OMCAN PM-CN-0150 Pasta Sheeter with 5.75-Inch Roller Width Instruction Manual

OMCAN PM-CN-0150 Pasta Sheeter with 5.75-Inch Roller Width Instruction Manual

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing.
Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the equipment if servicing or returning of the machine is required.

Safety and Warranty

WARNING

• Please ensure that the voltage of the outlet matches that of the unit.
• Do not wear long sleeves, necklaces, hoods, or wear long hair loosely as it could cause a hazardous situation.
• If the supply cord is damaged, it must be replaced by Omcan or one of it’s qualified service agents.
• The connection must be grounded.
• For indoor use only.
• Ensure that children do not operate or play with the machine.
• To protect against risk of electrical shock do not put any part of the appliance in water or other liquid.
• Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning.
• Do not leave appliance unattended.
• Switch off the appliance before approaching parts which move in use

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non- commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

1 YEAR PARTS AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.

Please seehttps://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

Operation

BEFORE FIRST USE

Clean the machine with a clean, dry cloth before your first use. In order to clean the roller and cutter, you can pass a small quantity of dough through them several times. Then discard the dough.

TO USE

1. Cut the dough into manageable pieces with a knife.
2. Pull the knob and turn to “1”, let the two rollers completely open (about 2.5mm).
3. Put the two covers over the wide and narrow cutters, turn on the switch and pass a piece of dough through the roller. Sprinkle some flour on the dough if necessary.
4. Repeat the operation 2-3 times.
5. When the dough has taken a regular shape, adjust the knob to “2”. Then repeat until you achieve the desired thickness.
6. Put the dough into the wide cutter to achieve wide noodles.
   Alternatively, put the dough into the narrow cutter to achieve narrow noodles.

NOTE

• If the cutters can’t cut, it means the dough is too soft and you should pass the dough through the rollers with flour several times.
• If the dough is too hard and the machine can’t operate, please put the dough into a bowl and mix in more water.
• The work time of the machine cannot exceed 15 minutes at a time.
• Do not adjust the knobs while the machine is in use.
• Unplug the unit before cleaning and performing maintenance.
• Use a soft and dry cloth to clean the machine after use.
• Never wash the machine with water or in a dishwasher.
• Use a brush to clean the cutters and rollers after use.
• If necessary or if the rollers squeak, you can lubricate the rollers with food safe oil.
• Don’t insert knives or cloths in between the rollers.
• It is advisable to store the machine and accessories in the original box after using.
• All repairs are to be performed by a qualified technician.
• Do not dismantle the machine, doing so could be hazardous and void the warranty.

