TECHNI MOBILi RTA-B006 GPH06 Laptop Stand Instruction Manual
- June 15, 2024
- TECHNI MOBILi
Table of Contents
FOLDING TABLETOP LAPTOP CART
MODEL RTA-B006
ASSEMBLY INSTRUCTIONS
REV.OL-7284-0423
Thank you for purchasing our product
RTA-B006 GPH06 Laptop Stand
RTA-B006
FRENCH | ARABIC |
---|
https://cdn.shopify.com/s/files/1/2006/5615/files/
RTA-B006-FR.PDF?v=1682089149|
|
https://cdn.shopify.com/s/files/1/2006/5615/files/
RTA-B006-AR.PDF?v=1681936910
Scan QR to view the manual in French| | Scan QR to view the manual in Arabic
Do a quick inventory of all the parts and hardware listed below.
For Support, assembly questions & Replacement Parts within the 48 Contiguous United States:
Please email us at:
support@rtaproducts.com
Replacement Parts for International Customers & AK-HI-PR orders:
RTA Products will replace the part free of charge, while the customer is
responsible for shipping costs plus any International local taxes or duties.
MAIN PARTS LIST
MAIN PARTS LAYOUT (FOR REFERENCE):
LIST OF CREWS AND INCLUDED TOOLS
PART| QTY| ITEM|
---|---|---|---
A| 8| M6x35|
B| 6| M6x40 Bolt|
C| 16| M3x20|
D| 4| M6x12|
| 1| Screwdriver|
BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS.
- Please read the assembly instructions throughly and follow step by step.
- Make sure you understand which hardware will be used on each step. Using the wrong size of screw, bolt or pin might strip the threads or cause damage to the part in which it is being used.
- To avoid misalignments, always leave the screws loosely and do not tighten them until all the pieces are positioned correctly.
- Do not overtighten or force the screws as they might break, strip, damage the threads of the holes, or get stuck inside the parts.
- If the hole seems to small for the screw, make sure you are using the correct size of screw and/or that you are installing it in the correct hole.
- Sometimes on the wood panels the laminate or material might be covering the hole partially or entirely, if there is no visible hole or if it looks too small, pass and press the tip of your finger over the area to feel its indentation, and carefully pierce the laminate to uncover the hole underneath.
- After the item is assembled, you can use rubbing alcohol to erase or remove the visible part numbers printed or labeled on the pieces.
ASSEMBLY STEPS
WE RECOMMEND TO PLACE THE PIECES OVER BLANKETS TO PROTECT THEIR FINISH DURING
ASSEMBLY.
STEP 1
Assemble the lower panels to the top surface of the bottom panel1 with
screwsAfrom underneath.
STEP 2
Assemble the back panel 4 to the bottom panel 1 with screws A from
underneath.
STEP 3
Attach the bolts B to the top panels 5.
STEP 4
- On the upper side panels 6, check and make sure the cam locks are aligned to receive the bolts B from panels 5. If they are crooked, use the screwdriver to turn them and align them.
- Join panel 6 to panel 5 and then turn the cam locks to lock the parts.
STEP 5
Place the side panels and6side-by-side as shown in the illustration, then
attach the hinges 2 10 to these panels with screwsC.
STEP 6
Place the table top upside down and attach the mechanism 9 to the bottom
panel 1 with screws D making sure the handle faces towards the RIGHT of the
unit.
STEP 7
Insert the casters 3 into the holes of the base 7 using pressure.
STEP 8
Attach the cap 11 to the middle of the base 7.
NOTE: The cap 11 usually comes already inserted in the middle of the base
7, you can skip this step if that is the case.
STEP 9
Insert the lift cylinder 8 in the middle of the base 7, then place the
tabletop so the lift cylinder 8 enter into hole of the mechanism 9.
LIFT FUNCTION, NOTES
- The lift function on this unit is similar to that of office chairs. This means that just like a chair, the tabletop swivels (rotate) freely.
