PNi MIKE 65 Bluetooth microphone and dongle / Bluetooth User Manual

June 4, 2024
PNI

PNi MIKE 65 Bluetooth microphone and dongle / Bluetooth

Introduction

The PNI Mike 65 Bluetooth microphone can communicate wirelessly with the CB radio (for example: PNI Escort HP 6500, PNI Escort HP 7120). Thus, you can get out of your car (up to 10 meters away) and continue the communication.
Note: In order for your CB radio to be compatible with the PNI Bluetooth adapter, it must have power on the RJ45 jack.
To allow wireless communication between the microphone and the CB radio, you must connect to your CB radio the Bluetooth adapter included in the package. Then, you need to pair the Bluetooth adapter with the Bluetooth microphone. You can connect the Bluetooth microphone to both the radio and the mobile phone at the same time. That way, you can answer the phone without picking up the phone.

Battery compartment

To open the battery compartment, turn the clip on the back of the microphone to the right or left. Then, using a screwdriver, gently turn to the right the screw on the top. Remove the cover. The microphone includes a 3.7V 1200mAh Li- Ion battery.

Charging the battery

Insert one end of the USB cable included in the package into the jack on the bottom of the microphone, and the other end of the cable into the USB port of a computer or 230V-5V USB adapter. While the battery is charging, the LED on the microphone is red. When the battery is fully charged, the LED turns green.

Pairing microphone and Bluetooth adapter

PNi MIKE 65 Bluetooth microphone and dongle - Bluetooth-
fig4

Note: The microphone and the adapter are factory paired.

  1. When the CB radio is turned off, insert the Bluetooth adapter into the RJ45 connector of the radio (instead of the microphone).
  2. Turn on the radio and wait for the adapter to enter pairing mode. The LED starts flashing red and blue.
  3. Turn on the Bluetooth microphone by pressing and holding the M key. You will hear the prompt “Power on”. The LED on the microphone will flash red and blue until the connection between the microphone and the adapter is made.
  4. Once the connection is established, you will hear the prompt “Connected”. The LED on the microphone will flash blue.
  5. Press the PTT key to transmit.

Pair mobile phone, Bluetooth microphone and adapter

PNi MIKE 65 Bluetooth microphone and dongle - Bluetooth-
fig5

  1. Pair your Bluetooth microphone with your mobile phone:
    Nota: Turn off the radio before pairing the microphone with the phone

    • Turn on the Bluetooth microphone by pressing and holding the M key. You will hear the prompt “Power on”. The LED on the microphone will flash red and blue until the connection between the microphone and the adapter is made.
    • Turn on Bluetooth function on your mobile phone. From the list of Bluetooth devices, select PNI Mike 65.
    • Once the connection is established, you will hear the prompt “Connected”. The LED on the microphone will flash blue.
  2. Turn off the Bluetooth microphone by holding down the M key until you hear the prompt “Power off”.

  3. Pair the Bluetooth microphone with the adapter by following the steps in the “Pairing microphone and Bluetooth adapter” chapter.

  4. Manually reconnect the microphone to your mobile phone.
    Now all 3 devices: Bluetooth microphone, Bluetooth adapter and mobile phone are connected.
    To transmit, press the PTT key on the microphone. To answer a phone call, briefly press the M key. To end a call, briefly press the M key.

Microphone technical specifications

  • Frequency: 2.4GHz
  • Transmission power: 2.5mW (4dB)
  • Battery: Li-Ion 3.7V 1200mAh
  • Communication distance: up to 10 m
  • Operating time (100% charged battery): up to 8 hours
  • Dimensions: 90 x 43 x 58 mm
  • Weight: 113 g (battery included)

Dongle technical specifications:

  • Frequency: 2.4GHz / Transmission power: 2.5mW (4dB)
  • Connector: RJ45
  • Communication distance: up to 10 m
  • Dimensions: 40 x 28 x 17 mm
  • Weight: 8g

Simplified EU Declaration of Conformity

SC ONLINESHOP SRL declares that PNI Mike 65 Bluetooth Microphone and Dongle is in accordance with EMC Directive 2014/30/EU and RED Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.mypni.eu/products/8576/download/certifications

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals