nedis WCPBK80GN Solar Panel Powerbank Instruction Manual

Solar Panel
Powerbank for 5V / 6V / 12V wildlife cams
WCPBK80GN

WCPBK80GN Solar Panel Powerbank

For more information see the extended manual online: ned.is/wcpbk80gn

http://ned.is/WCPBK80GN

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands

Intended use

The Nedis WCPBK80GN is a power bank that charges using a built-in solar panel.
This product can output energy to 5V, 6V or 12V wildlife cameras.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision. Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts (image A)

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
• Retain the original product literature for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Always replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk ofelectric shock.
• The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use.
• In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
• Only power the product with the voltage corresponding to the markings on the product.
• During charging the product must be placed in a well-ventilated area.
• When charging, do not place the product on flammable materials such as rugs, carpets or bedding.
• Disconnect the product from the power outlet and other equipment if problems occur.
• Do not open the product.
• Keep the product out of reach from children.
• Only use the provided charging cable.

Mounting the product (image B & C)

1. Place the product within 3 meters of the camera on a location with the most sun during the day.
   Follow steps 2 – 8 for stone/concrete surfaces.
   Continue to step 5 for wood surfaces.

2. Mark the drill holes with a pencil using the mounting bracket A3.

3. Drill three holes.

4.  Insert suitable plugs.

5.  Place the nut around the spacer A5.

6.  Fasten the mounting bracket A3 with the screws.

7.  Screw the spacer A5 into the tripod mount A2.

8.  Tighten the adjustment ring A4 to secure the solar panel A1.

Charging the power bank
**** You can charge the product in two ways.
For charging via the solar panel:

1. Place the product on a location with the most sun during the day. Point the solar panel A1 towards the sun.
   ** The charging indicator LED A6 lights up blue to indicate that the product is charging using the solar panel A1.**

For charging via the USB charging cable:
Only use the provided charging cable.

1. Insert the USB-A cable A11 or the USB-C cable A12 into the 5V input port A10.
2.  Insert the other end of the USB-A cable Aw or the USB-C cable A12 into a 5V/1A power adapter.
3. Plug the power adapter into a power outlet.
   **The charging indicator LED A6 lights up red to indicate that the product is charging using the 5V input port A10.**

  To extend the lifetime of the battery, charge the product periodically if it is left unused for extended periods.

Charging your device

1. Insert one end of the extension cable A13 into the 5V, 6V or 12V output port A7 8 9.
2.  Connect the other end of the extension cable A13 to the wildlife camera cable A14.
3.  Connect the other end of the wildlife camera cable A14 into your device.

Disposal
The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible for the waste management.

References

• Solar Panel | 5 / 6 / 12 V DC | 0.5 / 1.0 A | DC Jack | Accessory for: WCAM130GN / WCAM150GN / WCAM250GN / WCAM460GN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>