- To lift the unit just lift the handle UP. If it does not lift, keep the handle lifted and press down on the unit to help the cylinder decompress.
- To bring the unit down, lift the handle UP and at the same time apply force DOWN on the center of the tabletop
LIFT THE UNIT: Lift handle UP
LOWER THE UNIT: Lift handle UP and at the same time push DOWN on the center of the tabletop with force.
WEIGHT LIMITS
WARNINGS
- Do not exceed the indicated weight limits.
- Do not expose the surfaces to direct sunlight or to extreme environmental conditions.
- Do not use solvents or abrasive materials to clean the unit.
- Do not lean against the unit or usit as a stool or ladder.
- Do not allow small children to play with the unit.
- Always use good judgement when using the product and avoid sudden spins that might make objects or devices fall off the unit.
- Do not use if you notice that the hinges have become loose.
- The warranty does not extend to regular wear and tear, nor the manufacturer assumes liability for damages or consequences due to accidents, incorrect assembly, negligence, improper use, modifications, or not heeding the above warnings.
CARE AND MAINTENANCE
- Clean the surfaces preferable with a clean cloth damped in a solution of mild soap and water, then dry with a clean towel.
- If you decide to use a cleaning agent, test first on an area hidden from view such as underneath the tabletop.
- Every 4 months, inspect the unit completely and make sure that all screws are tighten.
- When transporting the unit to places far away, lower the unit to the lowest point or dissasemble it partially, and protect and secure the unit to avoid damage in transit.
TECHNI MOBILI WARRANTY
DESKS/LAPTOP CARTS/FILE CABINETS: LIMITED 5-YEAR WARRANTY
RTA Products, LLC warrants to the Original Purchaser who acquired a new
product from RTA Products or its authorized resellers that this product will
be free from defects in its workmanship and materials, under normal use and
service conditions, as described herein. “Defects” as used in this warranty,
is defined as any imperfections that impair the use of the furniture or
product. RTA Products LLC will replace any defective part, at its discretion,
and without charge to the original purchaser other than the freight from the
end consumer to RTA Products.
Replacement parts can only be supplied if parts are available. Items out of
production may be unavailable. This warranty will be effective for the
applicable time period beginning the date of purchase on your original sales
receipt. RTA product’s obligation under this warranty is limited to repairing
or replacing products or parts as provided herein. This product has been
designed for and is intended for office and home-office use only. This
warranty is Original Purchaser’s sole remedy for product defects, and this
warranty does not extend to any product, or damage to any product, caused by
or attributed to abuse or misuse, products used for commercial or rental
purposes, use modifications of, or attachments to the product, and products or
parts not used, maintained, or extended hereunder is in lieu of any and all
other warranties, express or implied, including without limitations any
implied warranty or merchantability or of fitness for a particular purpose.
Please note, all desks made with PVC Laminate surface should not be exposed to
direct sunlight, as it may damage the material. Damage of this nature is not
covered under this warranty.
RTA Products will not be responsible for indirect, special, incidental or
consequential damages. This warranty is limited to merchandise purchased in
the Continental United States, excludes AK, HI and PR. Some States do not
allow the exclusion or limitation of incidental or consequential damages, so
the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights. You may also have other rights that may vary from
state to state.
To file a Claim within the 48 contiguous United States:
Email us to warranty@rtaproducts.com to
explain the defect and provide your name, address, phone number, model number
of our product, date and place, and proof of purchase. Please provide pictures
of the damage or defect.If we determine that a replacement will remedy the
situation, and in order to determine the extent or the cause of the defect,
purchaser may be requested to send the part in question at purchaser’s
expense. Once we receive the part, we will examine it and determine whether
the claim is valid (or not), and then proceed to send the replacement. We will
ship the replacement at our expense.
Replacement Parts for International Customers & AK-HI-PR orders: RTA
Products will replace the part free of charge, while the customer is
responsible for shipping costs plus any International local taxes or duties.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>