DELL E2723HN Monitor User Guide

June 9, 2024
Dell

E2723HN Monitor

Dell E2723HN Monitor
User’s Guide
Monitor Model: E2723HN Regulatory Model: E2723HNc

NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Copyright © 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. 2022 ­ 02 Rev. A00
2

Contents
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . 6 About your monitor . . . . . . . . . . . . . . . . . . . . . . . . . .7
Package contents . . . . . . . . . . . . . . . . . . . . . . 7 Product features . . . . . . . . . . . . . . . . . . . . . . . 9 Identifying parts and controls . . . . . . . . . . . . . . . 10
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Back view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Side view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Bottom view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Monitor specifications . . . . . . . . . . . . . . . . . . . 13
Resolution specifications . . . . . . . . . . . . . . . . . . . . . . 14 Preset display modes . . . . . . . . . . . . . . . . . . . . . . . . 15 Physical characteristics. . . . . . . . . . . . . . . . . . . . . . . 18 Environmental characteristics . . . . . . . . . . . . . . . . . . . 19
Plug and play capability . . . . . . . . . . . . . . . . . . 20 LCD monitor quality and pixel policy . . . . . . . . . . . 20 Ergonomics. . . . . . . . . . . . . . . . . . . . . . . . . 20 Handling and moving your display . . . . . . . . . . . . . 22 Maintenance guidelines . . . . . . . . . . . . . . . . . . 23
Cleaning your monitor. . . . . . . . . . . . . . . . . . . . . . . . 23
Setting up the monitor. . . . . . . . . . . . . . . . . . . 25 Attaching the stand . . . . . . . . . . . . . . . . . . . . 25
3

Connecting your monitor . . . . . . . . . . . . . . . . . 26
Connecting the VGA/HDMI Cable . . . . . . . . . . . . . . . . . 26
Organizing cables . . . . . . . . . . . . . . . . . . . . . 27 Securing your monitor using Kensington lock (optional) 28 Removing the monitor stand . . . . . . . . . . . . . . . 29 To remove the VESA cover. . . . . . . . . . . . . . . . . 30 Wall mounting (optional) . . . . . . . . . . . . . . . . . 31
Using tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Operating your monitor . . . . . . . . . . . . . . . . . . . . . 33
Turning on the monitor . . . . . . . . . . . . . . . . . . 33 Using the control buttons . . . . . . . . . . . . . . . . . 33
Control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Using the OSD lock function . . . . . . . . . . . . . . . 35
Use the Lock menu to lock the button(s). . . . . . . . . . . . . . 35 Use the front-panel control button to lock the button(s).. . . . . 36 To unlock the button(s). . . . . . . . . . . . . . . . . . . . . . . 37 OSD controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using the On-Screen Display (OSD) menu . . . . . . . . 39
Accessing the OSD menu . . . . . . . . . . . . . . . . . . . . . . 39
Setting the maximum resolution . . . . . . . . . . . . . 52
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Built-in diagnostics . . . . . . . . . . . . . . . . . . . . 54 Common problems . . . . . . . . . . . . . . . . . . . . . 56
4

Product-specific problems . . . . . . . . . . . . . . . . 58
Regulatory information . . . . . . . . . . . . . . . . . . . . . 59
FCC notices (U.S. Only) and other regulatory information59 EU product database for energy label and product information sheet . . . . . . . . . . . . . . . . . . . . . 59 Contacting Dell. . . . . . . . . . . . . . . . . . . . . . . 59
5

Safety instructions
Use the following safety guidelines to protect your monitor from potential damage and to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that you have read the safety information that shipped with your monitor.
NOTE: Before using the monitor, read the safety information that is shipped with your monitor and printed on the product. Keep the documentation at a secure location for future reference.
WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.
WARNING: The possible long-term effect of listening to audio at high volume through the headphones (on monitor that support it) may cause damage to your hearing ability. · Place the monitor on a solid surface and handle it carefully. The screen is fragile and can be damaged if dropped or hit sharply. · Ensure that your monitor is electrically rated to operate with the AC power available in your location. · Keep the monitor in room temperature. Excessive cold or hot conditions can have an adverse effect on the liquid crystal of the display. · Connect the power cable from the monitor to a wall outlet that is near and accessible. See Connecting your monitor. · Do not place and use the monitor on a wet surface or near water. · Do not subject the monitor to severe vibration or high impact conditions. For example, do not place the monitor inside a car trunk. · Unplug the monitor when it is going to be left unused for an extended period. · To avoid electric shock, do not attempt to remove any cover or touch the inside of the monitor. · Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on product. · Certain monitors can be wall mounted using the VESA mount that is sold separately. Ensure to use the correct VESA specifications as mentioned in the wall mounting section of the User’s Guide. For information on safety instructions, see the Safety, Environmental, and Regulatory Information (SERI) document that is shipped with your monitor
6 Safety instructions

About your monitor

Package contents
Your monitor ships with the components shown in the table below. If any component is missing, contact Dell. For more information, see Contacting Dell.

NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.

Component image

Component description Display

Stand riser Stand base VESATM Screw Cover

About your monitor 7

Component image

VGA

VGA

5

HDMI

VGA

2022-02 © 2022 Dell Inc. or its subsidiaries.

