OSIRIS SV-01 Bluetooth Headset Instructions
- June 16, 2024
- OSIRIS
Table of Contents
OSIRIS SV-01 Bluetooth Headset
Specifications
- Product Name: Bluetooth Headset SV-01
- FCC Compliance: Part 15 of the FCC Rules
- Operating Conditions: Portable exposure conditions without restriction
Product Usage Instructions
Step 1: Charging
Before using the Bluetooth headset for the first time, it is recommended to
fully charge it. Follow the steps below to charge the headset:
- Connect the provided charging cable to the charging port of the headset.
- Plug the other end of the charging cable into a power source.
- The LED indicator on the headset will illuminate to indicate that it is charging.
- Once fully charged, the LED indicator will turn off.
Step 2: Pairing
To use the Bluetooth headset with your device, you need to pair them.
Follow these steps:
- Ensure that the Bluetooth function on your device is enabled.
- Press and hold the power button on the headset until the LED indicator starts flashing.
- Search for available Bluetooth devices on your device.
- Select “Bluetooth Headset SV-01” from the list of available devices.
- If prompted, enter the passcode “0000” to complete the pairing process.
- The LED indicator on the headset will stop flashing when the pairing is successful.
Step 3: Using the Bluetooth Headset
Once the pairing is successful, you can use the Bluetooth headset for
various functions:
- To answer a call: Press the multifunction button once.
- To end a call: Press the multifunction button once.
- To reject a call: Press and hold the multifunction button for a few seconds.
- To adjust the volume: Use the volume up and volume down buttons on the headset.
- To play or pause music : Press the multifunction button once.
- To skip to the next track : Double press the multifunction button.
- To go back to the previous track: Triple press the multifunction button.
KeyOperating Instructions
- Long press of three seconds is powered on. off
- IN wireless mode when get the call. Short Press answers the calls; Long Press Refuse to listen, continuous push 2 times is redial
- Playing: Short Press: Play/Pause;
- -and <:DIn Wireless/MP3 mode, Long Press:Previous;Short Press: volume-
- +and >:2In Wireless/MP3 mode, Long Press: next, Short Press: volume +
- M: Short Press to change the mode, Wireless/MP3
LED Indicator
- Wireless mode: pairing status blue light flashing, after pairing the blue light flashing.
- In MP3 mode: the blue light will slow flashing when playing;
- In charging mode the red light is on steadily when charging, when it’s fully charged, the red light will be off.
LINE Connecting TO Audio Jack
- Insert audio line, Go directly to the AUX LINE IN pattern, at this time for ordinary headset headphones, buttons
- Support mobile phone/iPod/MP4/MP3/CD/PC,etc
Functional Parameter
- USB charge: DC5VIN
- SNR: 88 Db
- Wireless distance: 10 meters
- Output power: 35mW
- Wireless frequency: 2.401-2.480GHz
- Charging time: 2 hours
- Call duration: 6 hours
- Standby time: 18 hours
FCC
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. which is determined aye in the equipment to radio television encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
FAQ
(Frequently Asked Questions)
- Q: How long does it take to fully charge the Bluetooth headset?
- A: The charging time may vary, but it usually takes around 2 hours to fully charge the headset.
- Q: Can I use the Bluetooth headset while it is charging?
- A: Yes, you can use the Bluetooth headset while it is charging. However, it is recommended to fully charge it before prolonged use.
- Q: How far can I be from my device and still maintain a Bluetooth connection?
- A: The range of the Bluetooth connection may vary depending on environmental factors, but typically it can maintain a stable connection within a range of up to 33 feet (10 meters).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>