BOYA BY-XM6-S1 2.4GHz Ultra Compact Wireless Microphone System User Manual

BOYA BY-XM6-S1 2.4GHz Ultra Compact Wireless Microphone System

General Introduction

BOYA BY-XM6 systems are incredibly lightweight, ultracompact and easy-to-use wireless microphone systems for up to 2 people.
The microphone delivers exceptional, broadcast-quality sound to DSLR, mirrorless and video cameras, smartphones, tablets, computers, etc.
It is ideal for content creation, vlogging, mobile journalism, and more.

Available Kits

Product Structure

Wireless Transmitter BY-XM6 TX

1. OLED display
   – For more details, please refer to “OLEO Display Operation Guide”.

2. Belt clip

3. Charging contacts

4. Power/Mute button
   Function| Operation
   ---|---
   Power ON| ****

Long press

Power OFF
Mute ON| ****

Short press

Mute OFF

Note:
The function of mute is disabled by default, please enable it manually in the menu if necessary.

5. +/SET button
   Function| Operation
   ---|---
   +| On home screen, short press to adjust mic gain.
   On menu screen, short press to select different functions or values shown on the display.
   SET| On home screen, long press to enter the menu screen.
   On menu screen, long press to enter the displayed menu.
   Then, long press again to confirm your option.

6. – button
   – On home screen, short press to adjust mic gain.
   – On menu screen, short press to select different functions or values shown on the display;
   – long press to return to home screen.

7. USB-C charging port (DC 5V)
   

8. Built-in microphone

9. MIC/LINE IN jack
   – It can be connected to the supplied 3.5mm lava lier microphone, or other 3.5mm TRS microphones or line-in devices.

Wireless Receiver BY-XM6 RX

1. OLED display
   – For more details, please refer to “OLED Display Operation Guide”.

2. Belt clip

3. Charging contacts

4. Power/Mute button
   Function| Operation
   ---|---
   Power ON| ****

Long press

Power OFF
Mut e ON| ****

Short press

Mute OFF

Note:
The function of mute is disabled by default, please enable it manually in the menu if necessary.

5. +/SET button
   Function| Operation
   ---|---
   +| On home screen, short press to increase volume.
   On menu screen, short press to select different functions or values shown on the display.
   SET| On home screen, long press to enter the menu screen.
   On menu screen, long press to enter the displayed menu.

Then, long press again to confirm your option.

6. -button
   – On home screen, short press to decrease volume.
   – On menu screen, short press to select different functions or values shown on the display;
   – long press to return to home screen.

7. USB-C charging port (DC 5V)
   

8. 3.5mm headphone output
   – Connect headphones for audio monitoring.

9. LINE OUT jack
   – Connect the BY-XM6 RX to a smartphone, tablet, camera, recorder or mixer with the supplied output cables.

BY-XM6 RXD: Compact Receiver with Lightning Connector

1. Lightning connector
   – It can be connected to an iOS Lightning device.

2. Status indicator
   Status| Indicator
   ---|---
   Unpaired| Slowly flashing blue light
   Pairing| Quickly flashing blue light
   Paired Successfully| Solid blue light

3. Pair button

4. Mono/Stereo switch
   – The output mode can be toggled between mono and stereo.
   When in mono mode, the audio from the left and right channel will be mixed. When in stereo mode, the audio from the left and right channel will be separated to the left and right of the stereo output.

5. 3.5mm headphone jack
   – Connect headphones for audio monitoring.

BY-XM6 RXU: Compact Receiver with USB-C Connector

1. USB-C connector
   – It can be connected to an Android smartphone, tablet or other USB-C devices.

2. Status indicator
   Status| Indicator
   ---|---
   Unpaired| Slowly flashing blue light
   Pairing| Quickly flashing blue light
   Paired Successfully| Solid blue light

3. Pair button

4. Mono/Stereo switch
   – The output mode can be toggled between mono and stereo.
   When in mono mode, the audio from the left and right channel will be mixed. When in stereo mode, the audio from the left and right channel will be separated to the left and right of the stereo output.

5. 3.5mm headphone jack
   – Connect headphones for audio monitoring.

OLEO Display Operation Guide

Wireless Transmitter BY-XM6 TX Home screen

If no operation is performed within 20 seconds on other screens, the display will automatically return to home screen.

1. Pairing indicator
   Paired successfully
   Disconnected
   Pairing

2. Input mode & Mute indicator
   Mic in
   Line in
   MUTE Mute ON

3. Mic gain
   Displays the TX transmitter’s mic gain level on home screen, press +/- button to adjust the microphones’ input gain level.

4. Audio input level meter
   Displays the audio input level.

5. TX’s battery level indicator
   Displays the TX battery level. Please recharge the device immediately when the indicator starts flashing.

