BRAYER BR1402 Chopper Instruction Manual
- October 26, 2023
- BRAYER
Table of Contents
CHOPPER BR1402
Instruction manual
The chopper is intended for chopping vegetables, fruit, herbs, onion, garlic, and small amounts of meat, and for making sauces.
DESCRIPTION
Seasoning Electric Smoker – 5 Hel...
Seasoning Electric Smoker – 5 Helpful Guide for Beginners
- Motor unit
- Bowl lid
- Chopping knives
- Chopper bowl
- Bowl lid
SAFETY MEASURES AND OPERATION RECOMMENDATIONS
Read the operation manual carefully before using the unit; after reading, keep it for future reference.
- Use the unit for its intended purpose only, as specified in this manual.
- Mishandling the unit can lead to its breakage and cause harm to the user or damage to the user’s property, which is not covered by warranty.
- Make sure that the operating voltage of the unit indicated on the label corresponds to your home mains voltage.
ATTENTION! The continuous operation time of the chopper should not exceed 1 minute, after that make at least 5 minutes break.
- Place and use the unit on a flat dry and steady surface.
- Use only the removable parts supplied with the chopper.
- Before switching the chopper on, make sure that all removable parts are installed properly.
- Before using the chopper for the first time, wash all the removable parts that will contact with food.
- Put the products in the chopper bowl before switching the unit on. do not switch the unit on if the chopper bowl is empty.
- Cool down hot products before putting them into the chopper bowl.
- Watch the number of products put in the chopper bowl and the level of poured liquids.
- Before using the unit make sure that the chopping knives are installed properly.
- The cutting edges of the chopping knives are sharp and dangerous, handle the knives carefully.
- If the chopping knives stop rotating during the unit operation, switch the unit off, unplug it and remove the motor unit and the lid, remove the product which is hindering the chopping knives’ rotation. If the chopping knife’s rotation is hindered, it is recommended to add some water, juice, liquor, etc. into the chopper bowl.
- Remove the motor unit of the chopper only after the complete stop of the chopping knife rotation and after the unit is unplugged.
- do not use the unit outdoors.
- It is not recommended to use the unit during lightning storms.
- Protect the unit from impacts, falling, vibrations, and other mechanical stress.
- Never leave the unit connected to the mains unattended.
- do not use the unit near heating appliances, heat sources, or open flames.
- do not use the unit in places where aerosols are used or sprayed and close to inflammable liquids.
- Do not use the unit in proximity to the kitchen sink, bathrooms, swimming pools, or other containers filled with water.
- If the unit is dropped into water, unplug it immediately, and only then you can take the unit out of the water.
- do not let the power cord touch hot surfaces and sharp edges of furniture.
- Unplug the unit after usage or before cleaning. When unplugging the unit, hold the power plug and carefully remove it from the mains socket, do not pull the power cord, as this can lead to its damage and cause a short circuit.
- Do not touch the mixer body, the power cord, and the power plug with wet hands.
- For a child, for safety reasons do not leave polyethylene bags used as packaging unattended.
ATTENTION!
do not allow children to play with polyethylene bags or packaging film. The
danger of suffocation!
- The unit is not intended for use by children.
- do not leave children unattended to prevent using the unit as a toy.
- do not allow children to touch the operating surface, unit body, power cord, or power plug during the operation of the unit.
- Close supervision is necessary when children or disabled persons are near the operating unit.
- During the unit’s operation and breaks between operation cycles, place the unit out of reach of children.
- The unit is not intended for usage by physically or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under the supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the unit.
- Regularly check the integrity of the power cord.
- If the power cord is damaged, it should be replaced by the manufacturer, maintenance service, or similarly qualified personnel, to avoid danger.
- do not repair the unit by yourself. do not disassemble the unit by yourself; in case of any malfunction or if the unit is dropped, unplug it and apply it to the service center.
- To avoid damages, transport the unit in its original package only.
- keep the unit in a dry cool place out of reach of children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE ONLY
BEFORE THE FIRST USE
After the unit’s transportation or storage at a negative temperature, unpack
it and wait for 3 hours before using it.
- Unpack the unit and remove all the packaging materials.
- keep the original package.
- Check the delivery set.
- Read the safety measures and operating recommendations.
- Examine the unit for damages; if the unit is damaged, do not plug it into the mains.
- Make sure that the indicated specifications of the power supply voltage of the unit correspond to the specifications of your mains. When the unit is used in the mains with a 60 Hz frequency, it does not need any additional settings.
- Wash the bowl (4), and the lids (2, 5) with warm water and neutral detergent, rinse, and dry.
- Wash the chopping knives (3) with warm water and neutral detergent, rinse and dry.
- The cutting edges of the chopping knives (3) are sharp and can be dangerous, handle the chopping knives (3) carefully.