E2723HN 1

www.dell.com/E2723HN

Dell P/N: 9DW0F Rev. A00

F41G78S1700-*

Power cable (varies by countries)
Component description HDMI 1.4 cable
VGA cable (EMEA and Japan region)
· Quick Setup Guide · Safety, Environmental and
Regulatory Information

8 About your monitor

Product features
The Dell E2723HN monitor has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) Panel with LED backlight. The monitor features include: · 68.60 cm (27.0 in.) viewable area display (measured diagonally). · Wide viewing angles of 178 degrees in vertical and horizontal directions. · Static contrast ratio (1,000:1). · 1920 x 1080 resolution, with full-screen support for lower resolutions. · Easy and simple connectivity with legacy and new systems via HDMI. · Plug and play capability if supported by your computer. · On-Screen Display (OSD) adjustments for ease of setup and screen optimization. · Removable stand and Video Electronics Standards Association (VESATM) 100 mm
mounting holes for flexible mounting solutions. · Security-lock slot. · 0.3 W in Standby Mode. · Supports Dell Display Manager. · Optimize eye comfort with a TÜV-certified flicker-free screen. · TÜV-certified ComfortView feature is designed to reduce the amount of blue light
emitted from the monitor to help optimize eye comfort. WARNING: The possible long-term effects of blue light emission from the monitor may cause damage to the eyes, which includes but is not limited to eye fatigue and digital eye strain. ComfortView Plus feature is designed to reduce the amount of blue light emitted from the monitor to optimize eye comfort.
About your monitor 9

Identifying parts and controls
Front view

1

2

Control buttons

Label Description

1

Function buttons

2

Power On/Off button

(with LED indicator)

Use
To access the on-screen display (OSD) menu. (For more information, see Using the control buttons)
To turn the monitor on or off. Solid white light indicates that the monitor is turned on and functioning normally. Blinking white light indicates that the monitor is in Standby Mode.

10 About your monitor

Back view

2 3
1
Back View with monitor stand

DELL

E2723HN

Flat Panel Monitor /Monitor Plano Panel /Moniteur écran plat /

Model No. /Modelo /N°de modelo ///: E2723HNc Input Rating /Entrade /Daya Tegangan//Entrada de energía:100-240V 50/60Hz,1.5A

:100-240,1.5,50/60 Consumo de energía en operación: XX.X Wh – X.XXXX /² – X.XX – X.XX Apparatet må tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag. Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan. Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. The equipment must be connected to an earthed mains socket-outlet. L’appareil doit être branché sur une prise de courant munie d’une mise à la terre.

Made in China /Fabricado en China/ /Fabriqué en Chine/ /

: www.dell.com/regulatory_compliance Raheen Business Park Limerick Ireland (for EU Only)

XXXXXX-XX

CAN ICES-003(B)/NMB-003(B)

For UK only: Cain Road, Bracknell, RG12 1LF

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

R33037 RoHS

xxxxx

IS 13252 (Part 1)/

ZU10104-xxxx R-R-E2K-E2723HNc

:100V, 1.5 A, 50/60 Hz

XXXX XX

IEC 60950-1

:DELL INC.

:L&T Display Technology(Fujian)Ltd.(for Korea)

080-200-3800

R-41082465

Q40G027N-700-XXA www.bis.gov.in

1111240523

DELL

E2723HN

: E2723HN :
100-240V 50/60Hz,1.5A

Date of Mfg//: December. 2020

SVC Tag: 1234567 Express Service Code: 123 456 789 0

S/N: CN-012345TV100-96N-001V -A00
Q40G024N-700-XXA

4

5

Label Description

Use

1

Cable Management Clip

Organizes the cables when the cables are routed through the slot.

2

VESA mounting holes (100mm x Wall mounting (optional) the

100mm-behind the VESA cover) monitor using VESA-compatible wall

mount kit(100mm x 100mm).

NOTE:Wall mount kit is not shipped with your monitor and is sold separately.

3

Regulatory information label

Lists the regulatory approvals.

4

Regulatory label (including

Barcode, serial number and

Service Tag label)

5

Stand release button

Lists the regulatory approvals. Refer to this label if you need to contact Dell for technical support.The Service Tag is a unique alphanumeric identifier that enables Dell service technicians to identify the hardware components in your computer and access warranty information.
Release stand from monitor.

About your monitor 11

Side view

Bottom view

12

34

Bottom view without monitor stand

Label Description

1

Security-lock slot

2

Power port

3

HDMI port

4

VGA port

Use
Secure your monitor using a security lock (purchased separately) to prevent unauthorized movement of your monitor.
Connect the power cable
Connect your computer with HDMI cable.
Connect your computer with VGA cable

12 About your monitor

Monitor specifications

Model Screen type Panel type Viewable image Diagonal

E2723HN Active matrix-TFT LCD IPS
686 mm (27 in.)

Horizontal, Active Area 597.89 mm (23.54 in.)

Vertical, Active Area 336.31 mm (13.24 in)

Area Native resolution and refresh rate Pixel pitch Pixel per inch (PPI) Viewing angle

2010.76cm2 (311.67 in.2) 1920×1080 at 60Hz( HDMI1.4/VGA)
0.3114 mm x 0.3114 mm 81

Horizontal

178° (typical)

Vertical Luminance output Contrast ratio Faceplate coating

178° (typical) 300 cd/m² (typical) 1000 to 1 (typical) Anti-glare with 3H hardness

Backlight

LED edgelight system

Response time (Gray to Normal mode 8ms

Gray

Fast mode 5ms

Color depth

16.7 million colors

Color gamut

NTSC CIE1976(83%) CIE1931(72%)

Connectivity

1 x HDMI (ver 1.4)

1 x VGA Bezel width (edge of monitor to active area)

About your monitor 13

Top

12.89 mm

Left/Right

12.71 mm

Bottom

16.14 mm

Adjustability
Tilt
Dell display manager compatibility

-5° to 21° Yes

Security

Security-lock slot (cable lock optional purchase)

