nedis GSMIC410BK Streaming Microphone User Guide

: June 17, 2024
: nedis

Table of Contents

GSMIC410BK Streaming Microphone
Streaming microphone
Main parts (image A)
Safety instructions
Disposal
Documents / Resources

Streaming microphone with anti-shock mount
GSMIC410BK nedis GSMIC410BK Streaming Microphone Quick start guide

GSMIC410BK Streaming Microphone

nedis GSMIC410BK Streaming Microphone - Figure

nedis GSMIC410BK Streaming Microphone - Figure 1

nedis GSMIC410BK Streaming Microphone - Figure 2 GSMIC410BK

Streaming microphone

For more information see the extended manual online: ned.is/gsmic410bk

Intended use
This product is a streaming microphone kit consisting of a microphone, a pop filter, a desktop stand, and a shock mount.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts (image A)

Desktop clamp
Shock mount
Volume wheel
Microphone
Record button
USB-B port
Pop filter
USB-B – USB-A cable
Foam cover
Stand
Adjustment knob

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not open the product, there are no user serviceable parts inside.
Do not immerse the product in water or other liquids.
Do not expose the product to water, rain, moisture, or high humidity.
Disconnect the product from the power source before cleaning.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
Do not drop the product and avoid bumping.
Do not use aggressive chemical cleaning agents when cleaning the product.

Installing the product (image B – D)

Attach the desktop clamp A1 to the surface where the product will be used.
Place the bottom of the stand in the desktop clamp A1.
Loosen the adjustment knob Aw to adjust the stand.
Screw the shock mount A2 on the top of the stand.
Screw the microphone A4 in the shock mount A2.
Attach the pop filter A7 to the standAq.
Plug one end of the USB-B – USB-A cable A8 into the USB-B port A6.
Plug the other end of the USB-B – USB-A cable A8 into a USB port of your device.

Set the product as the default microphone for your device
For macOS:

Navigate to System Preferences.
Select Sound.
Select the Input tab.
Select the product GSMIC410BK from the list.

For Windows 10:

Right click on the speaker icon on your Windows taskbar.
Select Sounds.
Select the Recording tab.
Select the product GSMIC410BK from the list.
Press Set Default.

Using the product

Press the record button A5 to start recording.
Rotate the volume wheel A3 to adjust the volume to the desired sound level.
Control the microphone sensitivity through the settings on your device.
After use, press the record button A5 to stop recording.

Disposal

The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible for the waste management.

ned.is/gsmic410bk
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands