eWent EW7019 USB 3.2 Gen1 IDE SATA Adapter User Guide
- June 8, 2024
- ewent
Table of Contents
eWent EW7019 USB 3.2 Gen1 IDE SATA Adapter
For PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and shall be easily accessible.
IDE
Connection
- Connect the power cable to the power converter.
- Connect the IDE power cable to the power converter.
- Connect the other side of the IDE power cable to the power connection of the IDE disk.
- Connect the EW7019 to the IDE hard disk
- Connect the USB 3.2 Gen1 cable to a free USB port of your computer.
- Connect the power adapter to a wall outlet.
SATA
Connection
- Connect the power cable to the power converter.
- Connect the SATA power cable to the power converter.
- Connect the other end of the SATA power cable to the corresponding SATA connector of the hard disk.
- Connect the SATA cable to the corresponding SATA connector of the SATA hard disk
- Connect the other side of the SATA cable to the SATA connection of the EW7019.
- Connect the USB 3.2 Gen1 cable to a free USB port of the computer.
- Connect the power supply to a wall outlet.
Warranty
- 5 Years Warranty
For service, manuals, firmware updates, or support visit www.ewentonline.com Multilingual manual.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>