Built-in Speakers

No

(2 x 1 W sound output)

Resolution specifications

Model Horizontal scan range Vertical scan range
Maximum preset resolution

E2723HN 30 kHz to 85 kHz (automatic) 56 Hz to 75 Hz (VGA) 48 Hz to 75 Hz (HDMI)(automatic) 1920 x 1080 at 60 Hz(HDMI) 1920 x 1080 at 60 Hz (VGA)

14 About your monitor

Preset display modes VGA / HDMI Preset display modes

Display Mode
VESA,640 x 480 VESA,640 x 480 IBM,720 x 400 VESA,800 x 600 VESA,800 x 600 VESA,1024 x 768 VESA,1024 x 768 VESA,1152 x 864 VESA,1280 x 1024 VESA,1280 x1024 VESA,1600 x 900 CTA,1920 x 1080

Horizontal Frequency
(kHz)
37.50 31.47 31.47 37.88 46.88 48.36 60.02 67.50 63.98 79.98 60.00 67.50

Vertical Frequency
(Hz)
75.00 59.94 70.08 60.32 75.00 60.00 75.03 75.00 60.02 75.02 60.00 60.00

Pixel Clock (MHz)

Sync Polarity (Horizontal /
Vertical)

31.50

-/-

25.18

-/-

28.32

-/+

40.00

+/+

49.50

+/+

65.00

-/-

78.75

+/+

108.00

+/+

108.00

+/+

135.00

+/+

108.00

+/+

148.50

+/+

About your monitor 15

Electrical specifications

Model Video input signals

E2723HN
HDMI 1.4, 600mV for each differential line,100 ohm input impedance per differential pair.

AC input voltage/ frequency/current
Inrush current

Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance 100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.5 A
120 V: 30 A (max.) at 0°C (cold start)

Power consumption

240 V: 60 A (max.) at 0°C (cold start) 0.25 W (Off mode)1

0.30 W (Standby Mode)1

17 W (On Mode)1

30 W (Max.)2

14.8 W (Pon)3

47.07 kWh (TEC)3

1 As defined in EU 2019/2021 and EU 2019/2013.
2 Max brightness and contrast setting.
3 Pon: Power consumption of On mode as defined in Energy Star 8.0 version. TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information.

Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied.
NOTE: This monitor is ENERGY STAR certified.

16 About your monitor

ENERGY STAR is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) that promotes energy efficiency. This product qualifies for ENERGY STAR in the “factory default” settings and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. For more information on the ENERGY STAR program, refer to energystar.gov.
About your monitor 17

Physical characteristics

Model Signal cable type
Dimensions (with stand) Height Width Depth Dimensions (without stand) Height Width Depth

E2723HN · Digital: detachable, HDMI, 19 pins · Analog: detachable, D-Sub, 15 pins
458.90 mm (18.07 in.) 623.30 mm (24.54 in.) 188.29 mm (7.41 in.)
370.87 mm (14.60 in.) 623.30 mm (24.54 in.) 50.41 mm (1.98 in.)

Stand dimensions Height

189.86 mm (7.47 in.)

Width

245.19 mm (9.65 in.)

Depth

188.29 mm (7.41 in.)

Weight

Weight with packaging 6.81 kg (15.01 lb)

Weight with stand assembly and cables

4.86 kg (10.71 lb)

Weight without stand assembly (no cables)

3.80 kg (8.38 lb)

Weight of stand assembly 0.73 kg (1.61 lb)

Front-frame gloss

Black frame 2-4 gloss units

18 About your monitor

Environmental characteristics

Model

E2723HN

Compliant Standards

· ENERGY STAR certified monitor

· EPEAT registered where applicable. EPEAT registration varies by Country. See www.epeat.net for registration status by country.

· RoHS-compliant · TCO Certified

· BFR/PVC reduce monitor (The circuit boards are made from BFR/PVC-free laminates)

· Arsenic-free glass and Mercury-free for the panel only · Meets NFPA 99 leakage current requirement.

Temperature

Operating

0°C to 40°C (32°F to 104°F)

Non-operating · Storage: -20°C to 60°C (-4°F to 140°F)

· Shipping: -20°C to 60°C (-4°F to 140°F)

Humidity

Operating

10% to 80% (non-condensing)

Non-operating · Storage 5% to 90% (non-condensing)

· Shipping 5% to 90% (non-condensing)

Altitude

Operating (maximum)

5,000 m (16,400 ft)

Non-operating 12,192 m (40,000 ft) (maximum)

Thermal dissipation

· 102.36 BTU/hour (maximum) · 54.59 BTU/hour (typical)

About your monitor 19

Plug and play capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic, you can select different settings if desired. For more information about changing the monitor settings, see Operating your monitor.
LCD monitor quality and pixel policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at www.dell.com/pixelguidelines.
Ergonomics
CAUTION: Improper or prolonged usage of keyboard may result in injury.
CAUTION: Viewing the monitor screen for extended periods of time may result in eye strain.
For comfort and efficiency, observe the following guidelines when setting up and using your computer workstation:
· Position your computer so that the monitor and keyboard are directly in front of you as you work. Special shelves are commercially available to help you correctly position your keyboard.
· To reduce the risk of eye strain and neck, arm, back, or shoulder pain from using the monitor for long period, we recommend you to: 1. Set the distance of the screen between 20 in. to 28 in. (50 cm – 70 cm) from your eyes. 2. Blink frequently to moisten your eyes or wet your eyes with water after prolonged usage of the monitor. 3. Take regular and frequent breaks for 20 minutes every two hours. 4. Look away from your monitor and gaze at a distant object at 20 feet away for at least 20 seconds during the breaks. 5. Perform stretches to relieve tension in the neck, arm, back, and shoulders during the breaks.
20 About your monitor

