Hamilton Beach 58870 Professional Quiet Shield Blender Instruction Manual

Hamilton Beach 58870 Professional Quiet Shield Blender

Read before use

In an effort to reduce paper waste, Hamilton Beach Brands, Inc., has reduced the size of this Use and Care guide and made it available online. We believe strongly in doing our part to help care for the environment. To view Use and Care guides, recipes, and tips, please visit:

• hamiltonbeach.com
• USA: 1.800.851.8900
• hamiltonbeach.com.mx
• USA: 1.800.851.8900
• Canada: 1.800.267.2826
• México: 01.800.71.16.100

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

1. Read all instructions.
2. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they are closely supervised and instructed concerning the use of the appliance by a person responsible for their safety.
3. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
4. To protect against the risk of electrical shock, do not put a cord, plug, base, or motor in water or other liquid.
5. Unplug the cord from the outlet when not in use, before putting on or taking off parts, and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate any appliance with a damaged supply cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Supply cord replacement and repairs must be conducted by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. Call the provided customer service number for information on examination, repair, or adjustment.
8. The use of attachments, including canning jars, not recommended or sold by the appliance manufacturer may cause a risk of injury to persons.
9. Do not use outdoors.
10. Do not let the cord hang over the edge of the table or counter or touch hot surfaces, including the stove.
11. Do not place on or near a hot gas or electric burner, or in a heated oven.
12. Keep hands and utensils out of the jar and away from the cutting blade, while blending or chopping food, to reduce the risk of severe personal injury and/or damage to the blender or available attachments (attachments may not be provided with blender). A rubber spatula may be used but must be used only when the blender is not running.
13. Blades are sharp; handle carefully—especially when assembling, disassembling, or cleaning inside the blender jar.
14. To reduce the risk of injury, never place the cutting blade assembly on the base without the jar properly attached.
15. Do not use a broken, chipped, or cracked blender jar.
16. Do not use broken, cracked, or loose cutting blade assembly.
17. Always operate the blender with the lid and filler cap in place. Remove the filler cap only for adding ingredients or to insert the tamper.
18. When blending hot liquids or ingredients, remove filler cap from the lid. Use caution: spray or excess steaming may cause scalding and burns. Do not exceed the 2-cup (473-ml) level. Always begin processing on the lowest speed. Keep hands and other exposed skin from the lid opening to prevent possible burns.
19. Ensure the cutter assembly is tight and secure to the jar. Injury can result if moving blades accidentally become exposed.
20. If the jar should twist or rotate when the motor is switched ON, switch OFF ( ) immediately and tighten the jar in the collar or on the blender base.
21. Do not leave the blender unattended while it is operating.
22. Before plugging the cord into a wall outlet, turn OFF ( ) the appliance. To disconnect the cord, turn the control to OFF ( ). Then remove the plug from the wall outlet.
23. Do not use the appliance for other than the intended purpose.

SAVE THESE INSTRUCTIONS!

Other Consumer Safety Information

• This appliance is intended for household use only. Use for food or liquids only.
• WARNING Electrical Shock Hazard: This appliance is provided with a grounded (3-prong) plug to reduce the risk of electric shock. The plug fits only one way into a grounded outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or by using an adapter. If the plug does not fit into the outlet, have an electrician replace the outlet.
• The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the appliance. The extension cord must be a grounding-type, 3-wire cord. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over.
• If the cutting blade assembly locks and does not move, it will damage the motor. Do not use. Call the customer care center for information.
• Do not place a blender jar in the freezer filled with food or liquid. This can result in damage to the cutting blade assembly, jar, and blender, and possibly result in personal injury.
• NOTE: This machine is equipped with motor overload protection. If the motor stops during operation due to overheating, unplug it and allow it to cool down for approximately 15 minutes. Plug the machine back in to resume normal operation.

Wattage/Peak Power Information

• The wattage/ampere rating of the blender is determined by an Underwriters Laboratory test and is based on available cutting blade assembly, jar combinations, and attachments that may not be provided with your unit, but are available as replacement parts. This is a measure of input wattage/amperes after 30 seconds of operation. The blender as provided may draw significantly less power.
• Peak power is the measure of the motor wattage during the first seconds of operation. This is when a blender requires the most power to crush ice, frozen fruit, etc. This is a better measure of what a blender motor can consume when power is needed most.