Menu screen

On home screen, long press SET button to enter menu screen.
On menu screen, long press – button to return to home screen.

Connect Setting

Pair with the receiver. For details of operation, please refer to “Operation Guide”.

Backlight Setting

Set backlight to always on or on for 10/30/60 seconds. Defa u It is “On”.

Mute Key Setting

Enable or disable mute key button function.
Default is “Disable”.

Mic Gain Setting

Adjust the microphone input gain level (0-6).
Default is “5”.

Input Mode Setting

The input mode can be selected to Mic In or Line In. When Mic In mode selected, the transmitter can be connected to the supplied lavalier microphone, or other microphones with a 3.5mm TRS output.
When Line In mode selected, the transmitter can be connected to line-level output devices.
Default is “Mic In”.

Language Setting

English or Chinese are available.
Default is English.

Restore Default Setting

Version of the BY-XM6 TX

Wireless Receiver BY-XM6 RX

Home screen

If no operation is performed within 20 seconds on other screens, the display will automatically return to home screen.

1. Pairing indicator
   Paired successfully
   Disconnected
   Pairing

2. RX’s output mode
   M : Mono
   S : Stereo

3. Output volume & Mute indicator
   on home screen, press+/- button to adjust the volume.
   Mute ON
   Mute OFF

4. RX’s battery level indicator
   Displays the RX battery level. Please recharge the device immediately when the indicator starts flashing.

5. Audio input level meter
   Displays the audio input level.

Menu screen

On home screen, long press SET button to enter menu screen.
On menu screen, long press – button to return to home screen .

Connect Setting

Pair with the transmitter. For details of operation, please refer to “Operation Guide” .

Backlight Setting

Set backlight to always on or on for 10/30/60 seconds.
Defaults is “On”.

Mute Key Setting

Enable or disable mute key button function.
Default is “Disable”.

Output Volume Setting

Output volume can be set from Oto 6.
Default is “5” .

Output Mode Setting

The output mode can be set to either mono or stereo. When in mono mode, the audio from the transmitter, or transmitters will be mixed to both the left and right sides. When in stereo mode, the two transmitters’ audio output will be separated to the left and right sides.
Default is mono.

Language Setting

English or Chinese are available.
Default is English .

Restore Default Setting

Version of the BY-XM6 RX

Operation Guide

For the BY-XM6-S1 /BY-XM6-S2 kit

1. Long press the power button to turn on the transmitter and the receiver.

2. Pairing
   Before leaving factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow below steps:

3. Long press the SET button to enter menu screen.

4. Use the + or -button to display the Connect setting menu on both transmitter and receiver.
   RX
   
   TX
   

5. Long press the SET button to select the menu.
   RX
   
   TX
   

6. Select Yes, and long press the SET button to confirm.

7. Transmitter and receiver will be successfully paired within 1 Os.

8. Connect the receiver to the mic input of a camera, recorder or mixer with the supplied 3.5mm TRS cable. Or connect the RX to a smartphone, tablet, or computer with the supplied 3.5mm TRS to TRRS cable.

9. You are ready to record.

For the BY-XM6-S3/BY-XM6-S4/BY-XM6-SS/BY-XM6-S6 kit

1. Long press the power button to turn on the transmitter.

2. Plug the RXD into an iOS device or the RXU into an USB-C device.

3. Pairing
   Before leaving factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow below steps:

4. Long press the TX’s SET button to enter menu screen

5. Use the + or -button to display the Connect setting menu
   

6. Long press the SET button to select the menu.
   

7. Select Yes, and long press the SET button to confirm. The transmitter enters pairing mode.

8. hen, press and hold the Pair button of the RXD/RXU for 3 seconds to enable pairing mode. The indicator will flash blue rapidly.

9. Transmitter and receiver will be successfully paired within 10s. The indicator of the receiver will turn solid blue, while the indicator on the transmitter will change to .

10. You are ready to record.

Specifications

BY-XM6 TX Transmitter

obstacle)
RF Output Power| < 10mW
P o l ar Patt e rn| Omnid ir ect ion a l
Fr e qu e ncy R es p o n se| 35Hz- 18KHz
Maximum SP L| Built- in Microphone: 120 dB SPL
Lavali e r M i crophone: 11 0 dB SPL
Sensitivity| Built – in M i crop hon e : -3 9d8
L ava li er M i cro ph o n e : -39 dB
SNR| > 8 4dB
P owe r R eq ui reme nts| Built – in Li – i o n B a tt e r y o r USB -C DC S V or Charging Contact
Built-in Battery Life| A pp rox . 7 h o urs
Antenna| PIFA A nt e nna
Audio Input s| 3.5mm TRS MIC/ LINE IN Jack or Built -in Microphone
Weight| Approx. 32g(1.13oz)
Dim e nsion s| 62.1×3 1.6x 16.5mm
Operat i ng T empe r a tur e| – 10°C to 50°C
Storage Temperatur e| – 20°C to +55°C

