TECHNI MOBILI RTA-B005 Adjustable Storage Medical Laptop Computer Cart Instruction Manual

TECHNI MOBILI RTA-B005 Adjustable Storage Medical Laptop Computer Cart

Product Information

Specifications

• Model: RTA-B005
• Product Name: Sit-to-Stand Rolling Adjustable Laptop Cart with Storage
• Assembly Instructions: Rev.OL-7284-0423

Product Usage Instructions

Inventory Check
Before starting the assembly, do a quick inventory of all the parts and hardware listed in the manual.

Assembly Support
If you need support, have assembly questions, or require replacement parts within the 48 Contiguous United States, email support at: [email protected]

International Customers
For international customers and AK-HI-PR orders, RTA Products will replace parts free of charge, but the customer is responsible for shipping costs and any local taxes or duties.

Hardware List
The product assembly requires specific hardware listed in the manual. Ensure you have the necessary tools included for assembly.

Assembly Steps

1. Attach magnet 17-A to the bottom surface of the middle upper shelf 8 and small steel plate 17-B to the inside surface of shelf door 18 using screws F.
2. Screw bolts D into panel 1. Join panels 4, 6, and 5 to panel 1 following the instructions provided.

FAQ

• What should I do if a part is missing?
  If you find any part missing during inventory, contact support immediately for assistance with replacement parts.

• How can I access the assembly video in different languages?
  You can scan the QR codes provided in the manual to view the assembly video in French or Arabic.

Do a quick inventory of all the parts and hardware listed below.

For Support, assembly questions & Replacement Parts within the 48 Contiguous United States:

Please email us at:
[email protected].

Replacement Parts for International Customers & AK-HI-PR orders:
RTA Products will replace the part free of charge, while the customer is responsible for shipping costs plus any International and local taxes or duties.

MAIN PARTS LIST

MAIN PARTS LAYOUT (For reference)

HARDWARE LIST

INCLUDED TOOLS

BEFORE YOU START THE ASSEMBLY

BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS.

• Please read the assembly instructions throughly and follow step by step.
• Make sure you understand which hardware will be used on each step. Using the wrong size of screw, bolt or pin might strip the threads or cause damage to the part in which it is being used.
• To avoid misalignments, always leave the screws loosely and do not tighten them until all the pieces are positioned correctly.
• Do not overtighten or force the screws as they might break, strip, damage the threads of the holes, or get stuck inside the parts.
• If the hole seems to small for the screw, make sure you are using the correct size of screw and/or that you are installing it in the correct hole.
• Sometimes on the wood panels the laminate or material might be covering the hole partially or entirely, if there is no visible hole or if it looks too small, pass and press the tip of your finger over the area to feel its indentation, and carefully pierce the laminate to uncover the hole underneath.
• After the item is assembled, you can use rubbing alcohol to erase or remove the visible part numbers printed or labelled on the pieces.

CAM BOLT AND CAM LOCK TUTORIAL THE INSTRUCTIONS BELOW ARE NOT ACTUAL ASSEMBLY STEPS

This unit uses cam bolts and locks (also known as mini fixes).
If you are not familiar with this kind of hardware, the below is a tutorial that explains how to use them on the steps where they are required.

1. Screw the bolt into the indicated hole on the panel indicated in the assembly step.
2. Join the other panel (with the big hole) to the panel with the bolt. If it comes with the cam locks already pre-installed, make sure to align them to receive the bolt’s head (refer to point 3). There might be a very small gap between the panels which is normal.
3. Insert the cam lock on the panel with the big hole making sure it goes aligned to receive the bolt’s head.
4. Use a Phillips screwdriver to turn the cam lock clockwise. This will lock the panels together and also will close any gaps.

ASSEMBLY STEPS

STEP 1

• Attach the magnet 17-A to the bottom surface of the middle upper shelf 8 with screws F.
• Attach the small steel plate 17-B to the inside surface of the shelf door 18 with screws F.