Parts and Features

• Quiet Shield: The quiet shield reduces the amount of noise from your blender. When placed over the blender jar or the personal blender jar, it muffles the sound that your blender produces.
• Filler-Cap: The filler-cap has markings for easy measuring, to make fine dressings and marinades. When the filler cap is removed, ingredients can be added or the tamper may be inserted into the lid.
• Lid: The lid is easy to put on, take off, and clean. Always use the lid and the filler cap when the machine is in operation.
• Tamper: The tamper mixes thick or frozen mixtures that cannot be processed with regular blending. It prevents air pockets from forming and is a handy tool when making nut butter.
• Blender Jar: The durable jar is clearly marked with ounces, cups, and milliliters.
• Personal Blender Jar: The personal blender jar makes it easier to make beverages on the go.
• Twist-On Lid: When done blending in your personal blender jar, remove the collar and cutting blade assembly and add the twist-on lid.
• Cutting Blade Assembly: The cutting blade assembly is permanently installed in the blender jar.
• Jar Pad: Simply lift to remove the rubber pad for easy cleaning.
• Control Buttons: Two buttons are located on top of the base. Use START/STOP with any setting. Use PULSE with any variable speed.
• Control Knob: Rotate the knob to turn the blender OFF ( ) and to select
• desired blending mode: VARIABLE SPEEDS, SMOOTHIE, CRUSH, PUREE, and CLEAN.
• Variable Speeds: Select any speed for blending and pulsing by rotating the control knob from 1 to 10.
• Base: Contains the motor. DO NOT IMMERSE BASE IN WATER.
• Motor Protection Device: The Hamilton Beach Professional Blender is equipped with a motor overheating device. If the motor stops during operation due to overheating, unplug it and allow it to cool down for about 15 minutes. Plug the blender back in to resume normal operation.
• Preparing the Blender: After unpacking the blender, wash everything except the blender base in hot, soapy water. Dry thoroughly. Wipe the blender base with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER. Care should be taken when handling cutting blade assembly since it is very sharp. Refer to care recommendations on page 17.
• IMPORTANT: Blender jar and cutting blade assembly are subject to wear during normal use. Always inspect jar for nicks, chips, or cracks. Always inspect the cutting blade assembly for broken, cracked, or loose blades. If the jar or cutting blade assembly is damaged, do not use it. Call our customer care center to obtain replacement parts.
• Selecting Blender Settings: Select from four program settings or use the variable speeds precise speed control.

*To order parts:

• US: 1.800.851.8900
• www.hamiltonbeach.com
• Canada: 1.800.267.2826
• Mexico: 01 800 71 16 100

BEFORE FIRST USE: After unpacking the blender, follow the instructions in “Cleaning Your Blender.”

WARNING

• Burn Hazard. Metal parts under the blending jar get hot after use. Do not touch.

Using Program Settings

Programs are optimized for recipe categories and vary in blending speed and duration. The blender automatically stops at the end of the program. Some recipes may require more or less blending time.

Programs:

• SMOOTHIE – Blends frozen or fresh smoothies. The blender pulses five times in the beginning to chop ice or frozen ingredients and then ramps up to run on high speed 10 for 60 seconds.
• CRUSH – Breaks ice into pieces small enough for slushies or fine cocktails. The blender continuously pulses from speed 1 to 5 for 1 minute.
• PUREE – Gives a smooth, creamy consistency to pureed fruit or vegetables and a fine texture when making powdered sugar. Blender slowly ramps up from speed 1 to 10 for 1 minute 15 seconds.
• CLEAN – Add 2 cups (473 ml) of warm water and 2 drops of dish detergent to a blender jar before starting the program for easy cleaning. The filler cap should be kept in the lid. The blender runs for 1 minute. Rinse and dry.

