TESLA WC6 Wireless Phone Charger User Manual

TESLA WC6 Wireless Phone Charger

Product Information

Specifications

• Output Power: 15W*2
• Temperature Range: -40°C to 85°C (Operating), -40°C to 105°C (Storage)
• Input Parameter: 48V @ 1A
• Charging Efficiency: Coil Center >70%
• Charging Operating Frequency: 127.7kHz
• NFC Operating Frequency: 13.56MHz

Product Introduction
The Wireless Phone Charger (Model: WC6) can charge your Qi-enabled smartphone at up to 15W of power. It supports charging two phones simultaneously, side by side. Ensure that your phone case is not metal as it may prevent charging. Remove the phone case before placing the phone on the charger.

Mechanical Design

Product 3D View
View the product in 3D for a detailed visual representation.

Product 3D Exploded View
Explore an exploded view of the product to understand its internal components.

Dimension 2D View
View the product dimensions in 2D for precise measurements.

Safety Instructions
This wireless charger has passed Qi certification and is suitable for charging products that also meet Qi certification standards. Do not charge devices that do not meet Qi requirements or use unauthorized power supplies, chargers, or batteries as it may pose fire hazards.

FCC IC Statement:
This device complies with FCC and IC regulations regarding interference and radiation exposure limits. Maintain a minimum distance of 0cm between the device and your body during operation.

Product Usage Instructions

Charging Your Phone

1. Ensure your smartphone is Qi-enabled.
2. Remove any metal phone cases that may interfere with charging.
3. Place your phone on the wireless charger, aligning it properly for charging.
4. The charger can support two phones charging simultaneously, side by side.
5. If the phone does not charge, reposition it on the charger for better alignment.

Cautions

• Avoid using the charger with non-Qi-certified devices to prevent damage.
• Do not expose the charger to water or extreme temperatures.
• Unplug the charger when not in use to save energy and prevent overheating.

FAQ

• Q: Can I use a metal phone case with a wireless charger?
  A: No, metal phone cases may interfere with charging. Remove the case before placing the phone on the charger.

• Q: How many phones can be charged simultaneously?
  A: The wireless charger supports charging up to two phones at once, side by side.

Product Introduction

The wireless phone charger can charge your Qi-enabled smartphone at up to 15W of power. Just simply place your smartphone on the charger. The wireless phone charger supports up to two phones at once, charging side by side.
NOTE : The wireless charger may not work if your phone case is metal. Take the phone out of the case and place the phone on the charger.

Mechanical Design

Product 3D View

Product 3D Exploded View

Dimension 2D View

Product Technical Parameters

Electrical

Specification

| Parameters:| Range:
---|---|---
Output Power| Max. Output| 15W*2
Temperature Range| Operating Temperature| -40℃~85℃
Storage Temperature| -40℃~105℃
Input Parameter| Voltage/Current| 48V @ 1A
Charging Efficiency| Rx Output Power VS Tx Input

Power

| Coil Center:>70%
Charging operating

Frequency

| /| 127.7kHz
NFC operating

Frequency

| /| 13.56MHz

Safety Instructions

• Before using and operating the equipment, please read and observe the following precautions.
• This product meets the technical standards of short-distance micro power class an equipment and relevant specifications.
• It is not allowed to disassemble the equipment, or change the internal structure, antenna, etc. to avoid danger.
• In places where the use of wireless devices is prohibited according to laws and regulations, such as in-flight, medical, and other places, please comply with the relevant regulations and requirements, stop using or turn off the devices. The use of micropower equipment in relevant electromagnetic environmental protection areas shall comply with the requirements of electromagnetic environmental protection and relevant industry authorities.
• The radio waves generated by devices may affect implantable medical devices, such as pacemakers, cochlear implants, hearing aids, etc. When using the wireless charging device, please keep a distance of at least 30 cm from the implanted medical device
• This product has passed the Qi certification of WPC and can charge the products that also pass the certification of WPC. Please don’t charge the wireless charging equipment that doesn’t meet the requirements of Qi, and don’t use an unauthorized or incompatible power supply, charger, battery, etc. to power the equipment, which may cause fire or other hazards.

FCC IC statement

This device complies with Part 15 of the FCC Rules and Industry Canada’s license-exempt RSS Standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference. And
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. ·If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Radiation Exposure Statement:

• This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body.
• This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Importer Information：

• Company name: Tesla Motors Netherlands B.V.
• Trademark: Tesla
• Address: Asteriastiaat 1-7 5047 RM TilburgThe Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>