· Ensure that the monitor screen is at eye level or slightly lower when you are sitting in front of the monitor.
· Adjust the tilt of the monitor, its contrast, and brightness settings.
· Adjust the ambient lighting around you (such as overhead lights, desk lamps, and the curtains or blinds on nearby windows) to minimize reflections and glare on the monitor screen.
· Use a chair that provides good lower-back support.
· Keep your forearms horizontal with your wrists in a neutral, comfortable position while using the keyboard or mouse.
· Always leave space to rest your hands while using the keyboard or mouse.
· Let your upper arms rest naturally on both sides.
· Ensure that your feet are resting flat on the floor.
· When sitting, ensure that the weight of your legs is on your feet and not on the front portion of your seat. Adjust your chair’s height or use a footrest if necessary to maintain a proper posture.
· Vary your work activities. Try to organize your work so that you do not have to sit and work for extended periods of time. Try to stand or get up and walk around at regular intervals.
· Keep the area under your desk clear of obstructions and cables or power cords that may interfere with comfortable seating or present a potential trip hazard.
Monitor screen at or below eye level

Wrists relaxed and flat

Monitor and keyboard positioned directly in front of the user
Feet flat on the floor

About your monitor 21

Handling and moving your display
To ensure that the monitor is handled safely when lifting or moving it, observe the following guidelines: · Before moving or lifting the monitor, turn off your computer and the monitor. · Disconnect all cables from the monitor. · Place the monitor in the original box with the original packing materials. · Hold the bottom edge and the side of the monitor firmly without applying
excessive pressure when lifting or moving the monitor.
· When lifting or moving the monitor, ensure that the screen is facing away from you. Do not press on the display area to avoid any scratches or damage.
· When transporting the monitor, avoid any sudden shock or vibration to it. · When lifting or moving the monitor, do not turn the monitor upside down while
holding the stand base or stand riser. It may result in accidental damage to the monitor or cause personal injury.
22 About your monitor

Maintenance guidelines
Cleaning your monitor WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. CAUTION: Read and follow the Safety instructions before cleaning the monitor.
WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list below when unpacking, cleaning, or handling your monitor:
· To clean the Dell monitor screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the Dell monitor screen. CAUTION: Do not use detergents or other chemicals such as benzene, thinner, ammonia, abrasive cleaners, or compressed air. CAUTION: Using chemicals for cleaning may cause changes in the appearance of the monitor, such as color fading, milky film on the monitor, deformation, uneven dark shade, and peeling of screen area.
WARNING: Do not spray the cleaning solution or even water directly on the surface of the monitor. Doing so will allow liquids to accumulate at the bottom of the display panel and corrode the electronics resulting in permanent damage. Instead, apply the cleaning solution or water to a soft cloth and then clean the monitor.
About your monitor 23

NOTE: Monitor damage due to improper cleaning methods and the use of benzene, thinner, ammonia, abrasive cleaners, alcohol, compressed air, detergent of any kind will lead to a Customer Induced Damage (CID). CID is not covered under the standard Dell warranty. · If you notice white powder when you unpack your monitor, wipe it off with a
cloth. · Handle your monitor with care as a dark-colored monitor may get scratched
and show white scuff marks more than a light-colored monitor. · To help maintain the best image quality on your monitor, use a dynamically
changing screen saver and turn off your monitor when not in use.
24 About your monitor

Setting up the monitor
Attaching the stand
NOTE: The stand is not installed at the factory when shipped. NOTE: The following instructions are applicable only for the stand that was shipped with your monitor. If you are attaching a stand that you purchased from any other source, follow the setup instructions that were included with the stand. To attach the monitor stand: 1. Assemble the stand riser to stand base. a. Place the monitor stand base on a stable table top. b. Slide the monitor stand body in the correct direction down onto the stand
base. c. Tighten thumbscrew clockwise till it’s securely fastened.
2. Attach the stand assembly to the monitor. a. Place the monitor on a soft cloth or cushion near the edge of desk. b. Align the stand assembly bracket to the monitor groove. c. Insert the bracket towards monitor until it locks in place. d. Attach VESA cover.
About your monitor 25

Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow the Safety instructions. NOTE: Dell monitors are designed to work optimally with Dell supplied inbox cables. Dell does not guarantee the video quality and performance if non-Dell cables are used.
NOTE: Route the cables through the cable-management slot before connecting them.
NOTE: Do not connect all cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The appearance of the computer may vary.
To connect your monitor to the computer:

1. Turn off your computer and disconnect the power cable. 2. Connect the VGA cable or HDMI cable from your monitor to the computer.

Connecting the VGA/HDMI Cable

VGA

HDMI

HDMI

VGA

3. Connect the power cables from your computer and monitor into a wall outlet.

1

2

26 About your monitor

Organizing cables
Use cable management clip on stand assembly to route the cables connected to your monitor.
4. Turn on the Monitor.
About your monitor 27

Securing your monitor using Kensington lock (optional)
The security lock slot is located at the bottom of the monitor. (see Security- lock slot). Secure your monitor to a table using the Kensington security lock. For more information on using the Kensington lock (sold separately), see the documentation that is shipped with the lock.
NOTE: The image is for the purpose of illustration only. The appearance of the lock may vary.
28 About your monitor

