CRYSTORAMA ADD-300-AG-AM Lighting Stores Ottawa Instruction Manual
- June 17, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA ADD-300-AG-AM Lighting Stores Ottawa
WARNING
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need a 4-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This Fixture is Dry Rated.
ASSEMBLY INSTRUCTION
How to Install
For Pendant
- Decide the preferred hanging height and choose the correct number of rods needed.
- Feed the wires through the rods, screw collar ring and canopy (with a bigger centre hole). Screw the rods together. Screw one end of the rod assembly onto the top of the frame and the other end onto the swivel on the mounting strap.
- Attach the mounting strap to the outlet box.
- Raise the fixture up to the ceiling and do the wire connections. Slip the canopy up along the rods and over the mounting strap. Secure with the screw collar ring.
- Install the bulb into the socket.
- Dress the glass as illustrated.
Glass Sets
- 24 pcs Amber glass 2 3/4×7 3/4”
WARNING:
This product can expose you to Lead, which is known to the State of California
to cause cancer and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov.
For Ceiling
- How to Install
- Screw the canopy kit (with a smaller centre hole) onto the frame.
- Attach the mounting strap to the outlet box.
- Raise the fixture to the ceiling and over the mounting strap. When the wire connection is made, secure the canopy with two ball nuts.
- Install the bulb into the socket.
- Dress the glass as illustrated.
Part Numbers
- A. (1)-Canopy, D 5 1/8XH1″ XBN300AGCAN5.125IN
- B. (1)-Collar ring
- C. (1)-Swivel
- D. (1) – 6″ Rod – XBN300AGROD6IN
- E. (3) – 12″ Rods – XBN300AGROD12IN
- F. (1)-Frame
- G. (24)-Glass, D2 3/4xH7 3/4″ XBN300AGAMGLA7.75IN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>