1. Turn the control knob from (OFF) to one of the following programs: SMOOTHIE, CRUSH, PUREE, or CLEAN.

2. Place blender jar on base.

3. Fill by opening the lid. Add ingredients.

4. Place lid on jar.

5. Place quiet shield over blender jar assembly.

6. Press START/STOP.

7. WARNING Burn Hazard: When blending hot liquids, do not use a quiet shield and remove the filler cap of the two-piece lid. To prevent possible burns: Do not exceed the 2-cup (473-ml) level. Hot liquids may push off the two-piece lid during blending; therefore, with the protection of an oven mitt or thick towel, place one hand on top of the lid, keep exposed skin away from the lid, and start blending at the lowest speed.

8. Rotate the control knob to (OFF). Unplug.

9. Remove the quiet shield from the blender jar assembly.
   WARNING Burn Hazard: Metal parts under the blending jar get hot after use. Do not touch.

10. Remove lid.

11. Blender will automatically stop at the end of the program. To stop the blender at any time during the program, press START/STOP. If reactivated by pressing START/STOP again, the program will start at the beginning.

Using Variable Speed

1. Plug in a blender.

2. Place blender jar on base.

3. Fill by opening the lid. Add ingredients.

4. Place lid on jar.

5. Place quiet shield over blender jar assembly.

6. Press START/STOP.

7. Rotate the control knob clockwise. Always start at speed 1 and adjust to a higher speed after starting blender. FOR HOT  LIQUIDS
   WARNING Burn Hazard: When blending hot liquids, do not use a quiet shield and remove the filler cap of the two-piece lid. To prevent possible burns: Do not exceed the 2-cup (473-ml) level. Hot liquids may push off the two-piece lid during blending; therefore, with the protection of an oven mitt or thick towel, place one hand on top of the lid, keep exposed skin away from the lid, and start blending at the lowest speed.

8. Press START/STOP at any time to stop the blender.

9. Rotate the control knob to (OFF). Unplug.

10. Remove the quiet shield from the blender jar assembly.

11. WARNING Burn Hazard: Metal parts under the blending jar get hot after use. Do not touch.

12. Remove lid.

Using Pulse Setting

PULSE can be used with variable speeds to control chopping action or to encourage mixing of ingredients.

1. Place blender jar on base.

2. Fill by opening lid. Add ingredients.

3. Place lid on jar.

4. Place quiet shield over blender jar assembly.

5. Plug in blender.

6. Rotate control knob clockwise to select pulse speed. Always start at speed 1 and adjust to a higher speed after starting to pulse.

7. Press PULSE button. Increase PULSE speed by rotating the control knob clockwise.

8. To increase speed at the same time as pulsing, press and hold PULSE button.

9. Hold down the PULSE button for the desired time.
   FOR HOT  LIQUIDS
   WARNING Burn Hazard: When blending hot liquids, do not use quiet shield and remove filler-cap of two-piece lid. To prevent possible burns: Do not exceed the 2-cup (473-ml) level. Hot liquids may push off two-piece lid during blending; therefore, with the protection of an oven mitt or thick towel, place one hand on top of the lid, keep exposed skin away from the lid, and start blending at lowest speed.

10. Rotate control knob to (OFF). Unplug.

11. Remove quiet shield from blender jar assembly.

12. WARNING Burn Hazard: Metal parts under blending jar get hot after use. Do not touch.

13. Remove lid.

Using the Tamper

The tamper is a optional tool to help blend very thick and/or frozen mixtures. Use the tamper to remove trapped air bubbles if mixture stops circulating, or to move ingredients from jar corners into the blade. ONLY use the tamper with the jar lid in place.

1. Rotate control knob to (OFF) before using tamper.
2. Remove quiet shield from blender jar assembly. Remove filler-cap.
3. Insert tamper into hole in lid. Place one hand on top of the lid and use the tamper to move thick mixtures around in blender jar.
4. Point the tamper toward the sides or corners of the container. Do nottry to force the tamper deeper into the container and closer to the blades.

Tamper Tips:

• Blender jar should not be more than two-thirds full when the tamper is used during blending.
• Do not use tamper with hot liquids.

Tips to Prevent Overheating:

• Do not process recipes at lower speeds or higher speeds than recommended.
• Do not process recipes longer than recommended.
• Use tamper to process thicker mixtures and keep ingredients moving around and through the blades.