- Wipe the motor unit body (1) with a soft, slightly damp cloth, and then wipe it dry.
- Do not immerse the unit, the power cord, and the power plug of the unit in water or other liquids.
USING THE CHOPPER
-
The chopper is intended for chopping vegetables, fruit, herbs, onion, garlic, and small amounts of meat, and for making sauces.
ATTENTION!
The continuous operation time of the chopper should not exceed 1 minute, after that make at least 5 minutes break. -
Do not chop very hard products, such as nutmeg, coffee beans, cereals, ice, and frozen food.
-
Notes: — when using the unit for the first time, a foreign smell from the electric motor can appear — this is normal and it is not covered by warranty.
BEFORE PROCESSING THE PRODUCTS:
- remove bones, fat, and sinews from meat, and cut the meat, cheese, onion, vegetables, and fruit into cubes approximately 1,5×1,5 cm;
- shell the nuts, remove stems from herbs;
FOOD PROCESSING
- Before assembling the chopper make sure that the power plug is not inserted into the mains socket.
- Place the bowl (4) on a flat dry and steady surface.
- Install the chopping knives (3) on the axis inside the bowl (4). Be careful: the chopping knives (3) are sharp, always hold the chopping knives (3) by the plastic end.
- Put the pre-cut products into the bowl (4).
Notes:
– do not switch the chopper on if bowl (4) is empty.
– the amount of food for processing should not exceed 2/3 of the capacity of
the bowl (4) and should not be below the blades of the chopping knives (3).
- Install the lid (2) on the bowl (4).
- Install the motor unit (1) on the lid (2).
- Insert the power plug into the main socket.
- To switch the chopper on press on the motor unit (1) and hold it pressed.
- During the operation press on the motor unit (1) with one hand and hold the bowl (4) with the other.
- Notes: — if food processing is hindered or the product level is below the chopping knife (3) edges, you can add some water, juice, broth, etc.
- After using the chopper wait until the chopping knives (3) fully stop rotating.
- Remove the power plug from the main socket.
- Remove the motor unit (1).
- Remove the lid (2) from the bowl (4).
- Take the plastic end and remove the chopping knives (3) from the bowl (4).
- Take the chopped products out of the bowl (4).
USING THE LID (5)
- After processing the food remove the motor unit (1) and the lid (2), and remove the chopping knives (3).
- Cover bowl (4) with the lid (5) and put bowl (4) in the fridge for storage.
CLEANING AND MAINTENANCE
ATTENTION!
The blades of the chopping knives (3) are very sharp and dangerous. Handle the
chopping knives (3) carefully.
- Unplug the chopper before cleaning.
- Remove the motor unit (1).
- Remove the lid (2) from the bowl (4).
- Carefully remove the chopping knives (3).
- Wash the parts (2, 4) with warm water and neutral detergent, rinse and dry.
- Wash the chopping knives (3) with warm water and neutral detergent, rinse and dry.
- Clean the motor unit (1) with a soft, slightly damp cloth and then wipe it dry.
- Do not immerse the motor unit (1) in water or any other liquids.
- Do not use abrasives and solvents to clean the motor unit (1) and the removable parts.
- After processing salty or sour products rinse the chopping knives (3) with warm water.
- After processing products with strong dyeing properties (for instance, carrot or beet-root) the removable parts can get colored. To clean the removable parts wipe them with a dry cloth, dampened them in vegetable oil, and then wash them with warm water and neutral detergent, rinse and dry.
- Do not use abrasives and solvents to clean the motor unit body (1) and the removable parts.
STORAGE
- Clean the chopper before taking it away for storage.
- keep the unit in a dry cool place out of reach of children and disabled persons.
DELIVERY SET
- Chopper assembled — 1 pc.
- Lid — 1 pc.
- Manual — 1 pc.
TECHNICAL SPECIFICATIONS
- Supply voltage: 220-240 V ~ 50/60 Hz
- Rated input power: 300 W
- Maximal operation time: — 1 minute
RECYCLING
To prevent possible damage to the environment or harm to the health of people
by uncontrolled waste disposal, after the expiration of the service life of
the unit or the batteries (if included), do not discard them with usual
household waste, but take the unit and the batteries to specialized stations
for further recycling. The waste generated during the disposal of the unit is
subject to mandatory collection and consequent disposal in the prescribed
manner.
For further information about recycling this product apply to a local
municipal administration, a disposal service, or to the shop where you
purchased this product.
The manufacturer reserves the right to change the appearance, design, and
specifications not affecting the general operating principles of the unit,
without prior notice.
The unit operating life is 3 years
The manufacturing date is specified in the serial number.
In case of any malfunctions promptly apply to the authorized service center.
