OMCAN 46659 Cargo Bikes Instruction Manual

46659 Cargo Bikes
Instruction Manual

Cargo Bikes
Items 46659, 46660, 47411
Assembly Instructions
Item 46659 / Item 46660 / Item 47411

General Information

Oman Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Oman and Oman Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The  product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Oman shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Oman within 24 hours, so we may initiate a claim with the carrier. A detailed  report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Oman has no recourse for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety instructions.
Oman would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the equipment if servicing or returning of the machine is required.

Safety and Warranty

6 MONTHS PARTS AND LABOUR WARRANTY
Within the warranty period, contact Oman Inc. at 1-800-465-0234 to schedule an Oman authorized service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.

Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

Installation

CONNECTING FRONT FRAME AND REAR FRAME

• First insert the rear frame front axle into the front frame hole and put the bearing between them.
  Note: Dab grease where the Bearing is assembled.

• After adjusting the position, screw the nut for fixing.

• Assemble the damper on the two sides of the frame as shown in Figure 2.

SECOND VERSION AS SHOWN IN FIGURE 3 AND FIGURE 4

• Space all the parts as shown in Figure 3, and lock it.
  Note: keep the knighthead and bottom border on the same level.

ASSEMBLE THE WHEEL SETS
If disc brakes are used:

• Assemble the fenders on the front frame as shown in Figure 3 and fix the fender clip.
• Put the front wheels on the two sides of front frame (bottom border) and use the safety hook and lock nut for fixing.
• Assemble the disc brake on the brake fixing plate and lock it with screws and spacer as shown in Figure 4. (Figure 5 is finished).
  Note: Disc brake spacer can be chosen use or not use according to the distance between disc brake disc and disc brake plate.

If roller brakes are used:

• Assemble the fenders on bottom border as shown in Figure 3 and fix the fender clip. And then attach the roller brake onto the wheel hub with lock nut for fixing.
• Put the front wheels on the two sides of front frame (bottom border) and fixing the roller brake end at fixing space. Adjust the brake and lock it with brake lock nut.

To assemble the imitated roller brake:

• Assemble the fenders on bottom border as shown in Figure 5 and fix the fender clip. And then attach the imitated roller brake onto the wheel hub with lock nut for fixing as shown in Figure 9. Put the front wheels on the two sides of  front frame (bottom border) and fixing the imitated roller brake end at fixing space. Adjust the brake and lock it with brake lock nut.

To assemble the V brake:

• Assemble the fenders on bottom border as shown in Figure 5 and fix the fender clip. Attach the V brake onto the V brake seat and lock it with V brake fixing bolt, adjust the brake cable and fixing it.
  To assemble the drum brake:

• Assemble the fenders on bottom border as shown in Figure 5 and fix the fender clip. Put the two front wheels onto both sides of bottom border and fix the end of the drum brake on the drum brake fixing space, lock it with the lock nut and safety hook. Adjust the brake cable and lock it shown in Figure 11.

ASSEMBLE THE BOX

• Assemble the front box onto the front frame (bottom border) as shown in Figure 12 and Figure 9 with screw fixing. Fixing the safety belt and front reflector on the box.

ASSEMBLE THE HANDLEBAR
Normally use two kinds of handlebar according to customer’s request.
U- type handle bar assembly:

• Assemble the handle bar as below shown in Figure 15, adjust the height and lock it.

Standard handle bar assembly:

• Assemble the handle bar as below shown in Figure 16 and Figure 17, adjust the height and lock it.

SADDLE ASSEMBLY

• As shown in Figure 18, Insert the seat post into the saddle and lock it, and then put another side of seat post insert into frame seat tube and fixing the seat post lock.
  Note: Safety line must be under the seat post lock.

Figure Drawings

Warranty Registration

Thank you for purchasing an Oman product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: https://omcan.com/warranty-registration/

OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5| OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305

or email to: service@omcan.com

Purchaser’s Information
Name:…………………………………………………………….
Address:………………………………………………………….
City:……………………………………………………………….
Province or State:…………………………………………..
Postal or Zip:…………………………………………………
Country:………………………………………………………..
Dealer from which Purchased:……………………….
Dealer City:………………………………………………….
Dealer Province or State:………………………………..
Invoice:………………………………………………………..
Model Name:………………………………………………
Model Number:…………………………………………….
Machine Description:……………………………………
Date of Purchase (MM/DD/YYYY):………………
Would you like to extend the warranty? Yes □ No

Company Name:………………………………………
Telephone:…………………………………………..
Email Address:…………………………………..
Type of Company:………………………………
Restaurant
Bakery
Deli
Butcher
Supermarket
Caterer
Institution (specify):……………………………….
Other (specify):………………………………………..
Serial Number:………………………………………..
Date of Installation (MM/DD/YYYY):………

Thank you for choosing Oman

Since 1951 Oman has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 6,500 globally sourced products.

http://www.omcan.com

References

• Omcan
• Disclaimer – Omcan
• Warranty Registration – Omcan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>