Parts Breakdown

Model PM-CN-0150 44520
Model PM-CN-0150-S 46587

Model PM-CN-0150 44520

Item No.| Description| Position| Item No.| Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
AI993| Right Cover for 44520| 1| AJ015| Roller Gear (2pc) for 44520| 23| AJ037| Cutter Chief Axis (2), Cutter Auxiliary (2) for 44520| 45
AI994| Gear Rack I, Screw (6pc), Spring Pad (6pc), Flat Pad (6pc) for 44520| 2| AJ016| Adjusting Bracket, Nut (2pc), Wedge (21pc) for 44520| 24| AJ038| 150 Scraping Knife (2pc) for 44520| 46
AI995| One Stage Transmission Gear, Two Stage Transmission Gear, Three Stage Transmission Gear (4pc) for 44520| 3| AJ017| Eccentric Shaft for 44520| 25| AJ039| Combs 6 (2pc) for 44520| 47
AI996| Gear Shaft II, Steering Ring (1pc) for 44520| 4| AJ018| Left Cover Frame, Screw (2pc), Grooved Metal Gasket (2pc) for 44520| 26| AJ040| Combs 2 (2pc) for 44520| 48
AI997| Gear Shaft I, Cylindrical Pin (1pc) for 44520| 5| AJ019| Switch Frame, Tapping Screw with Pad (2pc) for 44520| 27| AJ041| Lampstand for 44520| 49
AI998| Shore III (6pc) for 44520| 6| AJ020| Touch Switch, Tapping Screw (2pc) for 44520| 28| AJ042| Breathable Sheet for 44520| 50
AI999| Binding Bolt M5 (2pc) for 44520| 7| AJ021| Switch for 44520| 29| AJ043| Bottom Board (2pc), Self Tapping Screw (4pc) for 44520| 51
AJ000| Eccentric Shaft for 44520| 8| AJ022| Left Cover, Tapping Screw (2pc) for 44520| 30| AJ044| Straw (4pc), Self Tapping Screw (4pc) for 44520| 52
AJ001| M6 Long Double Threaded Screw (2pc) for 44520| 9| AJ023| Adjusting Plate for 44520| 31| AJ045| Gear Rack II, Nut (3pc), Screw (2pc), Spring Pad (5pc), Flat Pad (5pc) for 44520| 53
AJ002| M5 Long Double Threaded Screw for 44520| 10| AJ024| Adjusting Handle, Screw (1pc) for 44520| 32| AJ046| Inserts (11pc) for 44520| 54
AJ003| Electric Motor, Screw (6pc), Spring Pad (4pc) for 44520| 11| AJ025| Round Spring for 44520| 33| AJ047| Short Sleeve for 44520| 55
AJ004| Right Bracket for 44520| 12| AJ026| Button Switch (Four Second) for 44520| 34| AJ048| Gear Shaft III (3pc), Cylindrical Pin (3pc) for 44520| 56
AJ005| Axle Sleeve (2pc) for 44520| 13| AJ027| Power Line Deduction (6N-4) for 44520| 35| AJ049| Shore I (3pc) for 44520| 57
AJ006| Eccentric Bushing for 44520| 14| AJ028| Screw Hole Pillar (2pc) for 44520| 36| AJ050| Shore II (2pc) for 44520| 58
AJ007| Surface Cover (2pc) for 44520| 15| AJ029| Power Line for 44520| 37| AJ051| Layer of Output Shaft, Cylindrical Pin (2pc), Adjusting Wedge for 44520| 59
AJ008| Cover of Forearm, Cover of Rear Arm, Cover of Left Arm, Cover of Right Arm, Screw (4pc) for 44520| 16| AJ030| Wiring Terminal, Connecting Line I, Connecting Line II, Connecting Line III, Tapping Screw (2pc) for 44520| 38| AJ052| Dowel (2pc), Distance Piece for 44520| 60
AJ009| Front Baffle for 44520| 17| AJ031| Wire Holder, Screw (2pc) for 44520| 39| AJ053| Output Gear, Mid Gear, Helical Gear for 44520| 61
AJ010| Mid Baffle for 44520| 18| AJ032| Rubber Sleeve for 44520| 40| AJ054| Gear Rack III, Screw (5pc), Spring Pad (5pc) for 44520| 62
AJ011| Small Intermediate Baffle for 44520| 19| AJ033| Roller Spring Clip (2pc) for 44520| 41| AJ055| Fixed Plate Set (4pc) for 44520| 63
AJ012| Back Baffle for 44520| 20| AJ034| Cutter Spring Clip (2pc) for 44520| 42| AJ056| Damping Pad (5pc) for 44520| 64
AJ013| Left Bracket for 44520| 21| AJ035| Roller Chief Axis, Roller Auxiliary Axis, Bulkhead for 44520| 43| AJ057| Motor Cover for 44520| 65
AJ014| Cutter Gear (4pc), Axial Ring File (4pc) for 44520| 22| AJ036| Cutter Chief Axis (6), Cutter Auxiliary (6) for 44520| 44| | |