Removing the monitor stand
NOTE: To prevent scratches on the LCD screen when removing the stand, ensure that the monitor is placed on a soft surface and handle it carefully. NOTE: The following steps are specifically for removing the stand that is shipped with your monitor. If you are removing a stand that you purchased from any other source, follow the setup instructions that are included with the stand. To remove the stand: 1. Place the monitor on a soft cloth or cushion at the edge of the desk.
2. Using a long screwdriver press the release button.
About your monitor 29

3. While keeping the release button pressedpull the stand out.
To remove the VESA cover
Press the dimple on the VESA cover to release it from the back of the display.
30 About your monitor

Wall mounting (optional)

DELL

E2723HN

Flat Panel Monitor /Monitor Plano Panel /Moniteur écran plat /

Model No. /Modelo /N°de modelo ///: E2723HNc Input Rating /Entrade /Daya Tegangan//Entrada de energía:100-240V 50/60Hz,1.5A

:100-240,1.5,50/60 Consumo de energía en operación: XX.X Wh – X.XXXX /² – X.XX – X.XX

Apparatet må tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag. Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.

Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.

The equipment must be connected to an earthed mains socket-outlet. L’appareil doit être branché sur une prise de courant munie d’une mise à la terre.

Made in China /Fabricado en China/ /Fabriqué en Chine/ /

: www.dell.com/regulatory_compliance Raheen Business Park Limerick Ireland (for EU Only)

XXXXXX-XX

CAN ICES-003(B)/NMB-003(B)

For UK only: Cain Road, Bracknell, RG12 1LF

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

R33037 RoHS

xxxxx

IS 13252 (Part 1)/

ZRU-R1-0E120K4-E-x2x7x2x3HNc

:100V, 1.5 A, 50/60 Hz

XXXX XX

IEC 60950-1

:DELL INC.

:L&T Display Technology(Fujian)Ltd.(for Korea)

080-200-3800

Q40G027N-700-XXA

R-41082465 www.bis.gov.in

1111240523

DELL

E2723HN

: E2723HN :
100-240V 50/60Hz,1.5A

Date of Mfg//: December. 2020

SVC Tag: 1234567 Express Service Code: 123 456 789 0

S/N: CN-012345TV100-96N-001V -A00
Q40G024N-700-XXA

(Screw dimension: M4 x 10 mm).
See the documentation that shipped with the VESA-compatible wall mounting kit.
1. Place the display on a soft cloth or cushion at the edge of the desk. 2. Remove the stand. See Removing the monitor stand. 3. Remove VESA cover. 4. Remove the four screws that secure the display back cover. 5. Install the mounting bracket from the wall mounting kit to the display. 6. To mount the monitor on the wall, see the documentation that shipped with the
wall mounting kit. NOTE: For use only with UL or CSA or GS-listed wall mount bracket with minimum weight/load bearing capacity of 15.2 kg.
NOTE: When using the display, fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Installing must be done by a qualified technician , and please contact your supplier for more information.

About your monitor 31

Using tilt
You can tilt the monitor for the most comfortable viewing angle. NOTE: The stand is not attached when the monitor is shipped from the factory.

21°

32 About your monitor

Operating your monitor
Turning on the monitor
Press the button to turn on the monitor.
Using the control buttons
Use the control buttons at the bottom edge of the monitor to adjust the image being displayed.
1 2 34 5
Operating your monitor 33

Control buttons The following table describes the control buttons:

Control Buttons 1

Description
Use this button to choose from a list of preset modes.

Preset mode

2

For direct access to the Brightness and Contrast

menu.

Brightness/Contrast

3

To launch the On-Screen Display (OSD) menu, or to

Menu

access the list of items / options of a menu item. For more information, see Accessing the OSD menu.

4

To exit or return to the OSD main menu.

Exit

5

To turn the monitor on or off.

Power button (with power-status
light)

Solid white light indicates the monitor is turned on and functioning normally. Blinking white light indicates the monitor is in Standby Mode.

34 Operating your monitor

Using the OSD lock function
You can lock the front-panel control buttons to prevent access to the OSD menu and/or power button.

Use the Lock menu to lock the button(s). 1. Select one of the following options.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Language Transparency Timer Lock Reset Menu

Menu Buttons Power Button Menu + Power buttons Disable

2. The following message appears.

Dell 27 Monitor

Are you sure you want to lock the Power Buttons? To unlock the Buttons, refer to the User’s Guide.

Yes

No

E2723HN
3. Select Yes to lock the buttons. Once locked, pressing any control button will display the lock icon

Operating your monitor 35

Use the front-panel control button to lock the button(s).

1 2 34 5 1. Press and hold Button 4 for four seconds, a menu appears on the screen.
Dell 27 Monitor Select option:

2. Select one of the following options:

Control Buttons 1

Description Select this option to lock OSD menu function.

Menu Buttons lock

2

Use this option to lock power button. This will

prevent the user to turn off the monitor using

Power Button lock the power button.

3

Use this option to lock OSD menu and power

button to turn off the monitor.

Menu and Power Buttons lock

36 Operating your monitor

4

Use this option to run the built-in diagnostics,

see Built-in diagnostics

Built-in Diagnostics

To unlock the button(s).
Press and hold Built-in diagnostics button (button 4) for four seconds until a menu appears on the screen. The following table describes the options to unlock the front-panel control buttons.

Dell 27 Monitor Select Option:

Dell 27 Monitor Select Option:

Dell 27 Monitor Select Option:

Control Buttons 1

Description Select this option to unlock OSD menu function.

Menu Buttons unlock

2

Use this option to unlock power button to turn

off the monitor.

Power Button unlock

3

Use this option to unlock OSD menu and power

button.