STEP 2

• Screw the bolts D into panel 1.
• Join panel 4 to panel 1 and turn the cam locks as explained.
• Assemble panel 6 to panel 1 in the same way making sure the surface with the cam locks towards the BOTTOM.
• Join panel 5 to panel 1.

STEP 3

• Insert the metal pin H into the corresponding hole on panel 1.
• Attach the door panel 18 to pin H, making sure the metal plate is visible as shown.

STEP 4

• Attach bolts D to the right-side panel 2 into the indicated holes.
• Insert the metal pin H into the door 18.
• Assemble panel 2 to panels 4, 5, 6 and 18 as shown and as explained.

STEP 5

• Use screws A to assemble the casters 3 to the bottom surface of the bottom base panel 7 in the following positions:
• The Locking casters 3-L go at the front of the panel.
• The Non-locking casters 3-N go at the back of the panel.

STEP 6

• Screw the bolts D into the indicated holes on the top surface of panel 7.
• Join the main frame to the base and lock the pieces together by turning the cam locks on panels 1, 2 and 4 as shown and as explained.

STEP 7

• Screw the bolts D to the middle upper shelf 8.
• Assemble the shelf 8 to panels 1, 2 and 4 as explained.

STEP 8

• Assemble the lateral support bars 9 to the base panel 7 with screws C from underneath. The screws go through the base panel and into the bars.
• Assemble the bars 9 to the side panels 1 and 2 with screws C from the side. The screws go through the bars and into the side panels.

STEP 9

EXTREMELY IMPORTANT!
Follow this step EXACTLY as instructed! An incorrect assembly leaves the tilting mechanism and the main panel prone to moving or sliding, and even might flip down and forwards unexpectedly under any weight.

• Place the curved connectors I over the threaded holes of the lifting tubes 10.
• Place the washer I over the connector I.
• Connect the right tilting mechanism 13 to tube 10.
• Insert and screw the screw knob 16 into the tube 10. The screw knob goes through the mechanism 13, the washer I, the connector I and into the tube 10.
• Repeat the procedure for the left tilting mechanism 14.
• THE SOFT PLASTIC WASHER MUST GO IN BETWEEN THE CONNECTOR AND THE MECHANISM, AS ITS PURPOSE IS TO CREATE THE NECESSARY FRICTION THAT KEEPS THE MECHANISM FIRM WITHOUT MOVING.
• DO NOT PLACE THE WASHER OVER THE MECHANISM, IT MUST GO UNDER IT.
• IF THE SOFT PLASTIC WASHER IS MISSING, DO NOT REPLACE IT WITH ANY OTHER KIND; DO NOT USE METAL OR HARD PLASTIC WASHERS.

STEP 10
Assemble the tilting mechanisms 13 and 14 to the main panel 12 in their respective sides with screws E.

STEP 11

• Place the plastic covers 11 over the lateral bars 9 with their threaded holes facing towards the outside.
• Slide the lifting tubes 10 through the plastic covers 11 and into the bars 9. Insert the screw knobs 16 into the plastic covers 11, but do not tighten yet.

STEP 12

• Lift the main panel 12 about 6 inches and tighten the screw knobs 16.
• Assemble the protection rail 15 to the main panel 12 with its curvature towards the front with screws B from underneath.

STEP 13
Assemble the handle 19 to the door 18 with screw G.

FUNCTIONS/ADJUSTMENTS

• LIFTING: Loosen the screw knobs to lift, then tighten again.
  • If you have objects or devices on or under the main panel, use caution when adjusting the height.
  • Do not overtighten the screw knobs.
  • Do not use the unit if the plastic covers or screw knobs look cracked or if they are stripped.
• TILTING: Loosen the screw knobs to tilt, then tighten again.
  • Make sure the tilting mechanisms are properly assembled as instructed in step 9. An incorrect assembly will result in the main top panel flippling down forwards unexpectedly.
  • Use caution when adjusting the tilting angle when you have objects or devices on it, and check if the protection rail can retain them, but if it seems that they might slip or tip over, reduce the tilting angle.
• ROLLING: Unlock the front casters to allow free movement.
  • Before moving the unit, unlock the front casters and secure or remove any object that might fall off while the unit is rolling.

