REYEE RG-E6 Router User Manual

REYEE RG-E6 Router

Specifications

• Model: RG-E6 Router
• Package Contents : Router, Power Adapter, User Manual, Warranty Card, Network cable, Sympathy Card
• Manufacturer : Ireyee
• Website: https://www.ireyee.com

Connect Your Router

• If you use a modem for Internet access, power off your modem and remove the backup battery if it has one.
• If you do not have a modem, you can connect the Ethernet port in the wall directly to the WAN port of your router. Once connected, proceed to follow steps 3 and 4.

Set Up Your Router

Method 1: Via a Web Browser

1. Connect your smartphone or computer to the router using a wired or wireless connection.
   • For the wired connection, use an Ethernet cable to connect your computer’s Ethernet port to any LAN port on the router.
   • For the wireless connection, open Wi-Fi settings on your smartphone, and connect to the Wi-Fi network that starts with @Reyee. You can find the specific Wi-Fi name on the label at the bottom of the router indicated by SSID.
2. .Follow the instructions on the displayed setup page to complete the setup. If the setup page is not displayed, open a web browser, and enter 192.168.110.1 in the address bar.
   If you are still unable to access the setup page, see Q1 in the FAQ for further assistance.

Method 2: Via an App
Download the up-to-date Reyee Router App. Follow app instructions to complete setup.

Add a Reyee Unit

1. Set up the first router using Method 1 or Method 2.
2. If possible, power up the second router in the desired
   location, and connect the WAN port of the second router to the LAN port of the first router using an Ethernet cable. (Follow Step 3)
   If not, place the second router within 2 meters (78.74 in.) of the first router, and connect the second router to a power source. (Follow Steps 3 and

3. Connect the second router to a power source. After the second router has initialized successfully, press the
   Mesh button on the first router.
   After the Mesh LED on the second router turns from blinking to solid, the mesh connection between the two routers is established successfully.

4. Power off the second router, relocate it to the desired location, and power it on. Make sure that there are no more than two walls between two routers.

5. After the mesh network setup is successful, the Wi-Fi name and password of the second router will be the same as those of the first router.

6. Before creating a mesh network, make sure that the second router has not been configured before. If you are uncertain, restore the second router to factory defaults by pressing the Reset button for more than 10 seconds.
   For more details, please visit https://www.ireyee.com.

Safety Information

• Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions.
• Please carefully check the ideal operating temperature and storage temperature on the user guide. Extreme heat or cold may damage your device or accessories.
• The device should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
• Using an unapproved or incompatible power adapter, charger, power cord, cable, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.
• For pluggable devices, the socket outlet shall be installed near the devices and shall be easily accessible.
• The adapter shall be installed near the equipment and shall be easily accessible.
• Do not touch the device or the charger with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.
• If the product or external adapter includes one three-pole AC inlet, then plug the product into the wall outlets with an earthing connection through the power supply cord provided by the manufacturer.
• Do not block any ventilation openings. Install this apparatus under the manufacturer’s instructions.
• Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Users should only use power adaptors, attachments, and accessories supplied or specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over

FCC Compliance Statements

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

ISED Compliance Statements
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1 )This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.

FAQ

• Q1: What should I do if I fail to log in to the web interface?

  • Restart the router.
  • Configure your computer to obtain an IP address automatically.
  • Make sure that the URL in the address bar of your browser is entered correctly. The default URL is http://192.168.110.1.
  • Use another browser to try again. We recommend using Google Chrome.
  • Unplug the Ethernet cable connecting your computer and the router. Then, plug it back in to establish a fresh connection.
  • Restore the router to factory defaults.

• Q2: What should I do if I cannot access the Internet?

  • Power off the modem and wait for 5 minutes. Then, power on the modem, and check the network connection. If your modem has multiple Ethernet ports, keep other ports disconnected or unused during this process.

  • Check whether your computer can access the Internet by directly connecting it to the modem. If not, please contact your Internet service provider.

  • Log in to the web interface of your router, and check whether the WAN port has obtained an IP address. If so, choose More >
    WAN and configure commonly used local DNS addresses such as 8.8.8.8. If the WAN port has not obtained an IP address, see “1.
    Connect Your Router” or contact your Internet service provider.

  • If you use a modem for Internet service, log in to the web interface of your router, choose More > WAN, and set the MAC  address of the WAN port to be the MAC address of the old router. You can usually find the MAC address on the label at the bottom of the router.

• Q3: What should I do if I forget the management password of the router?

  • If you haven’t bound the router to Reyee Router App and you are still unable to log in using the Wi-Fi password, try restoring the
    router to factory defaults.

  • If you have previously bound the router to Reyee Router App, you can open Reyee Router App, and change the management
    password by choosing Settings > Advanced > Management Password.

• Q4:Where should I place the router for better wireless coverage?

  • Do not place the router in a corner or inside a network enclosure.
  • Keep the router away from obstacles and high-powered appliances that may obstruct signals.
  • Place the router on a desktop, and keep the antennas vertically upwards.

• Q1: What should I do if I fail to log in to the web interface?
  

  • If you are unable to log in, please check your network connection and ensure you are using the correct IP address (192.168.110.1). If issues persist, contact tech support.

• Q2: What should I do if I cannot access the Internet?
  

  • If you are having internet connectivity issues, check your modem connection and restart both your modem and router. Ensure all cables are securely connected.

• Q3: What should I do if I forget the management password of the router?
  

  • If you forget your password, you may need to reset your router to factory settings. Refer to the user manual for instructions on how to reset your device.

• Q4: Where should I place the router for better wireless coverage?
  

  • To optimize wireless coverage, place your router in a central location away from obstructions such as walls and metal objects. Elevating the router can also improve signal strength.

References

• Reyee Networks | Redefine Your Easy Network

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>