Menu and Power Buttons unlock

4

Use this option to run the built-in diagnostics,

see Built-in diagnostics

Built-in Diagnostics

Operating your monitor 37

OSD controls Use the buttons on the bottom edge of the monitor to adjust the image settings.

Control Buttons 1
Up 2
Down 3
OK 4
Back

1 2 34
Description Use the Up button to increase values or move up in a menu.
Use the Down button to decrease values or move down in a menu.
Use the OK button to confirm your selection in a menu.
Use the Back button to go back to the previous menu.

38 Operating your monitor

Using the On-Screen Display (OSD) menu
Accessing the OSD menu NOTE: Any changes you make are automatically saved when you move to another menu, exit the OSD menu, or wait for the OSD menu to close automatically.
1. Press the button to display the OSD main menu.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

75% 75%

2. Press the and buttons to move between the setting options. As you move from one icon to another, the option is highlighted.
3. Press the or or button once to activate the highlighted option.
4. Press and button to select the desired parameter.
5. Press and then use the and buttons, according to the indicators on the menu, to make your changes.
6. Select the to return to previous menu or to accept and return to previous menu.

Operating your monitor 39

Icon

Menu and

Description

Submenus

Brightness/ Use this option to control the brightness or contrast setContrast tings.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

75% 75%

Brightness

Brightness adjusts the luminance of the backlight.
Press the button to increase the brightness and press the button to decrease the brightness (min. 0 / max. 100).

Contrast

Adjust the brightness first, and then adjust the contrast only if further adjustment is necessary.
Press the button to increase the contrast and press the button to decrease the contrast (min. 0 / max. 100).
The contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.

40 Operating your monitor

Auto Adjust Use this option to activate automatic setup and adjust menu.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Press to adjust the screen automatically

The following dialog appears on a black screen as the monitor self-adjusts to the current input:
Auto Adjust allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Display.
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables. This option is only available when you are using the analog(VGA) connector.

Operating your monitor 41

Input Source Use the input source menu to select between the different video signals that may be connected to your monitor.
One VGA, one HDMI

Dell 27 Monitor

Brightness / Contrast

VGA

Auto Adjust

HDMI

Input Source

Auto Select

On

Color

Reset Input Source

Off

Display

Menu

Personalize

Others

VGA

Push to select the VGA input source when using

HDMI

VGA connector. Push to select the HDMI input source when using

HDMI connector. Auto Select Select Auto Select to scan for available input signals.

Reset Input Select this option to restore default Input Source. Source Color Use color to adjust the color setting mode.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Present Mode Input Color Format Reset Color

Standard > RGB

Preset Modes

When you select preset modes, you can choose Standard, ComfortView, Warm, Cool, or Custom color from the list.
· Standard: Loads the monitor’s default color settings. This is the default preset mode.
· ComfortView: Decreases the level of blue light emitted from the screen to make viewing more comfortable for your eyes.

42 Operating your monitor

Preset Modes

NOTE: To reduce the risk of eye strain and neck/ arm/back/shoulders pain from using the monitor for long periods of time,we suggest that you:
· Set the screen about 20~28 inches (50~70 cm) from your eyes.
· Blink frequently to moisten or lubricate your eyes.
· Take regular 20-minute breaks every two hours.
· Look away from your monitor and gaze at a distant object at 20 feet away for at least 20 seconds during the breaks.
· Perform stretches to relieve tension in the neck/arm/ back/shoulders during the breaks.
· Warm: Increases the color temperature. The screen appears warmer with a red/yellow tint.
· Cool: Decreases the color temperature. The screen appears cooler with a blue tint.
· Custom Color: Allows you to manually adjust the color settings. Press the and buttons to adjust the three colors (R, G, B) values and create your own preset color mode.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Preset Modes Input Color Format Reset Color

Standard ComfortView Warm Cool Custom Color

Operating your monitor 43

Input Color Format

Allows you to set the video input mode to:
· RGB: Select this option if your monitor is connected to a computer or a media player that supports RGB output.
· YCbCr: Select this option if your media player supports only YCbCr output.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Preset Modes Input Color Format Reset Color

RGB YCbCr

Reset Color Resets your monitor’s color settings to the factory default. Display Use the display to adjust image.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Aspect Ratio Horizontal Position Vertical Position Sharpness Pixel Clock Phase Response Time Reset Display

16 : 9 4 : 3 5 : 4

Aspect Ratio Adjusts the image ratio to 16:9, 4:3 and 5:4.

Horizontal Use or to move image left and right.

Position Minimum is ‘0’ (-). Maximum is ‘100’ (+).

(VGA input only)

Vertical Use or to move image up and down.

Position Minimum is ‘0’ (-). Maximum is ‘100’ (+).

(VGA input only)
Sharpness

This feature can make the image look sharper or softer. Use or to adjust the sharpness from 0 to 100.

44 Operating your monitor

Pixel Clock (VGA input
only)
Phase (VGA input
only)
Response Time Reset
Display Menu

The Pixel Clock feature enables you to adjust image quality on your monitor to your preference. Use or buttons to adjust for best image quality. If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again. Allow you to select between Normal (8 ms), Fast(5 ms).
Select this option to restore default display settings.
Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen and so on.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Language Transparency Timer Lock Reset Menu

English 20 20 s Disable

Language
Transparency

Language options set the OSD display to one of the eight languages (English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified Chinese, or Japanese).
Select this option to change the menu transparency by pressing the and buttons from 0 to 100.

Timer

OSD hold time: sets the length of time the OSD will remain active after the last time you pressed a button.
Use or to adjust the slider in 1 second increments, from 5 to 60 seconds.