WEIGHT LIMITS

SAFETY WARNINGS

• Do not exceed the indicated weight limits.
• Make sure that the tilting mechanisms are properly assembled as instructed in step 9. An incorrect assembly leaves the tilting mechanism unsecured, and the main top panel will not hold enough weight on it and even might flip down forward unexpectedly.
• It is recommended to first tilt the main panel, then place the objects or devices, but pay attention to if they will be properly retained by the protection rail. If the object or device seems to tip over, reduce the tilting angle.
• If you have objects or devices on or under the main panel, use caution when adjusting the height or tilting angle.
• Do not overtighten the screw knobs.
• Do not use the unit if the plastic covers or screw knobs look cracked or if they are stripped.
• Do not expose the surfaces to direct sunlight or to extreme environmental conditions.
• Do not use solvents or abrasive materials to clean the unit.
• Do not climb on the base of the unit.
• Do not allow small children to play with the unit.
• Before moving the unit, unlock the front casters and secure or remove any object that might fall off while the unit is rolling.
• The warranty does not extend to regular wear and tear, nor the manufacturer assumes liability for damages or consequences due to accidents, incorrect assembly, negligence, improper use, modifications, or not heeding the above warnings.

CARE AND MAINTENANCE

• Clean the surfaces preferably with a clean cloth damped in a solution of mild soap and water, then dry with a clean towel.
• If you decide to use a cleaning agent, test first on an area hidden from view such as underneath the tabletop.
• Every 4 months, inspect the unit completely and make sure that all screws are tightened.
• When transporting the unit to places far away, protect and secure the unit to avoid damage in transit.

TECHNI MOBILI WARRANTY

DESKS/LAPTOP CARTS/FILE CABINETS: LIMITED 5-YEAR WARRANTY
RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA. Products or its authorized resellers that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein. “Defects” as used in this warranty, are defined as any imperfections that impair the use of the furniture or product. RTA Products LLC will replace any defective part, at its discretion, and without charge to the original purchaser other than the freight from the end consumer to RTA Products.

Replacement parts can only be supplied if parts are available. Items out of production may be unavailable. This warranty will be effective for the applicable period beginning the date of purchase on your original sales receipt. RTA product’s obligation under this warranty is limited to repairing or replacing products or parts as provided herein. This product has been designed for and is intended for office and home-office use only. This warranty is the Original Purchaser’s sole remedy for product defects, and this warranty does not extend to any product, or damage to any product, caused by or attributed to abuse or misuse, products used for commercial or rental purposes, use modifications of, or attachments to the product, and products or parts not used, maintained, or extended hereunder is instead of any other warranties, express or implied, including without limitations any implied warranty or merchantability or of fitness for a particular purpose. Please note, that all desks made with PVC Laminate surface should not be exposed to direct sunlight, as it may damage the material. Damage of this nature is not covered under this warranty.

RTA Products will not be responsible for indirect, special, incidental or consequential damages. This warranty is limited to merchandise purchased in the Continental United States and excludes AK, HI and PR. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights that may vary from state to state.

To file a Claim within the 48 contiguous United States:
Email us at [email protected] to explain the defect and provide your name, address, phone number, model number of our product, date and place, and proof of purchase. Please provide pictures of the damage or defect. If we determine that a replacement will remedy the situation, and determine the extent or the cause of the defect, the purchaser may be requested to send the part in question at the purchaser’s expense. Once we receive the part, we will examine it and determine whether the claim is valid (or not), and then proceed to send the replacement. We will ship the replacement at our expense.

Replacement Parts for International Customers & AK-HI-PR orders:
RTA Products will replace the part free of charge, while the customer is responsible for shipping costs plus any International and local taxes or duties.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>