ORTECH CP-4 LED Slim Light Instruction Manual
- June 17, 2024
- Ortech
Table of Contents
ORTECH CP-4 LED Slim Light
SAFETY WARNING
WARNING
THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.
- LED Slim Lights are suitable for indoor use only. DO NOT use outdoors
- Please keep the LED Slim Lights away from any corrosive substance, and please use a dry cloth when you clean them
- LED Slim Lights can only be installed by a qualified electrician
- Before installation or maintenance, please disconnect the power to prevent electric shock
APPLICATION NOTICE
- For your safety, this fixture MUST be wired under electrical codes and ordinances
- DO NOT open the light fixture and the side plates of the driver – no serviceable part inside
- DO NOT use any other driver except the ones advised by the supplier
- DO NOT connect multiple fixtures to one driver
CAUTION
PLEASE READ THE INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN THEM
FOR FUTURE REFERENCE. Electrical products can cause death injury, or property
damage. If in any doubt about the installation or use of this product, consult
a competent electrician.
INSTALLATION GUIDE
- STEP 1: Attach the mounting bracket to a 3/” or 4″ round or octagonal box with the screws provided. The “A” side of the bar is for a flat ceiling and the “B” side is for an uneven or textured ceiling.
- STEP 2: On a flat ceiling, push the screw on the cover into the opening of the bracket to the cover. On a textured ceiling, screw the cover into the opening until it is tight against the ceiling.
- STEP 3: The cover can be removed by either pulling down on the cover or by unscrewing it on an uneven or textured ceiling.
Contact Information
- Web: www.ortechindustries.ca
- Phone: 1.888.543.6473/604.543.6473
- 13376 Comber Way, Surrey, BC V3W 5V9/205 Summerlea Road, Brampton, Ontario
- info@ortechindustries.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>