nedis ASWI2424AT Analog Audio Switch User Guide

nedis ASWI2424AT Analog Audio Switch

Specifications:

• Product Name: Analogue Audio Switch ASWI2424AT
• Intended Use: Connect 4 audio source devices to a single output device and switch between inputs
• Connectivity: RCA (stereo) and 3.5 mm audio inputs
• Indoor Use Only

Product Usage Instructions

Main Parts:

• 1 RCA (stereo) output
• 3 RCA (stereo) inputs
• 2 Control dial
• 4 3.5 mm audio input

Safety Instructions:
WARNING: Follow safety guidelines when installing the product.

Installation:

1. Ensure all devices are switched off.
2. Connect up to four audio source devices to the inputs using RCA or 3.5 mm audio cables.
3. Plug the other end of the cable into your audio output device.

Using the Product:

1. Switch on the connected audio devices.
2. Use the control dial to switch between audio inputs.

Disposal:
The product should be disposed of at an appropriate collection point. Contact the retailer or local waste management authority for more information.

FAQ:

• Q: Can I use this product outdoors?
  A: No, this product is intended for indoor use only.

• Q: How many audio source devices can be connected?
  A: Up to four audio source devices can be connected to the Analogue Audio Switch.

• Q: What type of cables are required for connection?
  A: RCA (stereo) cables or a 3.5 mm audio cable are needed to connect the audio source devices.

Analogue Audio Switch

ASWI2424AT ned.is/aswi2424at

Nedis BV
De Tweeling 28
5215 MC ’s-Hertogenbosch The Netherlands

Quick start guide

Analogue Audio Switch

For more information see the extended manual online: ned.is/aswi2424at

Intended use

• This product is intended to connect 4 audio source devices to a single output device and switch between inputs, using RCA and AUX cables (not included).
• The product is intended for indoor use only.
• Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts (image A)

1. RCA (stereo) output
2. Control dial
3. RCA (stereo) inputs
4. 3.5 mm audio input

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.

Installing the product (image B)

Make sure all the devices you want to connect have been switched off.

1. Connect up to four audio source devices to the inputs A 3 4, using RCA (stereo) cables or a 3,5 mm audio cable (not included).
2. Plug the other end of the cable into your audio output device.

Using the product

1. Switch on the connected audio devices.
2. Use the control dial A2 to switch between audio inputs.

Specifications

• 3 x RCA (Stereo)
• 1 x 3.5 mm audio jack

Output port| 1 x RCA (Stereo)

Disposal

• The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
• For more information, contact the retailer or the local authority responsible for the waste management.

References

• Analogue Audio Switch | 4 port(s) | Connection input: 1x 3.5 mm Audio Input / 3x (2x RCA Female) | Connection output: 1x (2x RCA Female) | Manual | Metal | Anthracite

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>