BY-XM6 RX Receiver

3.5mm TRS Output Jack
Audio Output Level| -60 dBV to -20dBV
Power Requirements| Built-in Li-ion Battery or USB-C DC SVor Charging Contact
Built-in Batt e ry Life| Approx. 7 hours
Antenna| PIFA Antenna
Weight| Approx. 32g (1.1 3oz)
Dimensions| 62.1 x 31.6 x 16.5mm
Operating T empe ratur e| – 10°C to S0°C
Storage Temperature| – 2 0°C to + 55 °C

BY-XM6 RXD Receiver

Lightning Connector
Power Requirements| Supplied by iOS Devices
Antenna| PIFA
Weight| 14.5g (0 .51oz)
Dimensions| 75.6 x 23.15 x 12mm

BY-XM6 RXU Receiver

USB-C Connector
Power R e quir e m e nt s| Supplied by USB-C Devices
Antenna| PIFA
Weight| 14.Sg (0.51oz)
Dim ens ions| 75.6 x 23.15 x 12mm

Features

• 2.4GHz wireless transmission technology
• Ideal for content creation, vlogging, mobile journalism, and more
• Delivers exceptional, broadcast-quality sound
• Ultracompact clip-on transmitter and dual-channel receiver
• Easy-to-use OLEO display
• Real-time headphone monitoring
• Operating range of up to 1 00m
• High-quality built-in microphone
• Lavalier microphone included
• Selectable mono/stereo output

Packing List

BY-XM6-S1 (1 xBY-XM6 TX+ 1 xBY-XM6 RX)

• 1 x BY-XM6 TX Transmitter
• 1 x BY-XM6 RX Receiver
• 2x USB-C Charging Cable
• 1 x Lavalier Microphone
• 1 x Mic Clip for Lava lier Microphone
• 1 x Foam Windscreen for Lavalier Microphone
• 1x Fur Windshield for Built-in Microphone
• 1 x 3.5mm TRS to TRS Output Cable for Cameras
• 1 x 3.5mm TRS to TRRS Output Cable for Smartphones

BY-XM6-S2 (2xBY-XM6 TX + 1 xBY-XM6 RX)

• 2x BY-XM6 TX Transmitter
• 1 x BY-XM6 RX Receiver
• 1 x USB-A to Triple Head USB-C Charging Cable
• 2x Lavalier Microphone
• 2x Mic Clip for Lava lier Microphone
• 2x Foam Windscreen for Lavalier Microphone
• 2x Fur Windshield for Built-in Microphone
• 1 x 3.5mm TRS to TRS Output Cable for Cameras
• 1 x 3.5mm TRS to TRRS Output Cable for Smartphones

BY-XM6-S3 (1 xBY-XM6 TX+ 1 xBY-XM6 RXD)

• 1 x BY-XM6 TX Transmitter
• 1 x BY-XM6 RXD Receiver
• 1 x USB-C Charging Cable
• 1 x Lava lier Microphone
• 1 x Mic Clip for Lavalier Microphone
• 1 x Foam Windscreen for Lavalier Microphone
• 1 x Fur Windshield for Built-in Microphone

BY-XM6-S4 (2xBY-XM6 TX + 1 xBY-XM6 RXD)

• 2x BY-XM6 TX Transmitter
• 1 x BY-XM6 RXD Receiver
• 2x USB-C Charging Cable
• 2x Lava lier Microphone
• 2x Mic Clip for Lavalier Microphone
• 2x Foam Windscreen for Lavalier Microphone
• 2x Fur Windshield for Built-in Microphone

BY-XM6-S5 (1 xBY-XM6 TX+ 1 xBY-XM6 RXU)

• 1 x BY-XM6 TX Transmitter
• 1 x BY-XM6 RXU Receiver
• 1 x USB-C Charging Cable
• 1 x Lava lier Microphone
• 1 x Mic Clip for Lavalier Microphone
• 1 x Foam Windscreen for Lavalier Microphone
• 1 x Fur Windshield for Built-in Microphone

BY-XM6-S6 (2xBY-XM6 TX + 1 xBY-XM6 RXU)

• 2x BY-XM6 TX Transmitter
• 1 x BY-XM6 RXU Receiver
• 2x USB-C Charging Cable
• 2x Lava lier Microphone
• 2x Mic Clip for Lava lier Microphone
• 2x Foam Windscreen for Lavalier Microphone
• 2x Fur Windshield for Built-in Microphone

Customer Support

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by
Shenzhen Jiayz Photo Industrial., Ltd.
TEL: 400 6131096
Email : sales@boya-mic.com
www.boya-mic.com/ www.jiayz.com

1F0300300524

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>