Model PM-CN-0150-S 46587

Item No.| Description| Position| Item No.| Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
AJ058| Right Cover for 46587| 1| AJ015| Roller Gear (2pc) for 46587| 23| AJ037| Cutter Chief Axis (2), Cutter Auxiliary (2) for 46587| 45
AI994| Gear Rack I, Screw (6pc), Spring Pad (6pc), Flat Pad (6pc) for 46587| 2| AJ016| Adjusting Bracket, Nut (2pc), Wedge (21pc) for 46587| 24| AJ038| 150 Scraping Knife (2pc) for 46587| 46
AI995| One Stage Transmission Gear, Two Stage Transmission Gear, Three Stage Transmission Gear (4pc) for 46587| 3| AJ017| Eccentric Shaft for 46587| 25| AJ039| Combs 6 (2pc) for 46587| 47
AI996| Gear Shaft II, Steering Ring (1pc) for 46587| 4| AJ018| Left Cover Frame, Screw (2pc), Grooved Metal Gasket (2pc) for 46587| 26| AJ040| Combs 2 (2pc) for 46587| 48
AI997| Gear Shaft I, Cylindrical Pin (1pc) for 46587| 5| AJ019| Switch Frame, Tapping Screw with Pad (2pc) for 46587| 27| AJ061| Lampstand for 46587| 49
AI998| Shore III (6pc) for 46587| 6| AJ020| Touch Switch, Tapping Screw (2pc) for 46587| 28| AJ042| Breathable Sheet for 46587| 50
AI999| Binding Bolt M5 (2pc) for 46587| 7| AJ021| Switch for 46587| 29| AJ043| Bottom Board (2pc), Self Tapping Screw (4pc) for 46587| 51
AJ000| Eccentric Shaft for 46587| 8| AJ060| Left Cover, Tapping Screw (2pc) for 46587| 30| AJ044| Straw (4pc), Self Tapping Screw (4pc) for 46587| 52
AJ001| M6 Long Double Threaded Screw (2pc) for 46587| 9| AJ023| Adjusting Plate for 46587| 31| AJ045| Gear Rack II, Nut (3pc), Screw (2pc), Spring Pad (5pc), Flat Pad (5pc) for 46587| 53
AJ002| M5 Long Double Threaded Screw for 46587| 10| AJ024| Adjusting Handle, Screw (1pc) for 46587| 32| AJ046| Inserts (11pc) for 46587| 54
AJ003| Electric Motor, Screw (6pc), Spring Pad (4pc) for 46587| 11| AJ025| Round Spring for 46587| 33| AJ047| Short Sleeve for 46587| 55
AJ004| Right Bracket for 46587| 12| AJ026| Button Switch (Four Second) for 46587| 34| AJ048| Gear Shaft III (3pc)-Cylindrical Pin (3pc) for 46587| 56
AJ005| Axle Sleeve (2pc) for 46587| 13| AJ027| Power Line Deduction (6N-4) for 46587| 35| AJ049| Shore I (3pc) for 46587| 57
AJ006| Eccentric Bushing for 46587| 14| AJ028| Screw Hole Pillar (2pc) for 46587| 36| AJ050| Shore II (2pc) for 46587| 58
AJ007| Surface Cover (2pc) for 46587| 15| AJ029| Power Line for 46587| 37| AJ051| Layer of Output Shaft, Cylindrical Pin (2pc), Adjusting Wedge for 46587| 59
AJ059| Cover of Forearm, Cover of Rear Arm, Cover of Left Arm, Cover of Right Arm, Screw (4pc) for 46587| 16| AJ030| Wiring Terminal, Connecting Line I, Connecting Line II, Connecting Line III, Tapping Screw (2pc) for 46587| 38| AJ052| Dowel (2pc), Distance Piece for 46587| 60
AJ009| Front Baffle for 46587| 17| AJ031| Wire Holder, Screw (2pc) for 46587| 39| AJ053| Output Gear, Mid Gear, Helical Gear for 46587| 61
AJ010| Mid Baffle for 46587| 18| AJ032| Rubber Sleeve for 46587| 40| AJ054| Gear Rack III, Screw (5pc), Spring Pad (5pc) for 46587| 62
AJ011| Small Intermediate Baffle for 46587| 19| AJ033| Roller Spring Clip (2pc) for 46587| 41| AJ055| Fixed Plate Set (4pc) for 46587| 63
AJ012| Back Baffle for 46587| 20| AJ034| Cutter Spring Clip (2pc) for 46587| 42| AJ056| Damping Pad (5pc) for 46587| 64
AJ013| Left Bracket for 46587| 21| AJ035| Roller Chief Axis, Roller Auxiliary Axis, Bulkhead for 46587| 43| AJ057| Motor Cover for 46587| 65
AJ014| Cutter Gear (4pc), Axial Ring File (4pc) for 46587| 22| AJ036| Cutter Chief Axis (6), Cutter Auxiliary (6) for 46587| 44| | |

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting:

https://omcan.com/warranty-registration/

For mailing in Canada

OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5

For mailing in the US

OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305

or email to:service@omcan.com

Purchaser’s Information

Name: __

Address: __

City: __
Province or State: __
Postal or Zip: __

Country: __

Dealer from which Purchased: __

Dealer City: __
Dealer Province or State: __

Invoice: __

Model Name: __
Model Number: __

Machine Description: __
Date of Purchase (MM/DD/YYYY): __

Would you like to extend the warranty? Yes No

Company Name: __

Telephone: __

Email Address: __

Type of Company: __

Restaurant Bakery Deli

Butcher Supermarket Caterer:

Institution (specify): __

Other (specify): __

Serial Number: __

Date of Installation (MM/DD/YYYY):

Thank you for choosing Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 6,500 globally sourced products.

References

• Omcan
• Disclaimer – Omcan
• Warranty Registration – Omcan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>