WESECUU C1V5LQIw0RL Wired PTZ Wifi Camera User Guide

WESECUU C1V5LQIw0RL Wired PTZ Wifi Camera

Interface description

This manual is suitable for various types of cameras. (The appearance may be different due to different batches. The details are subject to the receipt. This manual is only for the installation instructions of this series of equipment)

Wireless Pan-tilt IP Camera

Description

1. Reset button
   • The working state of the device, long press 5 seconds to restore the factory settings, and the camera will have a voice prompt broadcast.
2. SD card slot
   • TF card, storage video, and playback video.
3. Power supply Power input.

Installation and placement

Wireless Pan-tilt IP Camera

Table placement

• Place on a desk or table.

Ceiling installation

• Drive the expansion rubber plug into the ceiling, and use screws to fix the base of the bracket to the ceiling;
• Install the device on the stand.

Software Installation

• APP Download and Installation
• Users can search”EseeCloud(IP Pro, VR Cam)” on the APP store or Google Play, or scan the QR code below to install the APP.
• Note: For the iOS system, it requires an iOS 9.0 version or above.For Android, Android 5. 1 or above.
• Step 1 If you are prompted to open certain permissions (such as location, message notification, etc.) during APP installation, click Allow (agree).

Step 2

• Account register: Open the APP, click”Register”, and enter your email or phone number to create an account.
• Account login: On the login interface, enter the account/ phone number/email, and the corresponding password, and click the “OK” button to log in.
• Third-party login: The APP supports third-party login.
• Click the third-party social software icon, jump to the APP to complete the authorization, and log in.

Bluetooth adding process with network

• Before adding a camera, please make sure that the Bluetooth function of the mobile phone has been turned on, and do not turn off the Bluetooth during the adding process.
• If a prompt box pops up during the adding process to enable Bluetooth or Bluetooth authorization, please follow the steps in the prompt to enable it;

Step 1

• After the camera is powered on, open the “EseeCloud “APP and click the “+” icon in the upper right corner to enter the interface for adding devices.
• (If the permission prompt pops up, click agree)

Step 2

• The APP will automatically search for a new device and click the Add button when it finds the device.
• (If you do not see the pop-up device box, please click “scan to add” to scan the QR code on the camera body)

Step 3

• Enter the WIFI name and password on the distribution network screen.
• (This product only supports 2.4G WiFi please connect to the 2.4G WiFi, not 5G WiFi)

Step 4

• After the network is configured successfully, the system prompts you to enter the device name. Click Next.

Step 5

• Users can choose to enable or disable message push according to their own preferences (generally recommended to enable)

Step 6

• Congratulations, you have successfully connected the device.

Or you can add a camera by WiFi configuration

Step 1

• Open the APP, click the “+” icon in the middle of the interface to enter the scan code interface;

Step 2

• Click the “Camera scan code add” method

Step 3

• Check whether the camera light is blinking

Step 4

• Select the WiFi that the camera needs to connect to, enter the password, and click Next;

Step 5

• Point the camera at the QR code that appears on the screen of the phone

Step 6

• After the network configuration is successful, set a name for the camera.

Help FAQ

Q1: Why is the pairing network unsuccessful?

1. Please make sure that the distance between the camera, the router, and the mobile phone is close enough when configuring the network.
2. Please note: 2.4GWiFi is supported, 5G WiFi signal network is not supported.
3. Please check whether the WIFI name and password are correct.
4. Please long-press the reset button for 5 seconds and try again after restoring the camera to the factory settings.

Q2: Why is there no playback?

1. Make sure that the TF card has been inserted into the camera and try to turn on/off the camera.
2. Enter the camera settings menu to check the storage status ‘in good condition ( if the status is abnormal, click on Format the memory card.)

Q3: Why is the camera offline?

1. It may caused by router WIFl signal interference or network reasons. Power off and restart the optical modem, router, or camera.
2. The camera may be too far away from the WIFI router, try to get the camera next to the WIFI router.
3. Whether the WIFI password has been changed, try to reset the camera and try pairing again.

Q4: Why my phone does not have an alarm push function or two-way audio?

1. Check your mobile phone permission settings, and make sure that enable the notification permission of the “EseeCloud” App.
2. Open your phone’s Settings
   • Apps and Notifications, select Apps and Notification Management respectively, find the “EseeCloud” app, and turn on all permissions.

After Service

1. Thanks for your purchase and support, we appreciate all your valuable feedback.
2. If you have any questions about our products, please feel free to contact us.

• Toll-Free: +1 888 971 6718
• Email:serviceus@wesecuu.net
• Before operating this unit, please read these instructions carefully, and save them for future use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>