nedis RDDBCR2000GN FM Crank Radio with Power Supply For Every Situation User Guide

: June 17, 2024
: nedis

nedis RDDBCR2000GN FM Crank Radio with Power Supply For Every Situation

nedis-RDDBCR2000GN-FM-Crank-Radio-with-Power-Supply-For-Every-Situation-
product

Product Information

Specifications

Product Name: Emergency DAB+/FM Crank Radio
Model: RDDBCR2000GN
LED Reading Light
Speaker
Solar Panel
Hand Crank
Antenna
USB-C Port
USB Port

Product Usage Instructions

Safety Instructions

Read all safety instructions in the document before installing or using the product. Keep the packaging and document for future reference.

Charging the Product

Solar Panel:
Place the solar panel in direct sunlight. The battery indicator blinks when charging and burns continuously when fully charged.

Hand Crank:
Unfold the hand crank and turn it to generate power.

USB Charging Port:
Open the rubber cap and plug the USB-C cable into the USB-C port.
Plug the other end of the cable into a power source.

Switching On the Product

Extend the antenna.
Press and hold the MODE button to switch on the product.
Press and hold the MODE button to switch on the display.

Navigating the Interface

Press and hold the MENU/INFO button to enter the menu.
Use the previous or next buttons to navigate to desired options.

Changing the Language

Enter the menu.
Select System.
Choose Language.
Select desired language.

Scanning for Radio Stations

DAB Mode:
For automatic scanning: Select Station List, choose desired station, and start a station scan.
For manual scanning: Select desired channel and station.

FM Mode:

Search for a station using previous or next buttons.
Hold previous or next button to start scanning.

FAQ

Q: How do I know if the product is fully charged?

A: The battery indicator will burn continuously when the product is fully charged.

Q: How do I switch between DAB and FM mode?

A: Press the MODE button to cycle between DAB and FM mode.

Emergency DAB+/FM Crank Radio with power supply for every situation

RDDBCR2000GN

ned.is/rddbcr2000gn

nedis-RDDBCR2000GN-FM-Crank-Radio-with-Power-Supply-For-Every-Situation-
fig-1 Emergency DAB+/FM Crank Radio

For more information see the extended manual online: ned.is/rddbcr2000gn

Intended use

This product is an emergency DAB+/FM crank radio that can be charged via the solar panel, hand crank, or the USB port.
This product is intended for indoor and outdoor use.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision. The product is not intended for professional use.
This product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such
as: shops, offices other similar working environments, farm houses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments. Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts

(image A)

nedis-RDDBCR2000GN-FM-Crank-Radio-with-Power-Supply-For-Every-Situation-
fig-2

LED reading light
Speaker
MODE button
Display
Solar panel
Siren button
Hand crank
Antenna
Flashlight button
Rubber cap
USB-C port
USB port
Battery indicator
MENU/INFO button
SELECT/SCAN button
Previous button
Next button
VOL- button p
VOL+ button
USB-C cable

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.

Do not expose the product to a high pressure of water or moisture.
Do not expose the product to water, rain, moisture or high humidity.
Do not expose the product to very hot or very cold temperatures.
Do not immerse the product in water.
Do not charge when the product is wet.
Only power the product with the voltage corresponding to the markings on the product.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not look directly into the LED reading light, doing so may damage your eyes.
Do not drop the product and avoid bumping.
Extended exposure to high volumes can cause hearing loss.
Before cleaning and maintenance, switch off the product and disconnect the power.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Cleaning and user maintenance shall not be done by children without supervision.
Do not open the product, there are no user serviceable parts inside.

Charging the product

Solar panel:

Place the solar panel A5 in direct sunlight.
The battery indicator Ar blinks to indicate the product is charging. The battery indicator Ar burns continuously to indicate the product is fully charged.

Hand crank:

Unfold the hand crank A7.
Turn the hand crank A7 to generate power and charge the product. It takes around 3 – 5 minutes to fully charge the product using the hand crank.
The battery indicator Ar blinks to indicate the product is charging. The battery indicator Ar burns continuously to indicate the product is fully charged.
Fold in the hand crank A7.

USB charging port:

Open the rubber cap Aq.
Plug the USB-C cable Aa into the USB-C port Aw.
Plug the other end of the USB-C cable Aa into a power source or a power adapter (not included).
Plug the power adapter into a power outlet.
The battery indicator Ar blinks to indicate the product is charging. The battery indicator Ar burns continuously to indicate the product is fully charged.

Switching on the product

Extend the antenna A8.
Press and hold the MODE button A3 to switch on the product.
Press and hold the MODE button A3 to switch on the display A4.
The product automatically switches to standby after 15 minutes of inactivity.
The product automatically selects DAB mode and starts scanning for DAB channels.

Navigating the interface

Press and hold the MENU/INFO button At to enter the menu.
Press the previous or next button Aui to navigate to the desired option.

Changing the language

Enter the menu
Select System.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to select Language.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to select the desired language.
Press the SELECT/SCAN button Ay.

Scanning for radio stations

Press the MODE button A3 to cycle between DAB and FM mode.

DAB mode
For automatic scanning:

Enter the menu
Select Station List.
Press the previous or next button Aui to select the desired station.
Press the SELECT/SCAN button Ay to start a station scan.

For manual scanning:

Enter the menu
Select the desired channel.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to select the desired station.

FM mode

Press the previous or next button Aui to search for a station.
Press and hold the previous or next button Aui to start a station scan.
The scan stops when the first station is located.

Saving and listening to preset stations

Search the desired station.
Enter the menu
Select Preset Store.
Press the previous or next button Aui to select the desired memory location.
Press the SELECT/SCAN button Ay.
Enter the menu
Select Preset Recall.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to select the desired station.
Press the SELECT/SCAN button Ay.

Changing the volume
Press the VOL- button Ao and VOL+ button Ap to adjust the volume.

Using the alarm

Press the MODE button A3 to switch the product to standby mode.
Enter the menu
Select Set alarm.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to select the desired alarm.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to switch the alarm on or off.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to set the hours while the hours are blinking.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to set the minutes while the minutes are blinking.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to select the alarm mode.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to select the alarm type.
Press the SELECT/SCAN button Ay.
Press the previous or next button Aui to select the alarm volume.
Press the SELECT/SCAN button Ay.
Press the SELECT/SCAN button Ay to snooze the alarm. The alarm rings again after 9 minutes.
Press the MODE button A3 to switch the alarm off.

Using the LED reading light

Unfold the solar panel A5 to switch on the LED reading light A1.
Fold the solar panel A5 to switch off the LED reading light A1.

Using the Siren button
Press the Siren button A6 to sound a siren.

Switching off the product

Press the MODE button A3 to switch the product to standby mode.
Press and hold the MODE button A3 to switch off the product.
The display A4 switches off.

Disposal

The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible for the waste management.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product RDDBCR2000GN from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/RDDBCR2000GN#support

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch The Netherlands