Blender Tips:

• To add foods when blender is operating, remove filler-cap and add ingredients through the hole in lid.
• For best performance, the minimum amount of liquid needed per recipe is one cup (8 ounces/237 ml). Add more liquid if food is not blending satisfactorily.
• If blending action stops during blending or ingredients stick to sides of the jar, insert tamper to help move the mixture around or add more liquid to the blender jar.
• Do not store food or liquids in the blender jar.
• Avoid bumping or dropping the blender when in operation or at any time.
• Cutting large whole fruits and vegetables may blend more quickly.
• Do not fill blender jar past highest graduation marking.

Using the Personal Blender Jar

(Optional Accessory on Select Models)

• WARNING Burn Hazard.
  Do not blend hot ingredients. Pressure may build, causing jar to pop off and hot ingredients to erupt.

• CAUTION Cut Hazard.
  Handle blades carefully; they are very sharp. Make sure unit is turned OFF ( ) and is unplugged.

1. Add ingredients to personal blender jar.

2. Carefully place the removable collar with cutting blade assembly onto jar.

3. Turn personal blender jar upside down. Place onto base.

4. Place quiet shield over jar assembly. If not using the quiet shield, hold jar in place while blending. Plug in blender.

5. Use a program setting.
   Press START and slowly rotate the VARIABLE SPEED DIAL to the right or left during blending to increase or decrease blending speed, or press the PULSE button to blend 15 to 30 seconds or until smooth. Always operate on a countertop or other supporting surface.

6. Rotate control knob to (OFF). Unplug.

7. Remove quiet shield from personal blender jar assembly.

8. Turn bottom up; remove collar and cutting blade assembly from jar.

9. Hand-tighten drinking lid onto personal blender jar.

Blending Tips for the 20-oz. Personal Blender Jar

• For best performance in the 20-oz. personal blender jar, the minimum amount of liquid needed per recipe is 3/4 cup (6 ounces/177 ml).
• Do not chop or process hard foods such as cheese, crackers, or meat.
• If blending action stops during blending or ingredients stick to sides of the jar, turn blender OFF ( ). Remove jar, collar, and blade and use a narrow rubber spatula to stir.
• Do not process hot foods or liquids in personal blender jar.
• Avoid bumping or dropping the blender jar.
• If blender stops working, unplug and allow 15 minutes before using. Plug into outlet to start blending.
• For blending protein powder drinks, blend less than 16 oz. (473 ml) since protein powders expand during blending.

Recipes

Tomatillo Salsa

Ingredients:

• 4 medium tomatillos, husked and quartered
• 1 small onion, quartered
• 1 small jalapeno, halved
• 1 clove garlic
• 1/2 teaspoon (2.5 ml) salt
• 3 sprigs cilantro

Directions:

• Place ingredients into the blender jar in the order listed.
• Process on Speed 10 until blended.
• Garnish with additional cilantro and serve as a sauce or with tortilla chips.

Serves: 6 to 8

Strawberry Margarita

Ingredients:

• 3/4 cup (177 ml) chopped strawberries
• 1 tablespoon (15 ml) sugar
• 2 tablespoons (30 ml) lime juice
• 5 tablespoons (74 ml) tequila
• 2 tablespoons (30 ml) triple sec
• 1 cup (237 ml) ice cubes

Directions:

• Place ingredients into the blender jar in the order listed.
• Blend on CRUSH until blended.
• Rub the rims of glasses with a wedge of lime. Dip in a dish of kosher salt or sugar. Pour in margarita.

Serves: 2 to 3

Traditional Basil Pesto

Ingredients:

• 2 cups (473 ml) fresh basil leaves
• 1/2 cup (118 ml) pine nuts
• 2 garlic cloves
• 1/2 cup (118 ml) olive oil
• 1/2 cup (118 ml) grated Parmesan cheese
• 1/4 teaspoon (1.3 ml) salt

Directions:

• Place ingredients into the blender jar in the order listed.
• Select SPEED 5 and PULSE 2–3 times.
• Press START and gradually increase the speed to SPEED 10, blending until smooth, 30–45 seconds.

Makes: 1 1/4 cups

Test Kitchen Tip: Divide Traditional Basil Pesto sauce between two ice cube trays; cover with plastic wrap and freeze. When the pesto sauce is frozen solid, pop the pesto cubes out and place in a resealable plastic freezer bag. Remove pesto cubes from bag as needed. For an individual serving, defrost one pesto cube and tosswith hot cooked pasta or spread on your favorite sandwich or wrap. For more great tips on using basil, visit our Everyday Good Thinking Blog, Food Focus: Basil.

Creamy Caesar Dressing

Ingredients:

• 3 anchovies
• 1 clove garlic
• 2 tablespoons (30 ml) lemon juice
• 1 teaspoon (5 ml) Dijon mustard
• 1 teaspoon (5 ml) Worcestershire sauce
• 1/2 teaspoon (2.5 ml) cracked black pepper
• 1/2 cup (118 ml) mayonnaise
• 1/2 cup (118 ml) grated Parmesan cheese
• 1/3 cup (79 ml) olive oil

Directions:

• Place anchovies, garlic, lemon juice, mustard, Worcestershire sauce and black pepper in blender jar.
• Select SPEED 5 and PULSE 2–3 times until mixture is creamy.
• Add mayonnaise, Parmesan cheese and oil to blender. Select SPEED 3 and PULSE 2–3 times until smooth.
• Refrigerate.

Makes: 1 1/4 cups

Test Kitchen Tip: For thinner dressing add water, 1 tablespoon (15 ml) at a time, until desired consistency is reached.

Triple Berry Smoothie

Ingredients:

• 1/2 cup (118 ml) cranberry-raspberry juice
• 4 ounces (113 g) fresh strawberries, hulled and quartered
• (3/4 cup [177 ml])
• 3 ounces (85 g) fresh raspberries (2/3 cup [158 ml])
• 2 ounces (57 g) fresh blueberries (1/3 cup [79 ml])
• 1 small ripe banana, cut into large chunks
• 1/2 cup (118 ml) vanilla yogurt
• 6 ice cubes

Directions:

• Place ingredients into the blender jar in the order listed.
• Select SPEED 5 and PULSE 2–3 times.
• Press START and gradually increase the speed to SPEED 10, blending until smooth, 30–45 seconds.

Serves: 1 to 2

Test Kitchen Tip: Try different combinations of fresh berries and juice to make new flavors of smoothies.

Cleaning Your Blender

WARNING Electrical Shock Hazard. Disconnect power before cleaning. Do not immerse cord, plug, base, or motor in water or other liquid.

• Unplug cord.
• After blending, add 1 cup (237 ml) warm water and 1 drop dishwasher liquid to jar. Blend on CLEAN program. Rinse and dry immediately. For a morethorough cleaning, sprinkle 2 tablespoons (30 ml) baking soda in blender. Add 1/2 cup (118 ml) white vinegar. Mixturewill bubble. When bubbling subsides, add 1 cup (237 ml) water and blend on the CLEAN cycle. Wash any remaining residue with dish soap and water.Rinse and dry.
• Remove quiet shield from blender jar assembly.
• Lift blender jar assembly off the base.
• Remove lid.
• Remove quiet shield from personal blender jar assembly.
• Wipe blender base, control panel, and cord with a damp cloth or sponge. To remove stubborn spots, use a mild, nonabrasive cleanser.
• Wash all removable parts in hot, soapy water. Rinse and dry to maintain appearance. Care should be taken when handling the cutting blade assembly since it is very sharp.
• DISHWASHER-SAFE DO NOT use the “SANI” setting when washing in the dishwasher. “SANI” cycle temperatures could damage your product.

Troubleshooting

PROBLEM

• Blender fails to start.
• Unit does not respond to button commands.
• Blender smells like it is burning.
• There is grease around the bottom of the blender jar or on the counter top.
• Blender jar is cloudy or stained. How can I clean it?