Operating your monitor 45

Lock

Controls user access to adjustments. The buttons are locked.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Language Transparency Timer Lock Reset Menu

Menu Buttons Power Button Menu + Power buttons Disable

· Menu Buttons: Through OSD to lock the Menu buttons. · Power Button: Through OSD to lock the Power button. · Menu + Power Buttons: Through OSD to lock both the
Menu and Power buttons.
· Disable: Press and hold the button on the left of the power button for 4 second.
Reset Menu Reset all OSD settings to the factory preset values.

46 Operating your monitor

Personalize

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Shorout Key 1 Shorout Key 2 Power Button LED Reset Personalization

Preset Modes Brightness/Contrast On in On Mode

Shortcut Key 1
Shortcut Key 2
Power Button LED

Select one of the following: Preset
Modes, Brightness/Contrast, Auto Adjust, Input Source, Aspect Ratio, to set the shortcut key 1. Allow you to select one of the following: Preset Modes,
Brightness/Contrast, Auto Adjust, Input Source, Aspect Ratio, to set the shortcut key 2. Allows you to set the power LED indicator On in On Mode or Off in On Mode to save energy.

Reset Per- Restores shortcut keys to factory defaults. sonalization

Others

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Display Info DDC/CI LCD Conditioning Service Tag Reset Others Factory Reset

On ABCDEFG ENERGY STAR®

Display Info Press to display the information about the display.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Display Info DDC/CI LCD Conditioning Service Tag Reset Others Factory Reset

Model: Dell E2723HN Input Source: VGA Current: 1920×1080, 60Hz

Operating your monitor 47

DDC/CI

DDC/CI (Display Data Channel/Command Interface) allows you to adjust the monitor settings using software on your computer.Select Off to turn of this feature.
Enable this feature for best user experience and optimum
performance of your monitor.

Dell 27 Monitor

Brightness / Contrast

Display Info

Auto Adjust

DDC/CI

On

Input Source

LCD Conditioning

Off

Color

Service Tag

Display

Reset Others

Menu

Factory Reset

Personalize

Others

LCD Conditioning

Helps to reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. To start LCD conditioning, select on.

Dell 27 Monitor

Brightness / Contrast Auto Adjust

Display Info DDC/CI

Input Source

LCD Conditioning

On

Color

Service Tag

Off

Display

Reset Others

Menu

Factory Reset

Personalize

Others

48 Operating your monitor

Service Tag Display the Service Tag number of the monitor.

Dell 27 Monitor
Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others

Display Info DDC/CI LCD Conditioning Service Tag Reset Others Factory Reset

On ABCDEFG ENERGY STAR®

Reset Others Reset all settings under the Others setting
menu to the factory default. Factory Reset all settings to the factory default. These are also Reset the settings for ENERGY STAR® tests.

Operating your monitor 49

OSD warning messages

Before the DDC/CI function is disabled, the following message is displayed.
Dell 27 Monitor

The function of adjusting display setting using PC application will be disabled. Do you wish to disable DDC/CI function?

Yes

No

E2723HN

When the monitor enters Standby Mode, the following message appears.

Dell P2418HZ
Dell 27 Monitor
Going into Standby mode…
E2723HN
or
Dell P2418HZ
Dell 27 Monitor
Going into Standby mode…
E2723HN

50 Operating your monitor

If VGA or HDMI cable is not connected, a foating dialog box as shown below appears. The monitor will enter Standby Mode after 4 minutes if left at this state.
Dell P2418HZ
Dell 27 Monitor
? No HDMI Cable The display will go into Standby mode in 4 minutes.

www.dell.com/E2723HN

E2723HN

or

Dell P2418HZ
Dell 27 Monitor

? No VGA Cable The display will go into Standby mode in 4 minutes.

www.dell.com/E2723HN

E2723HN

See Troubleshooting Troubleshooting for more information.

Operating your monitor 51

Setting the maximum resolution
NOTE: The steps may vary slightly depending on the version of Windows you have. To set the maximum resolution for the monitor: In Windows 8.1: 1. For Windows 8.1, select the Desktop tile to switch toclassic desktop. 2. Right- click on the desktop and click Screen Resolution. 3. If you have more than one monitor connected, ensure that you select E2723HN. 4. Click the Screen Resolution dropdown list and select 1920 x 1080. 5. Click OK. In Windows® 10 and Windows 11: 1. Right-click on the desktop and click Display settings. 2. If you have more than one monitor connected, ensure to select E2723HN. 3. Click the Display Resolution dropdown list and select 1920 x 1080. 4. Click Keep changes. If you do not see 1920 x 1080 as an option, you must update your graphics driver to the latest version. Depending on your computer, complete one of the following procedures: If you have a Dell desktop or portable computer: · Go to https://www.dell.com/support, enter your service tag, and download the latest driver for your graphics card. If you are using a non-Dell computer (laptop or desktop): · Go to the support site for your computer and download the latest graphic drivers. · Go to your graphics card website and download the latest graphic drivers.
52 Operating your monitor

Troubleshooting
WARNING: Before you begin any of the procedures in this section, follow the Safety instructions.
Self-Test
Your monitor provides a self-test feature that allows you to check if your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor. 2. Disconnect all video cables from the monitor. This way, the computer doesn’t
have to be involved. 3. Turn on the monitor. If the monitor is working correctly, it detects that there is no signal and one of the following message appears. While in self-test mode, the power LED remains white.
Dell P2418HZ
Dell 27 Monitor
? No VGA Cable The display will go into Standby mode in 4 minutes.

www.dell.com/E2723HN

E2723HN

or
Dell P2418HZ
Dell 27 Monitor

? No HDMI Cable The display will go into Standby mode in 4 minutes.

www.dell.com/E2723HN

E2723HN

NOTE: This box also appears during normal system operation, if the video cable is disconnected or damaged.

