

HDMI Input| Display (HDCP 2.2 / 1.4)| Display (HDCP 1.4)| Display (No HDCP)
---|---|---|---
HDCP 2.2| HDCP 2.2| No Signal| No Signal
HDCP 1.4| HDCP 1.4| HDCP 1.4| No Signal
HDCP Off| No HDCP| No HDCP| No HDCP

Upgrade

1. Connect between PC and product by USB cable, and open upgrade tool “UART_ISP_V1.7 exe”
2. Click “Refresh”, and choose correct COM
3. Baud rate: 115200
4. Type “A1” into port, choose the firmware for upgrade
5. Click “UPDATA” until successful

Connection

Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.

Warranty

If your product does not work properly because of a defect in materials of workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated as below,”Parts and Labor (1) Year”, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.
During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.

Mail-In Service
When shipping the u nit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.

Limited Warranty Limits and Exclusions

This Limited Warranty ONLY COVERS failures due to defects in material or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, mis- adjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributed to acts of God.
There are no express warranties except as listed under “Limited Warranty Coverage”. The warrantor is not liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of this warranty. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive but are for illustration only). Parts and service, which are not covered by this limited warranty, are your responsibility.

WWW.JTECHDIGITAL.COM PUBLISHED BY J-TECH DIGITAL INC.
9807 EMILY LANE
STAFFORD, TX 77477
TEL: 1-888-610-2818
E-MAIL: SUPPORT@JTECHDIGITAL.COM

Frequently Asked Questions

How do I reset the extender?

Press and hold the reset button for 3 seconds to perform a factory reset.

What is the maximum transmission distance supported?

The extender supports transmission up to 196ft over single CAT5e6 cables.

Can I extract audio using this extender?

Yes, the extender supports audio extraction including Analog and Toslink SPDIF.

References

• J-Tech Digital ® Official Site | Professional AV Solution Provider

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>