PROBABLE CAUSE/SOLUTION

• Blender fails to start:
  • Make sure control knob is not in the ∘∘ (OFF) position.
  • Check to see if the unit is securely plugged into an electrical outlet of proper voltage and frequency.
  • Check to see if fuse for electrical outlet has blown or if circuit breaker has tripped.
• Unit does not respond to button commands:
  • Turn power off and back on using control knob to reset controls.
  • If unit does not respond, call our customer care center at 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada.
• Blender smells like it is burning:
  • Turn unit to ∘∘ (OFF) and allow to cool.
  • Although motors are tested during the manufacturing process, heavy use may cause curing of motor windings. The smell may quickly dissipate after a few heavy uses.
  • If smell continues after additional heavy uses, call our customer care center at 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada.
• There is grease around the bottom of the blender jar or on the counter top:
  • Monitor the problem and source. This may indicate an issue with the jar bearings.
  • Call our customer care center at 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada if the condition persists.
• Blender jar is cloudy or stained. How can I clean it?:
  • Some cloudiness may be natural after use. The minerals from fruits, produce, and leafy greens, in addition to the oils of various nut butters, can sometimes cause a film on the blender jar.
  • Sprinkle 2 tablespoons (30 ml) baking soda in blender. Add 1/2 cup (118 ml) white vinegar. Mixture will bubble. When bubbling subsides, add 1 cup (237 ml) water and blend on the CLEAN cycle. Wash any remaining residue with dish soap and water. Rinse and dry thoroughly.

Hamilton Beach 5-Year Limited Warranty

• This warranty applies to products purchased in the U.S. and Canada. This is the only express warranty for this product and is in lieu of any other warranty or condition.
• This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or any component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us and our returning a product or component under this warranty to you. If the product or component is no longer available, we will replace it with a similar one of equal or greater value.
• This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 120V ~ 60 Hz).
• We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.
• To make a warranty claim, do not return this appliance to the store. Please call 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada or visit hamiltonbeach.com in the U.S. or hamiltonbeach.ca in Canada. For faster service, locate the model, type, and series numbers on your appliance.

Hamilton Beach Brands, Inc. 4421 Waterfront Drive Glen Allen Virginia 23060USA

FREQUENTLY ASKED QUESTIONS

What is the brand and model of this powerful blender with a Quiet Shield?

The brand is Hamilton Beach Professional, and the model is 58870.

What color is the Hamilton Beach 58870 Professional Quiet Shield Blender?

The color is DAA.

What special features does the Hamilton Beach 58870 Professional Quiet Shield Blender have?

It has a Manual operation, a Powerful 1500 Watt/20 Peak HP motor, and Hardened, Stainless Steel Blades for fast blending.

What is the capacity of the blender jar in the Hamilton Beach 58870 Professional Blender?

The capacity is 32 Fluid Ounces.

What are the product dimensions of the Hamilton Beach 58870 Professional Quiet Shield Blender?

The product dimensions are 7.68 inches in diameter, 17.2 inches in width, and 11.42 inches in height.

What components are included with the Hamilton Beach 58870 Professional Quiet Shield Blender?

The included component is the Blender.

What style is the Hamilton Beach 58870 Professional Quiet Shield Blender?

It is a 1500 Watt - 4 Programs style.

In what rooms is the Hamilton Beach 58870 Professional Quiet Shield Blender recommended for use?

It is recommended for Blending and Ice Crushing.

What is the power source of the Hamilton Beach 58870 Professional Quiet Shield Blender?

The power source is AC/DC.

How many speeds does the Hamilton Beach 58870 Professional Quiet Shield Blender have?

It has 10 speeds.

What is the voltage of the Hamilton Beach 58870 Professional Quiet Shield Blender?

The voltage is 110 Volts.

What type of material is free in the Hamilton Beach 58870 Professional Quiet Shield Blender?

The material is BPA Free.

What is the blade material of the Hamilton Beach 58870 Professional Quiet Shield Blender?

The blade material is Stainless Steel.

What is the weight of the Hamilton Beach 58870 Professional Quiet Shield Blender?

The weight is 9.85 pounds.

What is the item model number of the Hamilton Beach 58870 Professional Quiet Shield Blender?

The item model number is 58870.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:Hamilton Beach 58870 Professional Quiet Shield Blender Instruction Manual

REFERENCE:Hamilton Beach 58870 Professional Quiet Shield Blender Instruction Manual- Device.Report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>