Troubleshooting 53

4. Turn Off your monitor and reconnect the video cable; then turn on your computer and the monitor.
If your monitor remains dark after you reconnect the cables, check your video controller and computer.
Built-in diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, or with your computer and video card.
NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode.

1234

5

To run the built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the screen).
2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode.
3. Press and hold the Exit button (button 4) for four seconds to enter the OSD lock/unlock menu.

Dell 27 Monitor Select option:

54 Troubleshooting

Dell 27 Monitor Select option:
4. Select the icon to run the built-in diagnostics. 5. Carefully inspect the screen for abnormalities. 6. Press the Up button (button 1) on the back cover again. The color of the
screen changes to grey. 7. Inspect the display for any abnormalties. 8. Repeat step 6 and 7 to inspect the display in red, green, blue, black, white and
text pattern screens. The test is complete when the text pattern screen appears. To exit, press the Up button (button 1) again. If you do not detect any screen abnormalties upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.
Troubleshooting 55

Common problems
The following table contains general information about common monitor problems you might encounter and the possible solutions:

Common Symptoms
No Video/Power LED off

Possible Solutions
Ensure that the video cable connecting the monitor and the computer is properly connected and secure.

· Verify that the power outlet is functioning properly using any other electrical equipment.

· Ensure that the power button is pressed.

· Ensure that the correct input source is selected via the Input Source menu.

No Video/Power LED on

· Increase brightness and contrast controls using the OSD. · Perform monitor self-test feature check.

· Check for bent or broken pins in the video cable connector.

· Run the built-in diagnostics.

· Ensure that the correct input source is selected via the Input Source menu.

Poor Focus

· Eliminate video extension cables.

· Reset the monitor to Factory Settings (Factory Reset).

· Change the video resolution to the correct aspect ratio.

Shaky/Jittery Video · Reset the monitor to Factory Settings (Factory Reset).

· Check environmental factors.

· Relocate the monitor and test in another room.

Missing Pixels

· Cycle power On-Off.

· Pixel that is permanently Off is a natural defect that can occur in LCD technology.

· For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: www.dell.com/pixelguidelines.

56 Troubleshooting

Stuck-on Pixels
Brightness Problems Geometric Distortion Horizontal/Vertical Lines
Synchronization Problems
Safety Related Issues Intermittent Problems
Missing Color

· Cycle power On-Off.
· Pixel that is permanently off is a natural defect that can occur in LCD technology.
· For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: www.dell.com/pixelguidelines.
· Reset the monitor to Factory Settings (Factory Reset).
· Adjust brightness & contrast controls via OSD. · Reset the monitor to Factory Settings (Factory Reset).
· Adjust horizontal & vertical controls via OSD. · Reset the monitor to Factory Settings (Factory Reset).
· Perform monitor self-test feature check and determine if these lines are also in self-test mode.
· Check for bent or broken pins in the video cable connector.
· Run the built-in diagnostics. · Reset the monitor to Factory Settings (Factory Reset).
· Perform monitor self-test feature check to determine if the scrambled screen appears in self-test mode.
· Check for bent or broken pins in the video cable connector.
· Restart the computer in the safe mode. · Do not perform any troubleshooting steps.
· Contact Dell immediately. · Ensure that the video cable connecting the monitor to the
computer is connected properly and is secure.
· Reset the monitor to Factory Settings (Factory Reset).
· Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.
· Perform monitor self-test feature check.
· Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
· Check for bent or broken pins in the video cable connector.

Troubleshooting 57

Wrong Color
Image retention from a static image left on the monitor for a long period of time Video Ghosting or Overshooting

· Try different Preset Modes in Color settings OSD. Adjust R/G/B value in Custom Color in Color settings OSD.
· Change the Input Color Format to RGB or YCbCr/ YPbPr in the Color settings OSD.
· Run the built-in diagnostics. · Set the screen to turn off after a few minutes of screen
idle time. These can be adjusted in Windows Power Options or Mac Energy Saver setting. · Alternatively, use a dynamically changing screensaver.
· Change the Response Time in the Display OSD to Normal or Fast depending on your application and usage.

Product-specific problems

Specific Symptoms

Possible Solutions

Screen image is too · Check the Aspect Ratio setting in the Display settings

small

OSD.

· Reset the monitor to Factory Settings (Factory Reset).

Cannot adjust the · Turn Off the monitor, unplug the power cord, plug it back,

monitor with the

and then turn On the monitor.

buttons on the

· Check if the OSD menu is locked. If yes, press and hold the

bottom of the panel Exit button (button 4) for four seconds to unlock.

No Input Signal · Check the signal source. Ensure the computer is not in

when user controls Standby Mode by moving the mouse or pressing any key

are pressed

on the keyboard.

· Check if the video cable is plugged in properly. Disconnect and reconnect the video cable if necessary.

· Reset the computer or video player.

The picture does not fill the entire screen

· Due to different video formats (aspect ratio) of DVDs, the monitor may display in full screen.
· Run the built-in diagnostics.

58 Troubleshooting

Regulatory information
FCC notices (U.S. Only) and other regulatory information
For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com/regulatory_compliance.
EU product database for energy label and product information sheet
E2723HN : https://eprel.ec.europa.eu/qr/1004223
Contacting Dell
To contact Dell for sales, technical support, or customer service issues, see www. dell.com/contactdell.
NOTE: Availability varies by country and product, and some services may not be available in your country. NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.
Regulatory information 59

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals