OMCAN FP-CN-0008 8-Liter Bowl Cutter Instruction Manual
- June 4, 2024
- OMCAN
Table of Contents
OMCAN FP-CN-0008 8-Liter Bowl Cutter
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no
damage is evident on the external packaging, open carton to ensure all ordered
items are within the box, and there is no concealed damage to the machine. If
the package has suffered rough handling, bumps or damage (visible or
concealed), please note it on the bill of lading before accepting the delivery
and contact Omcan within 24 hours, so we may initiate a claim with the
carrier. A detailed report on the extent of the damage caused to the machine
must be filled out within three days, from the delivery date shown in the
shipping documents. Omcan has no recourse for damaged products that were
shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all
operation and safety instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost
importance to save these instructions for future reference. Also save the
original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
Safety and Warranty
WARNING
PLEASE READ THE USER MANUAL CAREFULLY BEFORE OPERATING THE MACHINE
- New user or repairing this product must be performed by experts or qualified person or those who have gotten the license of installation, or those who are authorized by the manufacturer.
- When installation or maintenance, please obey the following instructions carefully to ensure the safety use of this appliance.
- Please keep this instruction manual for future reference, or hand it to next user.
- Put off the package to make sure none of the parts is missing or damaged. If there is any doubt about the product, please do not use it, and consult it to the experts.
- Keep the packing material out of reach of the children to avoid accident (especially the plastic bag, screw, etc).
- This appliance could be only operated by a person who is familiar with the unit.
- When not using the appliance or the operator is absent, please turn off the unit to avoid any accidental injury or damage.
- When it needs to be repaired, please ask for expert, and use the original fitted spare part. It will be dangerous if the above requirements are not being followed.
- This appliance is just for commercial using, not for any other use. Otherwise, it may be dangerous.
- Do not rinse the equipment with water directly.
- Clean the surface of stainless steel periodically with the appropriate methods to prevent any damage brought by oxidization or any other chemical interference.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.
WARRANTY
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use. Please see https://omcan.com/disclaimer for complete info
WARNING:
The packaging components are classified as normal solid urban waste and can
therefore be disposed of without difficulty.
In any case, for suitable recycling, we suggest disposing of the products
separately (differentiated waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Technical Specifications
| Model | FP-CN-0008 | FP-CN-0008-B |
|---|---|---|
| Power | 1 HP | |
| Capacity | 8 L / 8.5 QT | |
| Bowl Dimensions (Dia. x H) | 18” x 4” / 457 x 102mm | |
| Production per hour | 264.6 lbs. / 120 kgs. | |
| RPM | 1400 | |
| Electrical | 110V / 60Hz / 1 | 220V / 60Hz / 1 |
| Weight | 198 lbs. / 89.8 kgs. | |
| Packaging Weight | 220 lbs. / 99.8 kgs. | |
| Dimensions | 21.7” x 31.5” x 21.7” / 550 x 800 x 550mm | |
| Packaging Dimensions | 34” x 25” x 26” / 864 x 635 x 660mm | |
| Item Number | 16998 | 16999 |
Operation
Before use, check that power supply corresponds to that required by the machine, and the machine must be grounded. Check the fixed nut of blade and tighten it. Cut meat into pieces, suiting the feed-size. Feed the pieces in order, and keep the work smoothly. After use, disconnect from the electricity supply, discharge the top cover, and wash blades, as to avoid bacteria growth. Do not flow water into the bearing and motor. Lubricate the bearings and gears occasionally.
Maintenance
- Always turn the machine off before proceeding with its cleaning. Disconnect the machine from the main power source and deactivate power on breaker panel. The machine should be cleaned daily, both before and after its use. Given the easy access to all its components, the cutter/chopper is simple to clean using just warm water and a mild detergent.
- Never use bleach nor any abrasive cleaners which could damage the stainless steel or other materials.
- Never use steam or a high pressure jet of water to clean the cutter/chopper; avoid getting water in the interior of the machine, especially through or around any electrical components.
- After every operating session, use a brush to carefully clean the bowl, the knife shaft, and the interior part of the knife lid, the hinge of the lid, and the lid holding screws if necessary.
- Do not put your hands near the cutting edge of the knives without using adequate protection (gloves made of reinforced metal fiber).
- The knife head can be removed in one piece in order to clean it under running water; take care not to drop the knife head assemblage on the floor or on your feet.
- Do not wash the knives in water hotter than 60°C or colder than 10°C. Do not wash the knives immediately after using the machine since an abrupt change in temperature could cause internal micro fissures or deformations.
- It is extremely important to keep the surfaces holding the knives and separation rings clean to avoid buildup of mixture residues. Such a build-up could create areas which bear more pressure than others, possibly causing micro fissures that could damage or break the knife.
- To clean the machine manually, always use appropriate safety equipment (latex gloves, plastic aprons).
- Always rinse the machine thoroughly after using any kind of detergent or disinfectant and be sure to follow the manufacturers’ instructions when using cleaning products.
Parts Breakdown
Model FP-CN-0008 16998/ Model FP-CN-0008-B 16999
Item No.| Description| Position| Item No.|
Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
43031| Food Cover for 16998| 1, 49| AE560| Bowl Support for 16998| 18| AE565|
Lock for 16998| 36
AE546| Pressure Board for 16998| 2| AE561| Body for 16998| 19| AE566| Back
Panel for 16998| 37
AE547| Handle I for 16998| 3| 76858| Foot for 16998| 20| AE567| Bearing 6206
for 16998| 38
AE548| Cover Shaft II for 16998| 4| AE562| Worm-Wheel Cover for 16998| 21|
AE568| Sleeve for 16998| 39
AE549| Cover Support for 16998| 5| 76895| Worm-Wheel Cover for 16998| 22|
AE569| Tension Pulley for 16998| 40
AE550| Handle II for 16998| 6| 76892| Bearing 202 for 16998| 23| 78639|
Tension Seat for 16998| 41
AE551| Left Screw M16x1.5 for 16998| 7| 76893| Bearing Cover for 16998| 24|
78640| Tension Pulley Support for 16998| 42
AE552| Cutter Washer for 16998| 8| AE563| Worm Drive Shaft for 16998| 25|
AE570| Safety Switch for 16998| 43
AE553| Cutter for 16998| 9| 76871| Installing Support II for 16998| 26| AE571|
Safety Switch Panel for 16998| 44
AE554| Cutter Insulated Ring for 16998| 10| 76872| Hinge for 16998| 27| AE572|
Contactor for 16998| 45
AE555| Washer for 16998| 11| 76890| Bearing Seat for 16998| 29| AE573|
Protection Fixed Plate for 16998| 46
76865| Blade Shaft for 16998| 12| AE564| Body Cover for 16998| 30| AE574| Heat
Relay for 16998| 47
76863| Bearing Cover for 16998| 13| 76889| VA Belt L 750 for 16998| 31| AE575|
Belt Pulley for 16998| 48
AE556| Oil Seal B32x52x8 for 16998| 14| 76884| Belt Pulley for 16998| 32|
AE576| Cover Shaft I for 16998| 50
AE557| Bearing 6206 for 16998| 15| 76877| Motor for 16998| 33| AE577| Cover
Fixed Panel for 16998| 51
AE558| Bearing 6205 for 16998| 16, 28| 76878| Installing Panel for 16998| 34|
| |
AE559| Bowl for 16998| 17| 76876| Installing Support I for 16998| 35| | |
__| __| | | | | |
Item No.
| __
Description
| __
Position
| __
Item No.
| __
Description
| __
Position
| __
Item No.
| __
Description
| __
Position
43031| Food Cover for 16999| 1, 49| AE560| Bowl Support for 16999| 18| AE565|
Lock for 16999| 36
AE546| Pressure Board for 16999| 2| AE561| Body for 16999| 19| AE566| Back
Panel for 16999| 37
AE547| Handle I for 16999| 3| 76858| Foot for 16999| 20| AE567| Bearing 6206
for 16999| 38
AE548| Cover Shaft II for 16999| 4| AE562| Worm-Wheel Cover for 16999| 21|
AE568| Sleeve for 16999| 39
AE549| Cover Support for 16999| 5| 76895| Worm-Wheel Cover for 16999| 22|
AE569| Tension Pulley for 16999| 40
AE550| Handle II for 16999| 6| 76892| Bearing 202 for 16999| 23| 78639|
Tension Seat for 16999| 41
AE551| Left Screw M16x1.5 for 16999| 7| 76893| Bearing Cover for 16999| 24|
78640| Tension Pulley Support for 16999| 42
AE552| Cutter Washer for 16999| 8| AE563| Worm Drive Shaft for 16999| 25|
AE570| Safety Switch for 16999| 43
AE553| Cutter for 16999| 9| 76871| Installing Support II for 16999| 26| AE571|
Safety Switch Panel for 16999| 44
AE554| Cutter Insulated Ring for 16999| 10| 76872| Hinge for 16999| 27| AE572|
Contactor for 16999| 45
AE555| Washer for 16999| 11| 76890| Bearing Seat for 16999| 29| AE573|
Protection Fixed Plate for 16999| 46
76865| Blade Shaft for 16999| 12| AE564| Body Cover for 16999| 30| AE574| Heat
Relay for 16999| 47
76863| Bearing Cover for 16999| 13| 76889| VA Belt L 750 for 16999| 31| AE575|
Belt Pulley for 16999| 48
AE556| Oil Seal B32x52x8 for 16999| 14| 76884| Belt Pulley for 16999| 32|
AE576| Cover Shaft I for 16999| 50
AE557| Bearing 6206 for 16999| 15| 64198| Motor for 16999| 33| AE577| Cover
Fixed Panel for 16999| 51
AE558| Bearing 6205 for 16999| 16, 28| 76878| Installing Panel for 16999| 34|
| |
AE559| Bowl for 16999| 17| 76876| Installing Support I for 16999| 35| | |
Electrical Schematics
Model FP-CN-0008 16998
Model FP-CN-0008-B 16999
Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting:
For mailing in Canada
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
For mailing in the US
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 5,000 globally sourced products.
- Toll Free: 1-800-465-0234
- Fax: 905-607-0234
- Email: [email protected]
- www.omcan.com