rapoo MT750S Multi Mode Wireless Mouse User Guide
- June 3, 2024
- rapoo
Table of Contents
rapoo MT750S Multi Mode Wireless Mouse
Overview
- A Scroll wheel
- B DPI switching button
- C DPI LED
- D Device light
- E Device switching button
- F USB port
- G On/off switch
- H Side scroll wheel
- I Forward button
- J Back button
- k Low power
Instruction
2.4G
- Plug in Rapoo receiver.
- Turn on MT750S.
- Done
Bluetooth 3.0 and 4.0
1. Turn on MT750S. Device light starts to blink rapidly.
2. Press the device switch button to select the device channel.
3. Keep pressing the device switch button at least 3 seconds to Bluetooth
pairing.
4. Connect MT750S with your Bluetooth device. Blinking stops.
5. Done.
Package contents
System Requirements
- Windows® XP/Vista/7/8/10 or later, USB port
Side scroll wheel
Scroll horizontally by default. Set up customize functions via driver
Switch among devices
Press device switching button to switch among up to 4 devices including a 2.4G device and 3 Bluetooth devices
Device light
Three device lights stand for three different Bluetooth devices.
- When MT750S connects with a 2.4G device, 3 device lights are off.
- When MT750S is trying to connect back with a device, the device light starts to blink rapidly.
- When MT750S is pairing with a Bluetooth device, the device light starts to blink slowly.
- Bluetooth device connected: The indicator light of the appropriate device is on for 6 seconds when the mouse is picked up.
Status LED
-
2.4G indicator
Green LED blinks once. -
DPI switching indicator
Green LED blinks. It blinks once when you switch to the first DPI, blinks twice for the second DPI, blinks three times for the third DPI and blinks four times for the fourth DPI. -
Low power indicator
Red LED blinks twice rapidly every two seconds when MT750S is working. -
Charging indicator
When MT750S is charging, green LED is on. When it is fully charged, green LED is off.
Warranty
The device is provided with two-year limited hardware warranty from the purchase day. Please see www.rapoo.com for more information.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
ISEDC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference,including interference that may cause undesired operation of the device.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
It is forbidden to reproduce any part of this quick start guide without the permission of Shenzhen Rapoo Technology Co., Ltd.
Declaration of Conformity
We, the manufacturer Shenzhen Rapoo Technology Co., Ltd.
Fax : +86-0755-2858 8555
Declare that the product
Product Name ：Multi-mode Wireless Mouse
Model No ：MT750S
Complies with the following norms of :
- EN 300 440 V2.1.1(2017-03)
- EN 300 328 V2.1.1(2016-11)
- EN 301 489-1 V2.2.0(2017-03)
- EN 301 489-3 V2.1.1(2017-03)
- EN 301 489-17 V3.2.0(2017-03)
- EN 50663:2017
- EN 50663:2017
- EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
The product is in compliance with the essential requirements of Radio
Equipment Directive 2014/53/EU,and the RoHS Directive 2011/65/EU.
Manufacturer/Authorised representative
Kai Guo, Manager
R&D Department Date of Issue: Aug. 30, 2017
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>