RUST-OLEUM ROC-268 Concrete Wall Paint Instruction Manual

: June 17, 2024
: Rust-Oleum

Table of Contents

RUST-OLEUM ROC-268 Concrete Wall Paint
Product Information
DESCRIPTION AND USES
PRODUCT APPLICATION
PHYSICAL PROPERTIES
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RUST-OLEUM ROC-268 Concrete Wall Paint

RUST-OLEUM-ROC-268 Concrete-Wall-Paint-product

Product Information

Specifications

Product : Rust-Oleum Concrete Interior Wall Paint
Model: ROC-268
SKU: 379906 (Charcoal Gray), 379908 (Sidewalk Gray)
Recommended Use: Interior walls
Not recommended for use on floors or exterior surfaces

FAQ

Q: Can I use Rust-Oleum Concrete Interior Wall Paint on floors?
- A: No, it is not recommended for use on floors. This product is designed for interior wall surfaces only.
Q: How should I achieve the best concrete effect?
- A: To achieve the best concrete effect, apply multiple coats of paint using a cross-hatch pattern with light, even strokes. Use varying amounts of paint to create depth and texture.

DESCRIPTION AND USES

Rust-Oleum® Concrete Interior Wall Paint is a semi-transparent matte finish that creates a textured concrete effect. Can be applied to drywall, wood and hardboard. Formulated to provide a faux concrete look to interior surfaces.

NOTE

Not recommended for use on floors or exterior surfaces.

PRODUCTS

SKU	DESCRIPTION (Quart)
379906	Charcoal Gray
379908	Sidewalk Gray

PRODUCT APPLICATION

READ ALL DIRECTIONS BEFORE BEGINNING PROJECT

SURFACE PREPARATION

Surface must be free of any dust, grease, oil, stains, rust or any other contaminants. Sand glossy surfaces before painting and wash walls if necessary. Fill in any cracks or holes to ensure a smooth surface. Drywall joint compound must dry for two days. New drywall and bare wood should be primed before painting. Allow new plaster to cure for 30 days before painting. Tape around the area you wish to paint before beginning.

WARNING: If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.eps.gov/lead.

Gray basecoat or gray primer required for Charcoal and white basecoat or white primer required for Sidewalk Gray. Zinsser® Bulls Eye 1-2-3® gray primer is recommended on bare wood, drywall and other porous surfaces. Follow primer manufacturer’s instructions for dry time.

APPLICATION

Rust-Oleum Concrete Interior Wall Paint must be applied with a brush. The paint will be semi-transparent and allow the primer to show through giving the effect of concrete once dry. Stir thoroughly. For best results, use a 3″-5″ brush. Alternate brushing direction using a cross hatch pattern. Build concrete effect with multiple coats. Allow to dry between coats. Continue to use light, even strokes on subsequent layers allowing multiple layers to show through.

TIPS

For tips and techniques, www.rustoleum.com/concretewall

DRY AND RECOAT TIMES

Based on 77°F (25°C) – 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 30 minutes and fully dry in 1-2 hours. Allow additional coats to dry 1-2 hours between coats.

CLEANUP

Clean brush and other application tools immediately with soap and water.

COVERAGE

Up to 30 sq. ft. per quart. For best coverage results, use gray basecoat or primer for Charcoal and white basecoat or primer for Sidewalk Gray. The first coat does not provide full coverage. Build layers with brush strokes and varying amounts of paint to build depth and concrete effects.

PHYSICAL PROPERTIES

	CONCRETE WALL PAINT
Resin Type	Acrylic
Pigment Types	Titanium Dioxide, Calcium Carbonate
Solvents	Water, Texanol, Propylene Glycol

Weight

| Per Gallon| 8.88 lbs.
Per Liter| 1.06 kg

Solids

Dry Times at 70-80°F and 50% Relative Humidity

The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All technical information is subject to change without notice.